Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹39.8 L+₹1.6 L (4.06%)Rejected-Finance RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹40.9 L+₹2.6 L (6.77%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹40.9 L+₹2.6 L (6.86%)Rejected-Finance WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L4₹43.0 L+₹4.7 L (12.4%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L4 | Rejected-Finance Not Being Lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
13 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE B/R-II AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10
2022_MES_563707_1
GE/C-66/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹92,000
Yes
23 Dec 2022
17 Nov 2022
15 Dec 2022
17 Nov 2022
13 Dec 2022
24 Nov 2022
17 Nov 2022 - 24 Nov 2022
Amount
Dismantling of Brick tiles or terracing tiles, single layer on roofs, kerbs, aprons, etc. (each layer) complete all as specified and directed.
Demolition Mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and disposal out of MoD Land complete all as specified and directed.
M&L Cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregates) as in roof levelling complete all as specified and directed.
M&L Applying a coat of bituminius primer confirming to IS 3384 @ 0.5 ltr/sqm on prepared surface of plaster after drying of primer and applying APP based Polymeric membrane minimum weighting 3 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gram/sqm) and sealing joints by torch application over the APP memberane by applying semi hot blown bitumin 85/25 @ 0.5 Kg/Sqm and dusting over the bitumin coat complete all as specified and directed.
M & L for supreme quality Heat Resistant Terrace Tiles of size 250x250x 20mm thick ,tiles are specially developed to integrate seamlessly with the concrete roof to provide an efficient solution for hot climatic conditions for residential accommodation. The eco efficient tiles are made from premium grade materials under strict quality supervision. Further, these easy to install tiles are suitable for retrofitting projects over 15mm thick screed in CM 1:4 mixed with water proofing compound as per manufacturer instruction complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), laid bedded and pointed in any mortar and removal and removing old tiles from premises complete all as specified and directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying tiles all as specified and directed.
S&F for digital glossy finish vitrified tiles 10 mm thick of Dark shade (Square/rectangular) polished area of each tile not exceeding 0. 36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
All as per item No 8 hereinbefore but in vertical surfaces such as skirtings, dados and risers to steps etc
M&L for 10mm thick screed plaster on fair faces of brick work/concrete in CM 1:4 to receive tiles as in dado complete all as specified and directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 Complete all as specified and directed.
M&L for Coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each(without taking off shutters from the frames) all as specified and directed.
Taking down Chowkats or frames not exceeding 1.5 Sqm each(without taking off shutters from the frames) all as specified and directed.
Taking down shutters of any descrition exc1.0 Sqm but not exceeding 2.0 Sqm eachall as specified and directed.
S&F Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardantgrade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all as specified and directed.
M&L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed.
S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, paneled shutter with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.
M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and one no 300 mm long Aluminum Sliding door bolts, wire mesh / glass and two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.
Providing and fixing factory made UPVC any colour sliding window. Three track of area n exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber, frame ((88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 + 0.2mm thick galvanized steel frame (30mm x 18) 02Nos, sliding sash(30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in reqd. Profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware ( Touch lock of zinc alloyed (any colur powder coated) , steel roller system, including 5mm thick toughened glass with single glazing bead and weather seal, stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories). Note:- Net opening will be measured for payment purpose.
S &F Stainless steel grill AISI 304 grade using 10mm thick size hollow square bar (100mm c/c) weight not less 0.62 Kg/mt including necessary frame and accessories for window and ventilator grill complete all as specified and directed.
S&F for Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality (Make-VISTA) (3mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, two number of latto on both end s of curtain rods, complete all as specified and directed by Engr-in-Charge.
Demolition of Brickwork or stone/ boulder masonry but built in cement mortar in any description and position complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks of old size straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.
Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc.
M&L for rendering 15 mm in cement mortar 1:6 thick on fair faces of brick work or concrete surfaces complete all as specified and directed.
Rendering 15mm thick in two layers considering of 5mm thick in cm 1:4 over 10mm thick in CM 1:4 on fair faces of brickworks including finished even and fair.
M&L for Complete removal of existing treatment on walls and smoothen the surfaces with a coat of 2mm thick wall care putty and applying two coats distemper oil emulsion over a coat of alkaliresistant priming all as specified and directed.
M&L for preparing Newly plastered surfaces and apply a coat of 2mm thick wall care putty for making smooth surface and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls.
M&L for perparation of Newly plastered or unplastered wall surface and applying two coats of weather coat/apex paint on walls/ceilings complete all as specified and directed.
M&L for Complete removal of existing treatment and applying two coats of weather coat/apex paint over a coat of primer on walls/ceilings complete all as specified and directed.
M&L for Complete removal of existing treatment of plastered or unplastered ceiling surface and applying two coats of distemper oil emulsion complete all as specified and directed.
M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as specified and directed.
PVC valveless, syphonic action type, flushing cistern, (10ltrs capacity) low level, white, with inlet, ball valve, float and handle including brackets.
Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.
