Providing 02 No. additional 11 KV MCVCB breakers at 66/11 kV MUSS Challakere in Hiriyuru Operation Division KPTCL Including Supply Of equipments /Materials, Erection (Including Civil Works), Under Partial Turnkey Basis, On Item Wise Tender Basis (Excluding The Major Materials Such As Switchgears Will Be Supplied By KPTCL & Testing & Commissioning Will Be Carried Out By KPTCL) & other allied works.

Providing 02 No. additional 11 KV MCVCB breakers at 66/11 kV MUSS Challakere in Hiriyuru Operation Division KPTCL Including Supply Of equipments /Materials, Erection (Including Civil Works), Under Partial Turnkey Basis, On Item Wise Tender Basis (Excluding The Major Materials Such As Switchgears Will Be Supplied By KPTCL & Testing & Commissioning Will Be Carried Out By KPTCL) & other allied works.

19 core 2.5sq.mm copper control cable.

2 core x 6.0Sq.mm (for ACDB to Breaker, DCDB to Breaker)

9 Mtrs long RCC Pole 145 Kgs Capacity.

H-Frame Set for fixing 11 kV, 200 Amps Single Break GOS (For DP structure for providing New GOS for sectionalisation) MS

DP Set for RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9 Mtr Long, 300Kg WL - MS.

11KV 400A special roaster GOS.

Coyote ACSR Conductor

UG Cable of size 3*240sqmm

Indoor kit as per technical specification

Outdoor kit as per technical specification

PVC pipes 6 collar T joints as per market rate

Checker plate of 6mm guage thickness (100cm*150cm*0.6cm*7.8cm=70200gms) as per market. 02 plates (70200*2=140100gms)

PG Clamps for Rabbit.

Lightning arrestors, 9KV, 5KA class.

Mutli Functional Transducer (MFT) 0.2S class.

Opto coupler, 110 VDC for 110 kV & 66 kV sub-station 220 V DC for 400 kV & 220 kV sub-stations.

Current cable- Copper core ith 2.5 sqmm cross section multistand 7 core for CT termination

Voltage cables-copper core with 2.5 sqmm cross section multistrand 4 core for PT termination

Signal/communication cables -Armoured copper core with 0.5 sqmm cross section multistrand 10 core

Control cables-copper core with 1.5 sqmm cross section multistrand 10 core

Lugs of different sizes as per market rate

11KV In door Switch gear: Erection of breakers, alignment & fixing to the foundation, indoor/outdoor 11 KV switchgear panel/unit including movement from the point of unloading to the point of erecti...

Erection of Annuciation Panel, alignment and fixing properly including movement from the point of unloading to the point of erection.

Laying of control cables from equipments to control panels (including 19core x 2.5 sqmm +2 core x 6.0 sqmm)

Earth work excavation for laying of UG cable in open ground and beneath the road surface in the following strata of soil by mechanical manual means deposition of earth rock on bank with all leads and ...

Laying of 3 x 240 sqmm UG cable

Covering by Bricks

Back filling the cable trench with selected available ridded earth from the trench excavation and consolidating with ramming in successive layers of 15 cm thickness, watering wherever necessary, achie...

Fixing of Heat Shrinkable 3x240 Sqmm potheads

Errection of lightning arrestor and wiring including movement from the point of unloading to the point of errection

Erection of DP structures with all accessories using 9 mtrs long, 145 kgs WL RCC poles

Pole concreting with out Coping CC 1 2 4 (9 Mtr support (650x500x1700 mm)

Erection of 11KV Isolator single break or double break 400A, 25KA

Erection of H-Frame

Grounding of equipment with 50 x 6 mm GI flat & connecting equipment to earthmat/ground pit , Each point of earthing with all formationh works like bending, twisting, drilling of holes & connecting...

Grounding of equipment including the cost of CI pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of GI flat 50 x 6 mm continuously welded alround the pipe using cast iron weldin...

Supplying and providing 450mm dia 450mm height 1.5 to 2 thick hume pipe collar (non pressure type )for earth pits including all lead and lifts etc.

Multi Functional Transducer (MFT)

Configuration of RTU and Engineering along with validation of data at SLDC

Wiring & assisting in testing and Commissioning of 11 KV indoor/outdoor Switch Gear

Testing &Commissioning: wiring: identification of wires, ferruling crimping & termination of wires for annunciation etc testing of CTs,PTs&Breaker for operation. For 11KVsingle panel outdoor type