ADDN/ALTN TO OTM ACCN BLDG NO E-123 AND E-127 AT ARTY CENTRE HYD AND PROVN OF TOILET BLOCK FOR NCOS/OR UNDER GE GOLCONDA

Amount

Taking down existing felt, plaster and preparing the surface of roof by cleaning of foreign materials down with water and removing debrish from site complete all as specified and directed.

M & L for roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc.and brushing neat cement slurry with 3 Kg., of cement per square metre complete all as specified and directed.

M&L for providing cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) as in padding and benching & filletting with IWPC complete all as specified and directed.

M&L screed bed or bedding layer 10 mm thick CM 1:4 for laying floor finishes finished even and smooth without using extra cement with IWPC as in roof slabs complete all as specified and directed.

M & L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltrs/sqm by forced application and applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm over finished with one coat of aluminium paint @ 100 ml/sqm, 10 cm overlap fused uniformly by LPG torch flame, all as specified and directed” Note :-1) Quoted Rate includes taking down and refixing of earth strips or any other and fixed in the same position. 2) Padding concrete shall be measured and paid separately.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and removing debrish from site complete all as specified and directed

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed.

Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor) beams, staircase, landing, chajjas and similar suspended work and removing debrish from site complete all as specified and directed

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), etc for rough finished surfaces of flat concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Item No. 12 above but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders complete all as specified and directed.

All as per Item No. 12 above but 6 to 8mm dia

Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed.

M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (IWPC measured and paid separately) complete all as specified and directed.

Supply only integral water proofing compound (BIS marked)

M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete and all as specified and directed.

M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 3mm thick wall care putty on wall and preperation of surface complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed.

M&L for Rendering 5mm thick in CM (1:3) as in ceilings, concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new ceiling surfaces and applying three coat of white wash, complete all as specified and directed.

M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment and applying two oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors,plinth Protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in sunken floors & floor etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) as in sub base of floors laid in alternative bays including necessary form work complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc., laid over and including 15mm thick cement screed bed or bedding layer in CM (1:6), tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, compelte all as specified and directed.

M & L for glazed ceramic tiles in vetical surfaces, size of tile 300mmx450mmx7mm thick laid over and including 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed.

M&L Vitrified Ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm as in floors etc., and laid over and including cement screed bed or bedding layout in CM (1:6), 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm as in skirting / dados etc laid over and including 10mm thick back coat in CM(1:4) and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed.

M&L for Machine cut kota stone slab flooring 20 -25mm thick over cement screed base laid and cement screed in CM 1:6, 15mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 20 -25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement complete all as specified and directed.

M&L chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

M&L for Providing reinforced cement concrete Type B1 1:2:4 (20mm graded agg) as in lintels upto 1.5m clear span, shelvs and other similar bands including formwork etc complete all as specified and directed.

Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) and removing complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed.

S & F 35 mm thick FACTORY MADE plain, framed, panelled shutters ( two panels), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood gauzed and skeleton shutters for doors open rebated and prepared to receive glass, gauge etc., divided into square with plain chamfered or rounded mitered and rebated sash bars, any number, edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters all as specified in SSR Part-I Section 8 clause 8.20 (a) complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with wooden beeds complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading, and tinned tack or galvanised wire staples or necessary nut & bolt etc complete all as specified and directed.

M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.

M & L for preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and as directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F 150 mm length of extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F for Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300 mm complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F 150 mm long floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc. complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification& drawing complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed to PVC Doors complete all as specified and as directed.

S&F 125 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 30 mm thick 2nd class hard wood factory made glazed and skeleton shutter divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventilators, etc. provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as specified and directed.

S & F 75mm MS Butt hinges medium weight cold rolled complete all as directed.

S & F 100mm aluminium anodised, barrel tower bolts of extruded section length of bolt etc complete all as specified and directed.

S & F 100mm extruded aluminium alloy handles, fabricated type, anodised, Size of handle etc complete all as specified and directed.