S & F in repairs vitreous china coloured Wash hand basin of size 580 x 440 x 290 mm with full pedestal of height 800mm complete including 32mm dia CP Waste, 02 Nos of CP Connection 450mm long and PVC down pipe of 750mm long , including provision of pair of mild steel iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls and making good complete all as specified and directed.
S&F in repair CP 15mm dia for sink /wall mixer cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe & fixed.
S&F in repair 15mm bore CP Angle/stop valves fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair CP 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed Complete all as specified and directed.
S&F for PVC connections 15mm size with PTMT nuts of length 600mm long complete all as specified and directed.
S&F for in repair gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F for in repair ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.
M&L for in repair 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and fixed.
S&F in repair 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.
S&F for PVC waste pipe complete all as specified and directed.
S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F for 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
M&L for PVC (SWR) floor /Nahani trap plain with including 63mm dia grating including jointing with solvent cement in repair complete all as specified and directed.
S&F in repair aluminium anodised tubular rail 20mm dia D type 60cm long between flanges including per pair brackets for each towel rail.
S&F in repair aluminium hat pegs solid body 125mm to 175mm long.
Taking up or down 20mm GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 15mm bore GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F for 20mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed by Enge-inCharge.
S&F for 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed by Enge-inCharge.
M&L for Cutting chases on brick or concrete surface and making good, cutting not exc 10 cm girt for concealed water tubing and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc.
S&F for Rotational moulded polyethylene water storage tank capacity 1000ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing to store, complete all as specified and directed by Engr-in-Charge.
S & F in repairs vitreous china coloured European type WC of P or S trap , floor mounted (One piece EWCs with duroplast slim seat cover and twin flush fittings) including connection to drain and fixing bolts, Plastic water closet seat cover complete all as specified and directed. NOTE : The rate quoted by the contractor for the above item is inclusive of all fittings and fixture and for entire completion of work.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.
M&L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish including GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre.Hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flate 40X30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.
S&F false ceiling using plain galvanised steel ceiling system consisting of 600X600 mm lay in tiles of pre coated galvanised steel sheet 0.5mm thick in white or coloured to be laid on grid system with 15mm wide T section of size 600 X 45 X 15 mm flanges having rotary stiching on the main runner. The main runner spaced 600 mm centre to centre flush fitting 600 mm long cross tees to be interlocked between runner at 600 mm centre to from 600X600 mm module perimeter trim to be wall angle of size 3000 X 45 X 15 mm secured to wall and including suspension system as per manufacturer instruction aomplete all as specified and directed. Make- Armstrong or equivalent.
S&F Framed bracket of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary,gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and the sheet should be embedded in to the wall to a depth of 25mm and the surfaces to be plastered and made good complete all as specified and directed.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L Hardcore of broken stone of gauge n. exc 63mm deposited, spread and levelled in layers not exc 100 mm thick watered and rammed to a true surface complete all as specified and directed.
M&L 75mm thick PCC (1:4:8) Type D2 (using 40mm graded crushed stone aggregate) as in sub floor complete all as specified and directed.
Sand filling under floors or in foundations including watering and consolidations complete all as specified and directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.
M&L for 18-19mm thick PVC moulded solid board both side prelaminated for cupboard etc with shutters and shelf full size fitted under or including provision for fixing arrangements, fittings/fixtures like magnetic catcher, hinges etc complete all as specified and directed. (Note:- The rate quoted by the contractor is inclusive of all the fittings and fixtures for the entire completion of work. Nothing extra shall be paid on this account).
S&F stainless steel three drawer set of the kitchen cabinet system of overall size 500X600X800mm with the following specified Stainless steel 304 bracket (i) Raw material:- Stainless steel AISI 304 grade, dia 10mmX19 SWG (ii) The bracket base stainless steel AISI 304 grade dia 3mm (iii) Support bar of stainless steel AISI 304 grade dia 5mm (iv) Finish: Electro polished or buff (v) The three drawer set shall consist of the following units:- (a) Cutlery unit: Perforated curtlery unit made out of perforated stainless steel 304 grade with perforated channel with provision of size 435x550x100mm and is fitted with telescopic channel. (b) Cups and saucer unit made out of stainless steel 304 grade of size 435x550x100mm and fitted with telescopic channel to carcass all as specified. (c) Plate rack: plate rack made out of stainless steel 304 grade of size 435x550x100mm and fitted with telescopic channel all as specified.
S&F stainless steel three drawer set for the kitchen cabinet system of overall size 500x600x800mm with the following specifications Stainless steel 304 grade bracket (i) Raw material:- Stainless steel AISI 304 grade, dia 10mmx19 SWG (ii) The bracket base stainless steel AISI 304 grade dia 3mm (iii) Support bar of stainless steel AISI 304 grade dia 5mm (iv) Finish: Electro polished or buff (v) The three drawer set shall consist of the following units (a) Normal drawer unit top:- Normal drawer unit made out of stainless steel 304 grade of size 435x550x100mm and is fitted with telescopic channel as shown in the sketch. (b) Normal drawer unit bottom:- Normal drawer unit made out of stainless steel 304 grade of size 435x550x100mm and is fitted with telescopic channel as shown in the sketch (c) Plate rack: plate rack made out of stainless steel 304 grade of size 435x550x100mm and is fitted with telescopic channel all as shown in the sketch.
