ADDITION /ALTERATION OF RESPIRATORY OPD FOR PROVISION OF SLEEP LAB AND PROVISION OF AIR CONDITIONING AND NITRILE RUBBER INSULATION IN CEILING OF VARIOUS WARDS/ OPDs/ ICUs TO PREVENT FROM CONDENSATION UNDER AGE (I) ASVINI, COLABA, MUMBAI

Amount

Supply & fixing 19mm thick closed cell elastometic Nitrile rubber insulation in ceiling with factory laminated glass cloth on one side, having thermal conductivity not exceeding 0.037 W/mk at mean temperature of 20ºC as per EN 12667, moisture diffusion resistence factor or 'µ'value of minimum 7000 for base insulation material without the foil as per EN 12086, fire performance such that it passes class - I as per BS476 part 7 for surface spread of flame and also fire performance of V0, HB as per UL 94, 1996, density without the foil between 40 to 55 Kg/m3. The insulation material shall be FM (Factory Mutual) USA approved and dust & fibre free complete all as specified and directed by Engineer-in-Charge ans as per manufacturer's instructions.

Supply, Installation, Testing & Commissioning of HI wall split Units Indoor/Outdoor complete with cordless remote control unit & with air ioniser and plasma filter for better indoor air quality with minimum 5 Star rating & EER 3.2 of capacity 1.0 TR complete all as specified and directed by Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of HI wall split Units Indoor/Outdoor complete with cordless remote control unit & with air ioniser and plasma filter for better indoor air quality with minimum 5 Star rating & EER 3.2 of capacity 1.5 TR complete all as specified and directed by Engineer-in-Charge.

Supply & fixing sheet metal enclousure with single pole and neutral enclosure with a two pin and earth plug and socket with MCB SP 15 Amps complete all as specified and directed by Engineer-in-Charge.

Supply & fix angle iron stand powder coated for fixing of outdoor unit including fixing arrangement complete all as specified and directed by Engr-in-charge.

Material & labour for point wiring 2.5 sqmm copper cable multi strandard cable FRLS in and including PVC conduit/casing capping incl PVC insulated 2.5 sqmm earth continuity conductor multi strandard for one industrial metal clad power socket independent from nearest DB complete all as specified and directed by Engineer-in-Charge.

Material & labour of point wiring with two run of PVC insulated unsheathed single core multi stranded copper conductor cable 1.5 sqmm (Red and Block colour), 1100 volts grade cable, FRLS, passing through and including PVC casing caping 25/32 mm size including accessories and PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following complete all as specified and directed by Engineer-in-Charge :-

One light point controlled by one way switch.

One fan point controlled by one way switch with fan regulator.

One 3 pin socket outlet, 5 Amps on the Independent board.

Ditto all as per item No 7.00 above but with 4.0 sqmm cable for one 3 pin socket outlet 15 Amps on the independent board.

Supply & fixing ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

Supply and fixing modular switch, 1 way 6 Amp, 1 module complete all as specified and directed by Engineer-in-Charge.

Supply & fixing modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed by Engineer-in-Charge.

Supply & fixing modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

Material & labour modular switch, 1 way 16 Amp, 1 module complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs of MCB DB Single Pole and Neutral sheet metal enclosure, double door 8 Way, 200 Amps rated bus bar for each phase, 240 volts, complete with din rail, Neutral and Earthing bar complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 240 Volts, 10 KA, "C" curve miniature circuit breaker (MCB) of SP upto 32 Amp current carring capacity in the MCB DB complete with connection testing and commisioning, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing of 240 Volts, 10 KA, "C" curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp current carring capacity in the MCB DB complete with connection testing and commisioning, complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, warm white/white/dim light surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for false ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Exhaust fan, steel body AC single phase, 230volts, 50Hz of size 300mm sweep (12") with blades, frames and louvers shutter including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and directed by Engineer-in-Charge.

Material and labour for Cutting hole in existing concrete or brick wall for fixing 300 sweep exhaust fan and making good the hole including proper internal plaster work and surface finish in side and outside the hole as per site requirement complete all as specified and directed by Engr-in-Charge.