S & F for mild steel wire type I, Gate and shutter, hooks and eyes 125 mm complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

S & F 4mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

Taking down 15mm bore steel tubing and connections in any position, complete all as specified and directed.

Taking down 20mm bore steel tubing and connections in any position, complete all as specified and directed.

S&F galvanized steel water tubing medium grade of 15mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions complete all as specified and directed.

S&F galvanized steel water tubing medium grade of 20mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks Triple layered (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position including dismantling old tank complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks Triple layered (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position complete all as specified and directed.

S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed.

S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down existing pipe complete all as specified and directed.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed.

S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed.

S&F PVC (SWR) bends with access door any radious 75 mm dia complete all specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 2nd Class hardwood plain fillets, square or triangular in section, clean swan, secured with nails or brads, croos sectional area exc 13 Sqcm but Not Exc 25 Sqcm complete all as specified and directed.

M&L for 40 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for forming 12 mm thick expansion joints for 40 mm concrete slab thickness filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound grade A.

M&L for Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/Dense soil complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified.

Spreading and levelling in layers n exc 25cm thick including well ramming and watering complete all as specified and as directed.

M&L for 25 mm thick Damp proof course in cement concrete 1:2:4 Type B-0 (Using 12.5mm crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for RCC type B1 1:2:4 (20mm graded agg ) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and directed

M&L for RCC type B1 1:2:4 (20mm graded agg ) as in lintel beams and shelves, chajjas and the like complete all as specified and directed

Formwork to ,rough finished surfaces of flat concrete, soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as specified and directed

Formwork to,rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed

Formwork to,rough finished surfaces of flat concrete, chullah hoods, chajjas,troughs and similar items including edges,etc complete all as specified and directed

S&F for steel ventilator with top hung double shutter including hinges, steel peg stay complete all as specified and directed

S&F Vitreous China squatting pan, "Orissa" pattern size 580 X 440 mm white, with intgrel footrest (excluding flushing cistern & flush pipe) including 110mm dia PVC SWR 'P' or 'S' trap including provision of cement concrete complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level, white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.

S&F Vitreous China Urinal bowl flat back of size 465 x 355 x 265mm (minimum), white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F 32mm dia UPVC pipes of pressure rating 10kgf/Sq cm laid for wash hand basin/Urinal waste pipe complete all as specified and as directed.

S&F vitreous china wash basin, white, flat back size 550 x 400mm including one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F 32mm waste fitting, brass chromium plated for glazing ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F for PTMT towel rail 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Min. weight 190 Gms) complete all as specified and as directed.

S & F for 15 mm dia Pillar taps long body fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F for 15 mm dia fancy type Stop valves/angle cock cast copper alloy, chromium plated screwed down, high pressure, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F for 15 mm bore Bib taps, cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F for 15mm dia of brass chromium plated shower rose 125mm size any colour for fixing with 15mm bore pipe complete all as specified and directed.

S&F PVC connection 15mm dia, 600mm long with PTMT nuts complete all as specified and as directed.

S& F for CP Soap dish, vitrious china white, approximate size 160 x160 x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F for PVC ball valve 20 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed (minimum weight 20 mm- 210 gms ) complete all as specified and directed.

S&F for 16 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specifed and directed.

S&F for 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specifed and directed.

S&F for CPVC ball valves with lever, screwed both ends to pipes of 20mm bore fixed complete all as specifed and directed.

S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches complete all as specified and directed.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all specified and directed.

S&F PVC (SWR) bends with access door any radious 75 mm dia complete all specified and directed.

S&F for 110mm bore PVC( SWR ) junction (single-T) equal or unequal with access door complete all as specifed and directed.

S&F for 75mm bore PVC( SWR ) junction (single-T) equal or unequal with access door complete all as specifed and directed.

S & F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed.

M & L SGSW gully traps square or rounded mouthed type P, size 150 x 150 mm fixed in cement concrete complete all specified and directed.

Cutting into existing manholes for connecting new drains of internal dia of pipe 100mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all specified and directed.

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Cutting existing steel tubing of size 40mm dia for alterations or additions (Each cut measured)

Screwing existing steel tubing of size 40mm dia for alterations or additions or lengthening on pipe to form connector

Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. complete all as specified and directed.

Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated sheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated sheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed

All as per item No.140 but One 3 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed.

All as per item No.140 but One 3 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed.

All as per item No.140 but for One 3 pin 15 / 16 Amps switch socket outlet point on independent board with 4.0 sqmm PVC (FRLS) insulated sheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated sheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed at site.

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5Amps complete all as specified and directed at site.

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 & 15 Amps complete all as specified and directed at site.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site.

M&L Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed at site.

S&F for 9 W LED bulb of base B-22 with colur temperature 6500K complete all as specified and as directed.

S&F in repairs factory made prewired SPN 4 ways distribution board (with cable end box) in sheet steel enclouser vertical double door with 200 Amps rated bus-bar,415V suitable for housing SPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, double door, IP-43 complete all as specified and as directed.

All as per item No-152 above but TPN 4 way double door complete all as specified and as directed.

All as per item No-152 above but SPN 12 way double door complete all as specified and as directed.

S&F for MCB, Four pole/TPN, 240 volts, 40 to 100 Amps 10 KA C curve complete all as specified and as directed.

S&F MCB, SPN, 240 volts, C Curve , 6-32 Amps 10 KA complete all as specified and as directed.

S&F MCB, SP, 240 volts, 6 to 32 Amps 10 KA C Curve complete all as specified and as directed.

S&F for LED light fitting 1x 20 W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F for 35W LED street light fitting 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F Exhaust fan, steel body, AC single phase, 230V of size 300mm sweep with blades and frame and louvers complete all as specified and as directed.

S&F for LED light fittings, 1x10 watts bulk head luminaires, IP66 complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose complete all as specified and as directed.

S&F for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specifed and directed

Supply and fix storage type water heater electric type, steel body with copper inner tank and heating element upto 2 KW capacity 25 Ltrs BEE 5 star rated and indicating temparature and working pressure at 8 bar complete with all accessories such as safety valve, thermostate, NRV, connection piece, suitable number fasteners and grouted on stone wall and making good to the disturbed surfaces complete all as specified and directed.

M&L Submain wiring with 2 runs of 4.00 Sqmm single core, PVC unsheathed 1100 Volts grade, multistranded, flexible copper conductor cable (FRLS) drawn through newly laid PVC casing capping/conduit, fixed on walls/ceiling with all fittings suitable including green colour of size 4.0 Sqmm PVC insulated, unsheathed, multitranded, copper conductor single core cable as earth lead and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed. Note: (i) 2 runs of cable and one run of earth wire shall be measured as one run length. (ii) Earth wire shall run inside the same casing capping/conduit, (iii) Cost of PVC casing capping/conduit deemed to be included in the quoted rate.

M&L Submain wiring with 2 runs of 4.00 Sqmm single core, PVC unsheathed 1100 Volts grade, multistranded, flexible copper conductor cable (FRLS) drawn through newly laid PVC casing capping/conduit, fixed on walls/ceiling with all fittings suitable including green colour of size 4.0 Sqmm PVC insulated, unsheathed, multitranded, copper conductor single core cable as earth lead and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed. Note: (i) 4 runs of cable and one run of earth wire shall be measured as one run length. (ii) Earth wire shall run inside the same casing capping/conduit, (iii) Cost of PVC casing capping/conduit deemed to be included in the quoted rate.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core complete all as specified and directed.

Supply and spread approved dry river sand for cushioning of cable laid in trenches including watering and consolidation, complete all as specified and directed. Note:- Punned thickness of sand cushioning shall only measured for payment purpose.

M&L for brick, sub class 'B', old size, laid in trenches as cable protection covers, complete all as specified and directed at site.

harshraj and co

Sri Lakshmi Enterprises

RAFEEQ AND CO

M/S Veerabhadra Constructions