S&F stainless steel one tier pullout set out for kitchen cabinet system of over all size 800x600x800mm with the following specifications (i) Stainless steel AISI 304 grade, dia 12mmx19SWG (ii) The bracket base stainless steel AISI 304 grade dia 3mm (iii) Support bar of stainless steel AISI 304 grade dia 5mm (iv) Finish: Electro polished or buff (v) Heavy duty storage drawer unit bottom made out of stainless steel 304 grade of size 735x550x100mm and is fitted with telescopic channel as shown in the sketch
S&F stainless steel one tier spice rack for the kitchen cabinet system of overall size 200x600x800mm including SS 304 grade tray, PWCT carcass with the following specifications. Stainless steel 304 grade for tray (i) Raw material:- Stainless steel AISI 304 grade, dia 10mmX19 SWG (ii) The bracket base stainless steel AISI 304 grade dia 3mm (iii) Support bar of stainless steel AISI 304 grade dia 5mm (iv) Finish: Electro polished or buff Spice Rack should consist of stainless steel 304 grade of size 130x550x100mm and is fitted with telescopic channel
S&F stainless steel One tier soup rack for the kitchen cabinet system of over all size 200x600x800mm including SS 304 grade tray, PWCT carcass with the following specifications Stainless steel 304 grade for tray (i) Raw material:- Stainless steel AISI 304 grade, dia 10mmX19 SWG (ii) The bracket base stainless steel AISI 304 grade dia 3mm (iii) Support bar of stainless steel AISI 304 grade dia 5mm (iv) Finish: Electro polished or buff Soup rack should consist of 1 racks of stainless steel 304 grade of size 130x550x100mm and is fitted with telescopic channel as specified.
S&F Stainless steel 304 grade dustbin stand for the kitchen cabinet system of 8 litres capacity with PVC lid and bucket.
Supply only 550mm telescopic channel for fixing cabinet dooors in kitchen cabinet system which allows the cabinet door to close smoothly with minimum weight bearing capacity of 40kg.
S&F Auto closing hinges for fixing cabinet doors in kitchen cabinet system with self closing mechanism which allows the cabinet door to close smoothly.
S&F Fancy type 100mm long SS handle with extruded section fixing with SS screw complete all as spd
M&L for Surface dressing n exc 15 cm deep and site clearance complete all as specified and directed.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry laid over 15mm thick screed bed in cm 1:6 as in floors with no pigment complete all as specified and directed.
M & L for painting new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of red oxide complete all as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as directed.
S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates
Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.
Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.
Taking down old submain wiring of any size and make from the site and making good surface complete all as specified.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified.
One light /Ceiling fan/exhaust fan point controlled by one switch.
One light /Ceiling fan/exhaust fan point controlled by two way switch.
One bell point controlled by one switch.
One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.
One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board.
M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4 sqmm FRLS 1100 Volts in New PVC concealed conduit in new M S steel terminal boxes modular including one run of using 4 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified.
M&L switch Modular type 6 Amps one way 230V AC complete all as specified.
M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified.
M&L switch Modular type 16 Amps one way 230V AC complete all as specified.
M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified.
Supply & Fix Modular five stepped type electronic fan regulator 2 module 230V AC complete all as specified.
M&L switch Modular type 6 Amps two way 230V AC complete all as specified.
M&L bell push switch Modular type 6 Amps one way 230V AC complete all as specified.
M&L ceiling rose 3 phase PVC polycorbonate,isolated body.
M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 2.5 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed.
M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc 4 mm dia galvanised or steel wire complete all as specified.
Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
M&L MCB SPN 63 Amp "C " curve.
M&L MCB SP 6 to 32 Amp "C" curve.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.
Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete.
Supply and fix 12 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 0.75 Sqmm copper conductor flexible wire fixed complete all as specified and directed.
Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. Note BLDC Fan should work on existing electronic fan regulator.
S&f Wall mounted fans AC single phase 230/240 V, of size 400 mm sweep, speed RPM 1400,Sturdy and shock proof body for fixing of wall fan complete.
Supply and Fix 100 W High efficient LED Flood light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV for fixing the light fittings on Wall fixed complete as specified and directed.
supply and fix recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete.
S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete.
Taking down carefully the existing ceiling fan of 1200/1400mm from its position after disconnecting electric connection and making good surface deposits to MES store all as specified and directed.
Schedule of Credit
SHREE RAM BUILD TECH
M/s SAAR ENGINEERS
imran construction company
ANSH VANSH CONSTRUCTION COMPANY
M/S.M.S.Devi.Const.Co
LAMBA ENTERPRISES
B S R Enterprises
M/S MSD & Associate
SHIVA ENTERPRISES
POONAM ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .