ADDN/ ALTN AND DIVERSION OF HT UG 3 CORE X 120 SQMM FROM EKAM TO MISSERMINE SUB STATION AT NAD AND PROVISION OF CHAIN LINK FENCING TO ARIAL PARK AT NRS THANE UNDER GE(NW) MANKHURD

Amount

Taking up/down under ground cable 11000 Volt grade of size 120 Sqmm, 3 core from trenches, ducts, floor, pipes and removing materials from site of work complete all as directed by Engineer-in- Charge.(Note: Excavation and earth work shall be measured separately)

Supply , laying & testing HT UG cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty ) with stranded aluminium conductor 11000 volts (Earthed), grade of size 120 Sqmm 3 core all as specified and directed. Make: Polycab/ KEI/ Grandley or equivelent

Supply and fix cable jointing kit for 11 KV grade for indoor termination end Cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 120 Sqmm all as specified and directed. Make: 3M/ M Seal/ Raychem or equivelent

Supply, fixing and testing cold shrinkable type, straight through cable jointing kit, outdoor type suitable for XLPE insulated cable, 120 Sqmm size 3 core, 11 KV, as fixed in repairs complete all as specified and directed. Make: 3M/ M Seal/ Raychem or equivelent

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and directed

Excavation in trenches in hard dense soil/ road cutting/ PCC not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide and getting out complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in harde/dense soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in harde/dense soil

Supply and laying un-reinforced precast conctere cable cover,class HVP, type 2 with peak size of 450 X 180 X 40 mm. Make: Mehtab tiles/ National tiles or equivelent

M & L for dry screened river bed sand cushioning 8cm before laying the cable and 15cm after laying the cable and further hand punned to form a uniform all as directed by Engr-in-Charge.

Returning and filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above Cum the starting point in rocks.

M & L for PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete as specified and directed

S&F of HDPE type pipe, PN-10, 100 mm dia for laying in ground, road crossing etc for cable protection including necessary fittings for wall and ducting with required clamps and supports, etc. all as directed by Engineer in Charge. Note: Required Clamps and supports (PCC) shall be fixed on wall with distance 1.00 RM as directed by Engr- in- Charge. Make: FINOLEX/ TIRUPATI/ SUPREME/ DUPLON (RELIANCE)

S & F cable route indicator made out of 50x50x6mm angle iron, 150mm long embedded in PCC block of suitable size with the letter 'HT CABLE' suitable inscribed on Cl circular plate plate 8mm thick, 100mm dia complete as specified and directed. Make: Best available in market.

Renewal of broken/wornout earth pit including M & L for earthing chemical with copper plated 50 mm dia pipe 3 mtr long (100 microns) including Electrodite 50 Kg buried directly in ground including earth bore hole work (earth bore not less than 3 Mtr deep below normal ground level and connected to copper earth strip of size 20×3 mm by means of copper nuts bolts with washers and connected as per following specifications complete all as directed by Engineer-in-Charge. (a) Product Model: ASEEL 19 CP, 3 meter long (Copper Plated) – 100 microns . Fast Electrode, Model FE 80 mm 3 mtr (Pure Copper Single Pipe), Outer Dia is 80 mm with a wall thickness of 2 mm, Inner Dia is 26 mm with a wall thickness of 2.6 mm, Overall Length is 3000 mm, External Corrosion Protection: Copper Plated (100+ microns), Internal Corrosion Protection: In addition to Copper Plated (100+ microns), a ground breaking corrosion resistant Crystalline Conductive Compound is filled and compacted in the cavity within the pipes to enhance the electrodes performance. Conforms to IS: 3043 - 1987 i.e., Code Of Practice For Earthing (+ 10%) variations in dimensions applicable. (b) Electrodite backfill: Fast Electrode Earth Enhancement Compound, Manufactured using Eco - Friendly minerals, Blended homogeneously with conductive carbon(s), Resistivity: < 5 ohm-metre (In ideal moist conditions); > 5 ohm-metre (Dry Conditions), Ph Value: 7.0 - 8.5, High water retention capacity, Hygroscopic, Ionic & Electronic conduction, Swells when it comes in contact with water thereby engaging constant contact between the electrode surface & soil which is a crucial aspect in the performance of an earthing system. Packing Size : 2 Bags of 25 kilograms, Recommended for normal soil conditions. Confirms to IS : 3043 – 1987. (c) Installation of earthing with bore well machine complete for bore exceeding upto 4.5 meter below ground level complete all as specified and directed by Engr-in-Charge.

S&F HT rubber insulsted mat suitable for 11KV panel 3 mm thickness Claas'B' having fire retardant, insulation water resistance of size 1m X 10m X 3mm confirming ISI 15652:2006 Make: Best available in market

S&F Self-amalgamating high voltage electrical insulation tape suitable for 11 KV AC supply of size not less than 50 mm wide x 0.8mm thick x10 Mtrs (EPR Rubber) having property of Moisture seal for all water- proofing needs for insulating protection of bus bars, cable lugs, terminations, transformers other power distribution equipment also incl corona ozone resistance and UV resistance confirming IS 7809:1 (1975) Make: 3M/ Scapa or equivalent

S&F CTC solution for for removing carbon on electrical equiments, each bottle not less than 400 ml solution Make: Best available in market

Supply and install in repairs AFO (Auto fire off) fire extinguisher ball 150 mm dia (standard orange) with stand complete all as specified and directed. Make Best available in market

S&F 1st Aid box with including all essential 1st aid medicine (minimum 32 medicine) of size 5D x 20W x 10H Centimeters, 4 Partition for medicines organize with lock Inlcuding feature of wall mounting box made from galvanize Metal with 7 Way Processed Powder Coating complete all as specified and directed.

S&F high power torch strong beam suitable for long range, single high power LED with 2 mode light switch having USB type charging port. Operating on 3.7 V DC, battery supply >4000 mAh Make: Phillips/ Eveready/ or equivelent to Phillips

M & L Cement concrete 1:4:8 Type D2 (40mm graded aggregate) in foundations, filling and mass concrete.

M & L for hard core of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 10 cm thick watered and rammed to a true surface complete all as specified.

M&L 100MM thick cement concrete type B2 1:2:4 (40 mm graded aggregate) finished even and smooth without using extra cement complete all as specified

M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:4) mortar, complete.

M&L rendering 15mm thick on fair faces of stone masonry or concrete surface in CM 1:4 is to be finished even and smooth(without using extra lime or cement)

M & L for cement concrete 1:2:4 type B-1, using 20mm grade stone aggregate as in coping including necessary formwork complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc complete all as specified.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M&L two coat of synthetic enamel paint over red oxide over preparation of new steel surface complete all as specified.

M&L for PVC coated galvanised chain link fencing of wire mesh size 50 mm x 50 mm x 3 mm weighing not less than 2.18 kg/sqm (weight inclusive of PVC coat) and PVC coated line wire etc including fixing line wire to angle iron posts / rails straining bolts with provision of binding wire etc complete all as specified

Preparation of new plastered surfaces of walls and apply two coats of Cement base paint over a coat of white wash

S&F steel screws bolts (Machine made) made hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with one hexagonal or square nut , exc 5 cm but n exc 10 cm long dia of shank 5 to 10 mm complete all as specified and directed. Note : A sum of Rs 33,750.00 towards sch of credit shall be deducted to arrive the contract sum

M/s Mukesh Engineers (BID ID -3104152)

OM POWER SYSTEMS (BID ID -3104004)

Chaudhary Enterprises (BID ID -3117999)

Shree Ayyappa Engineering (BID ID -3104805)

AGRAWAL ASSOCIATES (BID ID -3102727)