GEU(N)52 2023 24PROVN OF COLOUR COATED GALVANISED STEEL SHEET ROOF AT BLDG NO NP44 NP45 AND NP47 FOOTPATH AT NCVD AND VITRIFIED TILE WORK IN BLDG NO P09 DRAINAGE AT ASC BN MT AND ADDN ALTN TO BLDG NO P07 ADM BLOCK EME BN UNDER GE (NORTH)UDHAMPUR

Amount

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in any type soil complete all as per specified & directed by Engr-in-Charge

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in any type of soil.

Returning, filling in including spreading leveling and watering and well ramming in layers not exceeding 25cm.

Removing excavated material n.exc 50m & depositing where directed at a level n.exc 1.5m above the starting point complete all as per specified & directed by Engr-in-Charge

M&L Hardcore of broken stone or boulders of gauge n. exc. 63mm ,deposited spread and levelled in layers n. exc. 15 cm thick,watered and rammed to a true surface all as specified & directed by Engr-in-Charge

M&L PCC (1:4:8) Type D-2 (using 40 mm graded crushed stone aggregate) as in floors Or Subbase 75 mm thick complete all as specified & directed by Engr-in-Charge

M&L Machine pressed precast interlocking paver blocks any shape and size with grey Cement and Pigment conforming to IS 15658-2006 of 60mm thickness (M-35Grade) complete all as specified & directed by Engr-in-Charge

M&L for Sand cushoning bed (filling under floors) incl spreading levelling watering if required complete all as specified & directed by Engr-in-Charge

Providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb stones, copings and in similar works bedded and jointed in CM 1:4 incl necessary formwork complete all as per specification and as directed.

Dismantling of wrought iron or mild steel work of any description complete all as specified and directed by engr-in-charge.

S&F rolled mild steel Roof trusses (framed) trusses purlins cranes / ganttries , rails & fastering & heavy bracket cleats (including distanence pieces cleats etc) Fe-410W (Gde-E-250 quality-A) complete all as per specified and directed by engr-in-charge.

Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc.complete all as per specified and directed by engr-in-charge.

M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement. Complete all as per specified & directed by Engr-in-Charge

M&L for 15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound on external surfaces of walls complete all as per specified and directed by engr-in-charge.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete spray painting all as specified & directed by Engr-in-Charge

M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified & directed by Engr-in-Charge.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, stuctural steel frame , etc all as specified & directed by Engr-in-Charge.

S/F 6mm thick Non asbestos fibre cement building boards fixed or laid/screwed to timber /GI/ Aluminium grid/ framework with screws all as specified & directed by Engr-in-Charge.

S/F Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling all as specified & directed by Engr-in-Charge.

Dismantling of CGI/ACC sheet of any description including ridges, all as per specified and directed by Engr-in-Charge

S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as per specified & directed by Engr-in-Charge

S&F in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as per specified & directed by Engr-in-Charge

Demolition of brick work or stone masonry built in CM mortar including all quions arches pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as specified & directed by Engr-in-Charge

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as per specified & directed by Engr-in-Charge

M&L Prep of new decorated surfaces of wall and applying two coat of distemper oil emulsion on walls over a coat of primer over 1 mm thick wall care putty complete all as specified and directed by engr-in-charge

M & L two coat of cement base paint over newly plastered surfaces of wall including one coat of primer and preparing surfaces complete all as per specified and directed by engr-in-charge.

Demolition of cement concrete (Unreinforced) ground floor n.exc 15cm thickness at any situation all as per specified and directed by Engr-in-Charge

M&L for Vitrifired ceramic coloured tiles 8mm thick (square) polished, light shade, area of each tiles exc 0.18 sqm but n.exc 0.36sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick screeed bed including skirting in CM (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 25mm thick (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in floor finished fair and even smooth without using extra cement complete all as specified and directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding complete, removing rubbish off the premises, all as specified & directed by Engr-in-Charge

M&L PCC 1:4:8 type D-2 ( Using 40 mm graded crushed stone aggregate ) as in foundation, filling and mass concreting etc, complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:4) with old size bricks complete all as per specified & directed by Engr-in-Charge

M&L for 15mm thick cement plaster in cement mortar 1:4, over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Chrage.

M&L PCC 1:2:4 B-1 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.

Supply only integral water proofing compund complete all as specified and directed by Engr-in Charge

M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection even and smooth with using extra cement complete all as specified including pair down of existing plinth protection.

Complete removal of existing treatment including scraping, removing all mud, cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/ Birla white putty to obtain smooth/ even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

Preparation of plastered or unplastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete all as specified and directed.

S&F non asbestos fibre cement board ceiling 6mm, thick in 605x605mm panel (make-everest) designed ceiling conforming to IS-14862 type B category three incl snapgrid frame work, hold fast, suspenders fixed in repair complete all as specified and directed.

S&F Powder coated anodised aluminium door air tight of anodised frame made of size 100mm x 45mm of section thickness- 1.50mm thick with one or more rebates including jointing cleats etc for fixing aluminium anodised door shutter fully paneled (two no of panels on each shutter) with 5.5mm thick tinted glass as in panels shutter rail made of 80mm x 45mm of sheet thickness 1.50mm (top and bottom rails and shutters) single/ double leaf side hung type including necesary jointing cleats /anodised aluminium fillets/ glazing clips with rubber gasket, with aluminium fittings such as aluminium anodised tower bolt 200mm long 03 No for each door, aluminium anodised bow handles 150mm 'D' type 02 nos for each shutter, mortice locks 6lever made harrison one one each door, door shutter mounted on bottom double action floor spring hydralically regulated made up of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing mild steel heavy duty and door shutter top mounted on aluminium alloy pivot- 01 No on each shutter, bottom and floor stoppers, complete all as specified . Note : All fitting shall be of ISI marked except cleats ) sizes of each door shall be as per requirement all as directed and specified including pair down of existing frame and shutter.

S&F Aluminium parition of section (44x44) mm & vertical member (44x44) mm with top, center, bottom with vertical members (44x44) mm with 90cm spacing of each post vertically & horizontaly spacing 75cm, including 5.5mm thick tinted glass & inserts of decorative PVC board at top and bottom respectively all beading rubber gasket & complete builder hardware complete all as specified and directed by Engr-in Charge.

HANS RAJ SHARMA

paras ram pachiala

LUXMI ELECTRONIC WORKS

anil construction co.

RAMAN CONSTRUCTION CO

SHIVAE CONSTRUCTION

SAI RS ENTERPRICSES