GURUDWARA SAHIB,SHED NEAR NP-1 IN KOHIMA COY AT AEC TRAINING COLLEGE AND CENTRE, PACHMARHI.

Amount

Surface excavation in soft / loose soil nexc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavating in trenches in Hard/Dense soil n exc 1.5 m wide and n exc 1.5 m depth and getting out for foundation complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone as in foundation /sub base of floor, filling and mass concrete complete all as specified and directed..

Material and labour modular brick work in with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L for 40 mm thick damp proof course in cement cocrete ratio 1:2:4 type B0 to horizantal surface including neccesary formwork complete all as specified and directed.

S&F TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips complete all as specified and directed.

All as per item no 8 above but 5mm dia and over upto and including 10mm in stirrups, spacers and binders complete all as specified and directed.

M&L PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in coping ,benching, haunching including all necessary form work complete all as specified and directed.

M&L for precasted cement concrete slab type B-1, 1:2:4 using 20mm graded aggregates as in manholes cover slab set in cement mortar 1:6 complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in beams, lintels and post holrs between lintels upto 1.5mtr span complete all as specified.

M&L for formwork to the side and soffit of floor or roof beam,girders cantilevers , lintel shelves etc complete all as specified and directed.

M&L 10 mm thick plaster in cm(1:6) finished even &smooth with trowel without using extra cement sahll be provided over all internal surfaces of wall complete all as specified and directed.

M&L external surfaces shall be plastered 15 mm thick in two layers on fair faces of brick work first layer (rendering coat) of plaster shall be 10mm thick in CM (1:6) & second layer (finishing Coat) shall be 5mm thick in cm(1:4) complete all as specified and directed.

M&L 15 mm thick plaster in cm(1:4) finished even &smooth with trowel without using extra cement sahll be provided over all internal surfaces of wall complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M&L for broken stone/boulders for hardcore of gauge nexc 63 mm, deposited, spread and levelled in layers nexc 15 cm thick in two layers watered and rammed to true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone as in sub base of floor complete all as specified and directed.

M&L for 75mm thick PCC type B0, 1 : 2 :4 using ( 20mm graded aggregate ) as in floor finishes surface with using extra cement complete all as specified and directed.

M&L for 75mm thick PCC type C2, 1 :3 :6 using ( 20mm graded aggregate ) as in plinth protection / floor finishes surface with using extra cement complete all as specified and directed.

S&F tubes 15 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

S&F tubes 20 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), area of each tile exc .06Sqm But not exc .11 Sqm etc set in floor and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3 complete all as specified and directed. (Note : screed bed will not be measured paid separately)

S&F rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of 500 Ltr capacity of tank including dismantling of existing water tank of any description, complete all as specfied and directed. .

S&F Ball brass valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe complete all as specfied and directed.

S & F 20 mm dia gun metal or gate valve with ironwheel head screwed both for iron pipe and fixed complete all as specfied and directed. .

S&F Vitreous China wash down water closet pan squatt pattern (orrissa pattern) of size 630x450mm white ( excluding flushing cistern and flush pipe)including trap complete all as specfied and directed. .

Supply only PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia complete all as specified & directed. MAKE: Parryware, Model E8090 SLIMLINE or equivalent model of make as specified in appendix.

Supply only PVC connection 15mm size with PTMT nut of length 300mm complete all as specified & directed.

S&F 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F vitereous china wash basin, white flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, incl 32 mm dia brass CP waste fittings (coupling) including 32 mm waste pipe complete all as specified & directed. .

Supply only 15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm) complete all as specified & directed.

S&F in repair 5mm thick beveled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 4mm thick AC bldg board, complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S& F brass chromium plated tubular towel rail 20mm dia D type, 60 cm long between flanges complete all as specified and directed.

S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed.

S&F 100 mm size butt hinges extruded cold rolled with mild steel pin,bright polished type B11 medium weight, cold rolled complete as all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

S&F for sliding door bolt ofAluminium alloy anodised 250 mm complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F PVC (SWR) grade 'A' pipes 75mm Dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L (SWR) 75mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door complete all as specified and directed.

S &F 75mm bore (SWR) pipe grade 'A' single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend of any radius complete all as specified and directed.

S&F Bib tap 15mm bore fancy type chromium plated , cast copper alloy with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for all forming branch channel (1/2) round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and directed.

Material and labour for applying Three coat of colour wash to newly treated plastered surfaces of wall complete all as specified and directed.

M&L 100 mm bore Salt - glazed stone ware drain pipes, ('A' grade) laid in trenches and jointed complete all as specified and directed.

M&L Plain cement Concrete ( 1:4:8) type D2 bed to 100 mm bore drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested ;in complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F ordinary quality 3 mm sheet glass and glazed with oil putty n exc 0.50 sqm in each pane complete all as specified and directed.

M&L for preparation of newly surface and applying two coat of synthetic enammel paint over a coat of red oxide exceeding 10 cm width or girth complete all as specified and directed.

Excavating in post holes (or similar holes) each n'exc 0.5 Cum, getting out in soft/ loose soil and removing surplus soil to a distance n exc 50m and making good complete all as specified and directed.

S&F mild steel rolled section conforming to Fe-290 (Gde E-165), as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

M & L for point wiring for one light/ fan point controlled by one switch with 105 sqmm ( norminal area) PVC insulated. Unsheathed multi stand copper conducter cable FR-LSH in and including contducted PVC conduit 20 mm dia heavy duty ISI marked. Steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor able FR-LSH conected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1.3) complete all as specified and directed by Engineer-in-charge (Note- Switches, sockets etc shall be measured and paid for separately under appropriate iyems of Sch 'A').

Description same as per item no. 69.00 but For one socket point 5 pin ,5 Amp on the same board with other switches.

Description same as per item no. 69.00 but one socket point 5 Amps on the indipendent board.

e) For one socket point wiring 15 Amps with using 2.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable 1100 volts grade confirming to IS - 694 drawn into and including (partially concealed on wall and surface on ceiling) PVC conduit of suitable size with all accessories fixed on wall / ceiling and terminating in and including concealed MS box suitable size duly painted and covered with 2.8mm thick hylum sheet incl 1.5 Sqmm PVC insulated unsheathed single core multistrainded copper cunductor cable 1100 volts grade for earth continuity conductor and connecting to common earth dolly complete all as specified and as directed.

Supply and fixing semi modular switch piano flush type single pole one way 6 Amps 240 volts complete all as specified and as directed.

S & F semi modular one switch & one socket outlet 5 Pin 5 Amp 230 volts AC ncluding decorative frame cover etc complete all as specified Note:- Switch and socket shall be of same make switch and socket indo Asian/Havells/Legrand/Anchor.

Suply and fixing ceiling rose, 3 terminal , PVC polycorbonate, isolated body complete all as specified and as directed.

Supply and fixing Lamp holder PVC / Plycarbonate type with back plate suitable for battan / angular fittings complete all as specified and as directed.

S & F semi modular one switch and one socket outlet multiprurpose 3 Pin 5 Amp and 6 Pin 15 amp 230 Volts AC ncluding decorative frame cover etc complete all as specifiedNote Switch and socket shall be of same make switch and socket - Make Indo Asian/Havells/Legrand /Anchor.

S & F sub main wiring with two single core cable PVC insulated unsheathed of copper multi strandard conductor FR-LSH cable of size 6 sqmm, 1100 volts grade drawing through and including concealed conduit 20 mm dia medium duty including acessories such as tee,bend.Elbow etc. ISI marked wth and including PVC insulated 6 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall existing surface, etc complete all as specified and directed by Engineer-in-charge includung taking down old unserviceable wiring ( Note:- Three lengths of 6 Sqmm cable will be measured as one length).

S/F wall mounted LED fiting IX18/20/22 watt, 6000K, 4ft complete with following Accessories:-(i)LED batten suitable for fiting of LED tube rod single side/double side connection with G13 Lamp Holders(ii)LED tube rod 18/20/22 W single side/Double side connection to be fixed in above fiting Note:- The above item should be enviroment friendly, energy efficient complete with all light fitings connection complete all as specified and directed.

S & F mini mirror LED light indoor domestic mirror light luminarire IX5/7/9 Watt inculding connections with with twin core wire of suitable size all as specified and directed.make Cropton cat part no LCL-07-CDL or equivalent in Bajaj/Philips/Havells.

S & F exhaust fans AC single phase 230/240 V. 1400 rqm of size 300 mm sweep with louvte Each and electrical connection providing twin core round copper conductor cable of suitable size complete all as specified and directed.

Dev Enterprises

MODI CORPORATION

DEEPAK JAISWAL