138WE/L-94/24-25

Amount

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick works or concrete surfaces finished even and smooth without using extra cement .

M&L for two coat of cement base paint on new undecorated surfaces of walls including preperation of surfaces

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar complete all as specified and directed.

M/L Pre-cast cement concrete 1:3:6 type C1 (20mm graded stone aggregate) block masonry with solid blocks, exc 10cm in width and setting in cm 1:6 complete all as specified and directed.

All as per item No 5.00 above but except block masonary.

M & L for Walling of random rubble, uncoursed , built in CM 1:6 complete all as specified and directed.

All as per item No 7.00 above but except stone

M&L for raised pointing to random rubble stone masonary upto course in CM 1:4 complete all as specified and directed.

Demolition cement concrete (unreinforced) of any descriptions, in ground floors not exc. 15 cm thick, above or below ground level, complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 Type B1 (using 20mm graded stone aggregates) as in floors & hard standing, complete all as specified and as directed by the Engineer-in-Charge.

M&L Forming Construction (dummy) joint 30mm deep x 10mm wide filled with sealing compound, Grade `B', complete all as specified and as directed by Engr-in-Charge.

Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), as in , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs not provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for Coloured Chequered cement concrete tiles, machine pressed, factory made of size 300mmx300mmx25mm thick, set, jointed and pointed in neat cement slurry, with grey cement and no pigment, laid in floors, over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M & L for Coloured endura tiles, as approved make of size 300mmx300mm/400mmx400mm, 10 mm thick, set, jointed and pointed in neat cement slurry, with grey cement and no pigment, laid in floors, over and including 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

M&L Sand cushioning under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking Coloured/grey paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, complete all as specified.

M&L for Machine pressed precast conctete interlocking coloured/grey paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment, complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base of floors complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black, complete all as specified

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for and removing debris outside the premises.

M & L PCC 1:3:6 type C2 using 40mm graded aggregate in surface channels and drain, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

S&F in repair Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F in repair 3 mm thick pre coated aluminium composite panel cladding of approved colour and shape, joints filled with silicone sealant, fixed as per manufacturer's instruction complete all as specified and directed.

Dismantling posts or struts (wooden, steel or RCC) any section embadded in concrete, brick work etc including taking out embedded portion and making good.

Excavating in post holes hard/dense soil (of similar holes) each n. Exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. Exc. 50m and making good surface complete all as specified and directed.

S&F angle iron section with swain neck as in fencing posts struts including notching drilling holes for wire mesh etc and fla iron fillets for securing wire mesh etc including all necessary drilling, bolting or riveting and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing in-cluding line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified & directed.

Supply only mild steel Galvanised wire Chain link fencing square mesh of any size made out of any size wire complete all as specified & directed

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other ends with washers n . Exc 12mm dia and , n exc 5cm long complete all as specified and as directed.

Two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to steel surfaces n. exc 10cm width or girth including preparation of surfaces

S & F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised MS wire staple or steel pins etc as directed (each line wire to be measured.) in repairs.

M&L for two coats of synthetic enamel paint on new/old untreated steel sheets, iron surfaces including preparation over a coat of red oxide Zinc chrome primer.

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern. complete all as specified

S & F, Rolled/ tubular sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.and similer work conforming to Fe-290 Gde E-165 .complete all as specified and directed.

Dismantling structural steel work including doors and gates of any description.

S&F Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.

M & L, Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping scr-ews as spfd, complete all as spfd and directed by Engr-in-Charge.

M&L for one coats of Synthetic emulsion paint of any description on old plastered surfaces or concrete surface of any description over 10cm girth or width not other wise described including preparation, complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of Synthetic emulsion paint of any description on new plastered surfaces or concrete surface of any description over 10cm girth or width not other wise described over a coat of primer.complete all as specified and directed by Engineer-in-Charge.

M&L for applying one coat of oil exterior emulsion paint (Apex Ultima) on old plastered or treated surfaces surfaces of desired finish as app by Eng-in-charge

Horizon Construction Company (BID ID -3177554)

M/S Stanzin Tharchin (BID ID -3170288)

PARIDHI CONSTRUCTION (BID ID -3172661)

M/S MA CONSTRUCTION Co (BID ID -3169660)

M/S SHAMSHER ALI SUFI (BID ID -3171534)