Replacement of damaged floor tiles with new floor tiles in Flat No. D-II/30, Kaka Nagar, New Delhi

Amount

Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead.15.23.1 For thickness of tiles 10 mm to 25 mm Ref No. 15.23.1 of DSR-2021

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 2mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm sqm DSR-2021 Ref-11.41.2

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours& shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.11.46.2 Size of Tile 600x600 mm DSR-2021 Ref-11.46.2

Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead. Ref. Chapter 15.56 of DSR-2021

12 mm cement plaster of mix : 13.1.1 1:4 (1 cement: 4 fine sand) Ref. 13.1.1 of DSR 2021

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. Ref. 8.31 of DSR 2021

Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed bythe Engineer-in-Charge. 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown,Cat Eye or equivalent. Ref. 11.56.1 of DSR 2021

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge. 8.3.2 Granite work Ref. No. 8.3.2 of DSR -2021

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location inmarble/ Granite/ stone work, including necessary holes for pillar tapsetc. including moulding, rubbing and polishing of cut edges etc. complete. Ref no. 8.5 of DSR-2021

Providing and fixing expandable fasteners of specified size with necessaryplastic sleeves and galvanised M.S. screws including drilling holes inmasonry work /CC/ R.C.C. and making good etc. complete. 8.24.4 50 mm long each Ref no. 8.24.4 of DSR-2021

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick CementMortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement andmatching pigments etc., complete. Ref 11.40 of DSR 2021

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Ref 15.52 of DSR 2021

Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets40 mm flush bend, overflow arrangement with specials of andardmake and mosquito proof coupling of approved municipal signcomplete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Ref 17.3.1 of DSR 2021

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever require:17.7.1 White Vitreous China Wash basin size 630x450 mm witha pair of 15 mm C.P. brass pillar taps Ref.no. 17.7.1 of DSR-2021

Providing and fixing toilet paper holder :17.34.1 C.P. brass Ref.no. 17.34.1 of DSR-2021

Cutting chases in brick masonry walls for following diameter sandcast on/centrifugally cast (spun) iron pipes and making good then same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarsesand) :17.61.2 75 mm dia Ref.no.17.61.2 of DSR-2021

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge. External work Ref.No.18.9.2 & 18.9.3 of DSR-2021

18.9.2 20 mm nominal outer dia Pipes metre

18.9.3 25 mm nominal outer dia Pipes metre

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.22.1 100 mm diameter each Ref No.18.22.1 of DSR-2021

Providing and fixing PTMT pillar cock of approved quality and colour.18.56.1 15 mm nominal bore, 107 mm long, weighing not lessthan 110 gms Ref No.18.56.1 of DSR-2021

Providing and fixing PTMT stop cock of approved quality and colour.18.55.1 15 mm nominal bore, 86 mm long, weighing not lessthan 88 gms Ref No.18.55.1 of DSR-2021

CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking1.1.1 Lime, moorum, building rubbish Ref 1.1.1 of DSR 2021

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Ref 17.16A of DSR 2021

Plastic seat for W.C. - Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.20.1 White solid plastic seat with lid Ref 17.20.1 of DSR 2021

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2.1 Flexible pipe: 32 mm dia Ref 17.28.2.1 of DSR 2021

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodisedaluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Ref 17.33 of DSR 2021

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore Ref 18.52.1 of DSR 2021

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore Ref 18.51.1 of DSR 2021

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore Ref 18.53.1 of DSR 2021

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. Ref 18.53A of DSR 2021

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 18.74.2 15 mm nominal bore with 45 cm length Ref 18.74.2 of DSR 2021

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Ref 17.31 of DSR 2021

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Ref 17.71 of DSR 2021

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Ref 17.72 of DSR 2021

Providing and fixing PTMT grating of approved quality and colour.18.58.1.2 125 mm nominal dia with 25 mm waste hole Ref 18.58.1.2 of DSR 2021

Removing and Re-fixing and cutting of existing door complete in all respect upto the satisfaction of officer in charge- NS ITEM

FIRST EDGE INFRA

BHARTI ENTERPRISES