Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹77.8 L
EMD Value
₹97,300
Closing Date
29 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Staff Officer (Civil) Johilla Area
General Manager (Civil)/SO(Civil) SECL Johilla Area Nowrozabad Dist Umaria MP 485555
Renovation ,repair and maintenance of collapsed boundary wall with dust barriar at west South near dhakka side of siding under Nowrozabad sub area of Johilla Area
2026_SECL_367038_1
SECL/JHL/S.O.(C)/ eNIT-16/26-27/657 dt. 13.10.2026
Open Tender
Civil Works - Others
Percentage
90 days
SECL Johilla Area
5 documents required · 5 mandatory
₹97,300
13 Oct 2026
13 Oct 2026
31 Oct 2026
13 Oct 2026
29 Oct 2026
14 Oct 2026
13 Oct 2026 - 23 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 302.72 | cum | 226.75 | ₹68,641.76 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift | 99.9 | cum | 193.55 | ₹19,335.18 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 69.97 | cum | 6,231.15 | ₹4,36,009.77 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 34 | CUM | 5,320.05 | ₹1,80,881.7 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 427.2 | sqm | 275.7 | ₹1,17,779.04 |
| 6 | Brick work with FLY ASH BRICK in Foundation & plinth in cement morter 1:6( 1 Cement: 6 coarse sand) etc. complete as per instruction of the EIC. Cement mortar 1:6 (1 cement : 6 coarse sand) | 75.06 | cum | 5,259.85 | ₹3,94,804.34 |
| 7 | Brick work with FLY ASH BRICK in SUPERSTRUCTURE in cement morter 1:6( 1 Cement: 6 coarse sand) etc. complete as per instruction of the EIC above plinth level up to floor V level : Cement mortar 1:6(1 cement: 6 coarse sand) | 144.1 | cum | 6,440.35 | ₹9,28,082.77 |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 29,683.96 | kg | 79.85 | ₹23,70,264.37 |
| 9 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 1,932 | metre | 141.7 | ₹2,73,764.4 |
| 10 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 2,076.9 | sqm | 581.05 | ₹12,06,782.74 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.22 MB
Tendernotice_2.pdf
PDF • 0.82 MB
Tendernotice_3.pdf
PDF • 1.61 MB
BOQ_379980.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .