Repair Maint of internal wiring MCBs DBs with light fitting at SAG Pakur at AF Stn Singarsi under AGE I AF Singarsi

Amount

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC/wooden switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed by Engr-in-Charge.

All as per Item No 2 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed by Engr-in-Charge.

All as per item No 2 here-in-before but for one 5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed by Engr-in-Charge.

All as per Item No 2 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 4 Sqmm copper cable FRLS & 2.5 Sqmm FRLS copper cable for earth continuity wire complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type 5 Amp single pole one way complete all as specified and as directed by Engr-in-Charge.

S&F socket flush type 5 Amp 5 Pin complete all as specified and as directed by Engr-in-Charge.

S&F switch socket combination 5 Pin 5 Amp universal complete all as specified and as directed by Engr-in-Charge.

S&F switch socket combination 5 Pin, 5/15 Amp universal complete all as specified and as directed by Engr-in-Charge.

M&L ceiling rose, 3 phase/PVC/Polycarbonate, isolated bodyall as specified and directed.

M&L call bell, ding dong AC 230 volts, single pole complete all as specified and as directed by Engr-in-Charge.

S&F for sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 4 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed by Engr-in-Charge.(Make:Havells,Hager,Schneider or Legrands).

S&F for sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour ccomplete all as specified and as directed by Engr-in-Charge.(Make:Havells ,Hager,Schineder or Legrands).

S&F for sheet metal enclosures for DB’s double door suitable for mounting of MCCB’s/MCB'S/Isolators, 240 Volt, Vertical TPN DB's 4 way with built in160A rated bus bar and with out MCCB complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed by Engr-in-Charge.(Make: Hager cat No: VYV04DN-P,Siemens or Legrands).

M&L for MCCB, 4P, 415V, overload adjustable 0.63 - 0.8-1 x in short circuit fixed 63 Amps breaking capacity 25KA complete all as specified and as directed by Engr-in-Charge. (Make:Hager ,Schnieder or Legrands).

M & L for MCB, SP, 240V, 40 Amps and ' B ' series breaking capacity 10 KA ISI marked complete all as specified and as directed by Engr-in-Charge.

M & L for MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked complete all as specified and as directed.

M & L for MCB, SPN, 240 V, 40 Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked ,complete all as specified and as directed.

Supply and fix ceiling fan regulator electronic Step type, solid state, 100W, 240 volts, complete all as specified and as directed.

Supply and fixing lamp holder PVC/poly carbonate with back plate suitable for batten fittings complete all as specified and as directed.(Make Penta/anchor/plaza)

S&F metal clad box enclosure with socket plugtop and MCB SP 20 Amp flush mounting enclosure with 2 pin earth plug socket complete all as specified and as directed (Make - Havells Hager/legrand)

Supply and fixing in replacement of existing energy efficient tube light fitting of capacity 20 W suspended type / wall mounted type complete convet to LED fitting and copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed by Engr-in-charge ( Make :Crompton /Bajaj/,Havells)

Supply and Fix exhaust fan heavy duty suitable for 300mm sweep 240 volt AC, 1400 RPM, including Cutting openings, through brick walls for grouting exhaust fan louvers and nuts and bolts, making good plastering and necessary electric connections using 1.0 sqmm twin twisted flexible wire complete all as specified and as directed. Make:- Havells Cat No - Ventill Air DB, equivalent in Bajaj/Orient/USHA

Supply and Fix only ceiling fan heavy duty suitable for 1200mm sweep 240 volt AC, 1400 RPM, necessary electric connections using 1.0 sqmm twin twisted flexible wire complete all as specified and as directed. Make:- Havells Cat No - XP 390, equivalent in Bajaj/Orient/USHA

S&F in repair for Decorative wall mounting SS fitting fixture with opal glass diffuser including suitable for LED retrofit lamp complete all as specified and directed by Engr-in-charge. (Make Haells Cat No:LHJE01106499/Bajaj/CG/Philips)

M&L for replacement of sub main wiring with 2 run of 2.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable FRLS working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including heavy duty rigid non-metallic PVC casing/caping (25mm dia) including size 2.5 sqmm (nominal cross sectional area) PVC insulated un-sheathed single core multi stranded copper conductor cable as earth continuity conductor connected to main switches/DB"S or common earth dully complete all as specified and directed after taking down old sub main wiring complete and making good the disturbed surface complete all as specified and as directed by Engr-in-Charge.( NOTE :- Two runs of 4 Sqmm pvc wire, one run of 2.5 Sqmm pvc wire and one run of pvc casing caping/ PVC conduit will be measured as one unit

Supply and fixing sub main wiring with 2x4.0 sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 4 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping after taking out old un serviceablewring complete and including PVC casing caping complete all as specified and as directed by Engr-in-Charge.Note : (i) Two run of single core cable 4 sq mm and one run earth wire 4sq mm will be measured as one length.(Make: RR,KEI and Finolex for copper Cable and Prestoplast/Plaza for casing/conduit)

Taking down old US security light / gate light / flood light fittings any type / any watt from pole / wall / building etc complete all as specified and as directed by Engr-in-Charge.

Taking out existing defective/unserviceable of Non conventional street light fitting by Supply and fixing 45 W LED in aluminium powder coated PDC housing,toughned glass with integrated lens cover high power LEDs with option of secondary optic with IP 66 protection of Make : Crompton Cat part No: LSTV-45-CDL or equivalent make of Bajaj. / Havells/ Phillips complete all as specified and as directed by Engr-in-Charge.

Supply & fixing in repair PVC insulated & sheathed stranded copper cable 3 core of cross sectional area 1.5 sq mm for proving necessary electrical connection from junction box to light fittings including with suitable size copper lugs complete all as specified and all as specified and as directed by Engr-in-Charge

Supply and fixing in repair 20 mm bore PVC pipe for protection of street light wire from the junction box to street light bracket with suitable flat iron clamp 20mm x 3mm with GI nuts, bolts, washers at three places (for clamp) complete and all as specified and as directed by the Engr-in-Charge

Supply & fixing in repair bracket / arm suitable for street light fittings, made out of 40 mm bore (light grade) GI pipe lengh not exceeding 1.5 mtr long, fixed with 02 sets of flat iron clamp of size 25mm x 5mm, with bolts, nuts and washers of suitable size including applyig two coats of aluminium paint over a coat of red oxide zinc chorme primer complete all as specified and directed by the engineer-in-charge

Material & Labour painting of street light poles 1.0 mtr height silver colour from pole base and remaining 6.5 mtr height, 110 mm dia including all channels, clamps, street light bracket with one coat of red oxide primer and two coat of amuminium painting including writing pole number in white colour over black circular baground complete all as specified and directed by Engr -in-Charge

Supply and Laying only XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric power cable with aluminium conductor, 1100 volt grade of cross sectional area 16 Sqmm of any core for street light connection in trenches/wall/passing through pipe etc with suitable size of aluminium lugs after detecting cable fault complete all as directed by Engr-in-Charge incl taking down old unserviceable cable from any position.

Excavation in trenches not exceeding 1.5 mtr depth width and not exceeding 1.5m depth for laying under ground cable in loose/soft soil complete all as directed by Engr-in-Charge.

M&L for sand cushioning for protection of UG cable with screen wash river sand and punning to proper required cover complete all as specified and as directed by Engr-in-Charge.

M&L for Bircks of sub class 'B' bricks for cable protection in trenches laid dry and flat complete all as specified and as directed by Engr-in-Charge.

Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engr-in-charge.

M/S Subhadip Enterprise

M/S New Builders Corporation

M/S SINGH ENTERPRISE

M/S KUMAR AVINASH

M/S AMARNATH AGARWALLA

M/S ASHA ENTERPRISE

LALAN SHARMA