Material & labour for sub main wiring in surface/ recessed as site required with two single core PVC insulated unsheathed FRLS copper conductor cable 1100 volt grade multistandard of size 4.0 sqmm drawn through and including PVC casing capping 25x12mm/32x12mm including accesssories (ISI marks) , one run of 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly, including taking down old submain wiring complete and making good the disturbed surfaces all as per existing complete all as specified and directed by Engineer-in-Charge. Note:- One run of PVC casing capping 25x12mm/32x12mm, two run of 4 sq mm copper conductor & one run of 4.0 sq mm copper conductor earth wire shall be measured as one unit.

Taking down chowkhats with shutters (without taking off shutter from the frame) exc.1.50 sqm but not exc 4.00sqm each complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar/adhesive bedding (but not backing), and removing debris outside MoD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for Pergo tiles wooden mat finish of size (1200x200x8 to 10 mm ) laid over and including PVC foam 5 mm thick with S R Adhesive over 50 mm microne polythene sheet including cornices fixed all around the floor having rounded angles rounded nosing tonged and grooved edge complete all as specified and directed by Engineer-in-Charge and as per manufacture specification and instructions Make :Pergo/TDC/Silicon

Supply and fixing 2nd class hardwood in scantlings, timber framed and fixed ,wrought as in partition wall complete all as specified and directed by Engineer-in-Charge.

Material & labour for wooden wall panelling made out of 15 mm thick Ist class Hardwood boarding, treated for termite proof, planed one side and edges tongued and grooved width of panels exc 10 cm and n.exc 30 cm and fixed with coloured screws, nails beads , jambs / glue to timber frame work complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new wooden surfaces of any description over 10 cm in width or girth and finish the wood surface with two coats of synthetic varnishing over undercoat of varnish over filler liquid transparent and make the surface fully shined complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair 9mm thick 600 mm x 600mm size gypsum prelaminated tiles false ceiling fixed on and including aluminium anodized snap grid of size 605 mm x 605 mm with aluminium anodized angle 20 mm x 20 mm x 1.2 mm fixed to wall along the perimeter of ceiling with the help of nylon sleeves & screws, at 610mm centres and main and cross tees of size 31.75 mm x 31.75 mm x 1.6mm & 25.4 mm x 25.4 mm x 1.22 mm respectively with ceiling cleats / angle brackets of size 15 mm x 15 mm x 1.5 mm including 6 mm dia.G.I.wire suspended from the soffit at 1220 mm centres (upto 1200 mm length maximum) fixed to roof slabs by means of steel expansion fasteners10mm dia complete all as specified and directed by Engineer-in-Charge.

Demolition of Cement Concete any description and in any position and removing debris off the premises out side MoD land complete all as specified and directed by Engineer-in-Charge.

Taking down old aluminium windows of any description and in any position complete all as specified and directed by Engineer-in-Charge.

Supply & fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed by Engineer-in-Charge. Note :- (i) Glazing/wiremesh shall be measured and paid separately. (ii) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading, glazing pins, screws, handle etc which shall not be measured for arriving the weight.

Supply & fixing aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples fixed to aluminium shutters complete all as specified and directed by Enginner-in-Charge.

Supply & fixing sheet glass,plain 4.80mm to 5MM thick glazing all with aluminum beading, glazing pin etc, or with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Material & labour for aluminium anodised grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-104 (10mm dia and aparture 75mm) complete all as specified and directed by Enginner-in-Charge.

Supply & fixing 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed by the Engineer-in-charge.

Material and labour for treating with tar or coal tar black paint on back of chowkats, area tarred exc 0.1 Sqm but not exceeding 0.5 Sqm each complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 100 mm long stainless steel butt hinges fixed with stainless steel screw complete all as specified and directed by Engineer-in-Charge.

Supply & fixing door stopper 140mm overall length of cover plate of aluminum alloy body & tounge anodised with hard drawn steel springe fixed in floors complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teak wood lipping complete all as specified and directed by Engineer-in-Charge.

Material & labour for 0.9 mm thick decorative laminate type 1 of surface finish , colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fixing Stainless steel lock and Handle Assembly of handle of 300 mm long both sides complete all as specified and directed by Engineer-in-Charge.

Material & labour for brick work with sub class 'B' old size bricks, in half brick wall straight or curved on plan exc 6m mean radius built in cement mortar 1:6 with and including duly reinforced with 10 mm dia MS round bars 2 nos horizontally after each 4 layer of bricks complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15mm thick in CM 1:6 on other than fair faces of bricks work or concrete finished and even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new plastered or unplastered surface of wall by applying two coats of Acrylic antifungal paint (100% acrylic interior grade) on walls, over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick PCC type B-0 1:2:4 using 12.5 mm graded crushed stone aggregate as in floors, sub base or sub floors etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing wash hand basin vitreous china, white, flat black type of size 630 mm x 450 mm including CI brackets and 32 mm dia CP waste coupling including cutting for and pining in ends of bracket and connecting up supply pipes, waste or taps complete all as specified and directed by Engineer-in-Charge.

Supply and fixing / laying CPVC Pipes SDR 11 including plain CPVC SDR 11 fittings of 16 mm dia including cutting pinning and connecting to supply line duly concealed in ceiling /or laying in floor, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing PVC pipe 40mm dia in any position at any level all as directed duly concealed joined up to drain pipe including connecting to existing PVS waste pipe with elbow and Tee including cutting and jointing existing drain line complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 15 mm bore stop valve cast copper alloy, chromium plated, fancy type with long shank screwed down high pressure concealed type screwed both ends for pipes or union complete all as specified and directed by Engineer-in-Charge.

Supply & fixing PVC connector 15mm dia any length with CP brass nuts all as directed and connected to waste water line complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 15mm dia pillar tap CP brass pressmatic / selfclosing type, fancy type, complete all as specified and directed by Engineer-in-Charge. Make- Jaquar cat No PRS-CHR-031 /or equivalent of Marc/ Kohler as approved by GE

Material & labour for granite slabs 18 to 20 mm thick machine cut in counter top including cutting, notching and embedded the ends in walls jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing ,rounding edges complete and including 20mm thick screed bed in cement mortar (1:6) in top of brick work complete all as specified and directed by Engineer-in-Charge.

Supply & fixing stainless steel sink of overall size 680 mm x 530mm x 215 mm single bowl without drainage board made out of 1.00 mm thick 304 grade stainless steel sheet with plug, waste coupling ,washers, waste pipe, CI Cantilever brackets, connecting union to pipe complete all as specified and directed by Engineer-in-Charge.

Material & labour for cutting holes in brickwork/ PCC/ RCC using core cutter and providing 40 mm dia PVC pipe as spout of required length and making good with water proofing treatment complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 15 mm bore Bib Cock cast copper alloy chromium plated, Auto Closing System with Built in Control Cock With Wall Flange complete all as specified and directed by Engineer-in-Charge. Make- Jaquar cat No PRS-CHR-043 or equivalent of Marc/ Kohler as approved by GE

Material & labour granite (of any type) slab 18 to 20 mm thick machine cut, in skirting/ dado etc. vertical surfaces laid over cement screed, and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete with and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair plain ceiling system consisting of 600 mm x 600mm tiles (As per IS: 2095-1996: Part I) of pre coated galvanised aluminium in 0.7 mm thickness in required colour to be laid on grid systems with 15 mm wide T - section flanges in required colour having rotary stitching on the 1200 mm & 600 mm cross tees. The grid should be GI with 15mm wide T - section flanges in required colour shade having rotary stitching on all T sections i.e. the main runner, 1200 mm & 600 mm. Tees with a web height of 32 mm. Perimeter trim, wall angles of size 19x19mm, secured to walls at 450 mm maximum centres including necessary fitting and 6 mm butter fly hook GI suspenders fixed to slab using steel fastener in ceiling complete all as specified and directed by Engineer-in-Charge. Make: Armstrong/Hunter Duoglas / Everest/Gyproc as approved by GE

Supply & fixing 18/ 19mm thick plywood grade BWR fixed with screws including fixing and polishing teakwood beading 4mm thick to exposed sides, as in cupboards, shutters etc including necessary fixing arrangements complete all as specified and directed by Engineer-in-Charge.

Shree Ayyappa Engineering

BRITE INDUSTRIES