Renovation of Guest House at AMPRI,Bhopal

Amount

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. ----12.42.4 Single tee without door -110 x110 x110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend

Providing and fixing on wall face unplasticised - PVC pipe clips of approvd design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarsed sand ) and making good the wall etc complete. 110 mm

12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand)

Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Two or more coats

Distempering with 1st quality acrylic distemper, (Premium plastic paint) having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two or more coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work having VOC content less than 50 grams/ liter

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :100 mm dia pipe

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15 mm to 40 mm nominal bore

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of E-IN-C

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe 40 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder :C.P. brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40mm nominal outer dia pipes

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length 20 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

15 mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Cutting holes up to 30x30cm in walls including making good the same 18.76.1 with common burnt clay F.P.S. (non modular) bricks

Providing and fixing C.P. brass angle valve angular stop valve with wall flange MAKE SOMANY /JAGUAR /Kohler/Hindustan for basin mixer and geyser points of approved quality, 15mm nominal bore including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing two way bib cock with wall flange MAKE SOMANY / JAGUAR / Kohler/Hindustan complete as per instruction of E in C including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C(KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing Square Jali-150 mm of make as specified of approved quality as per instruction of E-in-C

Providing and fixing unplasticised PVC moulded fittings / accessories for unplasticised Rigid soil and waste pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 45 Degree 110 mm

Providing and fixing unplasticised PVC moulded fittings / accessories for unplasticised Rigid soil and waste pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expansion. Cowel MR-110 mm

Providing and fixing unplasticised PVC moulded fittings / accessories for unplasticised Rigid soil and waste pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expansion. P-Trap 110 X 110

Providing and fixing white vitreous water closet with seat and lid, 180 MM (490X340X340) WITH SOFT CLOSE SEAT COVER MAKE Kohler/ Hindustan/ SOMANY/JAGUARincluding flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing Hand shower (Health fauchet) brass with flexible tube upto 1.5 metre long including all fiitings etc complete as approved by Engineer - in - charge MAKE Kohler/ Hindustan/SOMANY/JAGUAR

Providing and fixing towel rail 60 cm complete with brackets fixed to cleats with CP brass screws with concealed fittings arrangement of approved quality and colour MAKE Kohler/ HindustanSOMANY/JAGUAR 600 MM LONG as per manufacturer specifications (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing Metropole flush Valve 32 mm size (Concealed body) with exposed shut off provision & round flange (3.0 liters/6.0 liters per flushing) 1.5" make SOMANY/ JAGUAR/ Kohler/Hindustan as per manufacturer specification and direction of engineer incharge. (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Brick work with chimny brick of superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing body of hi flo divertor including spout MAKE SOMANY/JAGUAR/Kohler/ Hindustan CP Brass of quality & make as approved by Engineer in charge including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C(KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing exposed part kit for hi flo divertor MAKE SOMANY/JAGUAR /Kohler/ Hindustan CP Brass of quality & make as approved by Engineer in charge including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing wall to wall brackets with SS STUD including all fitiings, screws etc complete as per E-in-C

Providing and fixing SS curtain rod 1" dia weight not less than 1.3 kg .

Providing and fixing shower arm 15" wall mounted with flange MAKE SOMANY/JAGUAR/ Kohler/ Hindustan CP Brass as approved by Engineer in charge of quality & make including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing rain shower MAKE SOMANY/ JAGUAR/ Kohler/Hindustan CP Brass of quality & make as approved by Engineer in charge including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Repairing/replacing of existing glass including changing/repairing wooden shutters as per site condition, refixing glass 4mm with beading and nails, changing broken handles, tower bolts ect along with other fittings if required etc. to make window fully functional complete as per E-in-c

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, three layer, with cover and float valve etc complete

Providing and applying two or more coats water proof painting on external surfaces including cleaning the surftace by brooming mopping and dirt free as per manufacturer specification

Providing and fixing CPVC valve 50mm dia to existing pipeline near water tank

Providing and fixing brass female trade brass FABT to push vale/ other fitting in 32mm dia with all accessries fittings and fixutres complete as per direction and instructon E-in-charge.

Providing and fixing brass male trade brass MABT to push vale/ other fitting in 32mm dia with all accessries fittings and fixutres complete as per direction and instructon E-in-charge.

Providing and fixing brass female trade brass FABT to push vale/ other fitting in 40mm dia with all accessries fittings and fixutres complete as per direction and instructon E-in-charge.

Providing and fixing brass male trade brass MABT to push vale/ other fitting in 40mm dia with all accessries fittings and fixutres complete as per direction and instructon E-in-charge.

Providing and fixing brass female trade brass FABT to push vale/ other fitting in 50mm dia with all accessries fittings and fixutres complete as per direction and instructon E-in-charge.

Providing and fixing brass male trade brass MABT to push vale/ other fitting in 50mm dia with all accessries fittings and fixutres complete as per direction and instructon E-in-charge.

Providing and fixing CPVC tank nipple 50mm dia to existing water tank in water supply as per instruction and direction E-in-C

P/f crack seal including scraping, finishing etc. complete as per manufacturer specification

Providing and applying multicoat synthetic plaster as per approved design, pattern texture in 2 mm thick on new plastered surface finished in proper line and level as directed by Engineer-in-charge in five coats consisting of composition of four order of application given as under includig all materials, labour and scaffoldings etc. 1) Scrapping of the new surface and applying sealer primer mixed with water in the ratio 1:3 (part sealer primer : 3 part water) and applying by brush @ 0.25 kg/sqm. 2) Applying levelling coat of spectrum rustic fine or equivalent with trwel as a putty finished to generate required texture by trowel. 3) Applying third coat of synthetic plaster with trwel @ 2.5 kg/sqm finished to generate required texture by trwel. 4) Applying two coats of exterior super fine pigmented acrylic wall coating as top coat @ 0.5 kg/sqm in two coats and colours as approved by Engineer-in-charge all up to a height of 10m

Providing and fixing flush doors 30 MM thick ISI mark with decorative lamination 1.0 MM thk on both sides including teak wood beading on edeges etc complete as per E-in-C

Providing and fixing roller blind of approved make design in window of required size in approved pattern and design as directed by E-in-C

Providing and fixing mirror of Rectangular shape 1500x450 mm superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 5 mm thick hard board backing

Providing and fixing Ist quality ceramic glazed wall tiles of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ,including pointing in white cement mixed with pigment of matching shade complete. size of tiles 300X400 min or max 300x600

Providing and laying rectified Glazed Ceramic floor tiles of size 450x450 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing wash basin of size 550x 400 mm in required shape with C.I. brackets, C.P. brass pillar tap MAKE SOMANY /JAGUAR /Kohler/Hindustan single lever for hot and cold water 32 mm, C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing of counter plateform for kitchen cabinet with Granite of average thickness 16mm over Marble stone of average thickness approx 16mm of size of plateform 0.75x 3.90M (approx) on plan and 0.80 high. Vertical wall of the cabinet will be of pink marble. The edges of plateform will be moulded in required shape.The back side of wall of the modular section surfrace will be of digital printed 600x450 tiles or as per site requirement up to hight of 60 cm above plateform . Below the plateform vitrified tiles of size 600x600 be fixed in wall by suitable cement mortar or adhesive as required as per site requirement and instruction and decision of E-in-C.

Providing and fixing of counter plateform for kitchen cabinet with Granite of average thickness 16mm over Marble stone of average thickness approx 16mm of size of plateform 0.75x 2.20M (approx) on plan and 0.80 high. Vertical wall of the cabinet will be of pink marble. The edges of plateform will be moulded in required shape.The back side of wall of the modular section surfrace will be of digital printed 600x450 tiles or as per site requirement up to hight of 60 cm above plateform . Below the plateform vitrified tiles of size 600x600 be fixed in wall by suitable cement mortar or adhesive as required as per site requirement and instruction and decision of E-in-C.

Providing and fixing of counter plate form for kitchen cabinet with Granite average thickness 16mm over Marble stone of average thickness 16mm size approx 0.75x 3.0M (approx) on plan and 0.80 high. Vertical wall of the cabinet will be of pink marble. The edges of plateform will be moulded in required shape.The back side of wall of the modular section surfrace will be of digital printed 600x450 tiles or as per site requirement up to hight of 60 cm above plateform . Below the plateform vitrified tiles of size 600x600 be fixed in wall by suitable cement mortar or adhesive as required as per site requirement and instruction and decision of E-in-C.

Providing and fixing under cabinet in exiting structuresize approx 0.75x 3.90M (approx)on plan and 0.80 high with dravers of required size of S.S.basket/ drawers/ door with slider channels of make GODREJ/EPCO/BLUM and other fittings including handles 100 mm long , hinges of makeGODREJ/EPCO/BLUM etc. as needed and plyboard/blockboard 16mm of approved make and mica 0.75 mm on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing under cabinet in exiting structuresize approx 0.75x 2.20M (approx)on plan and 0.80 high with dravers of required size of S.S.basket/ drawers/ door with slider channels of make GODREJ/EPCO/BLUM and other fittings including handles 100 mm long, hinges of makeGODREJ/EPCO/BLUM etc. as needed and plyboard/blockboard 16mm of approved make and mica 0.75 mm on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing under cabinet in exiting structuresize approx 0.75x 3.0M (approx)on plan and 0.80 high with dravers of required size of S.S.basket/ drawers/ door with slider channels of make GODREJ/EPCO/BLUM and other fittings including handles 100 mm long , hinges of makeGODREJ/EPCO/BLUM etc. as needed and plyboard/blockboard 16mm of approved make and mica 0.75 mm on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing over cabinet in exiting structure of kitchen of size approx 0.45x 3.90M (approx)on plan and 1.50 high with doors of required size and other fittings handles locks, hinges etc. as needed and plyboard 16 mm and mica 0.75mm on front and balancing lamination on back and fitting of make hettich/ hafle/ blum.The over cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing over cabinet in exiting structure of kitchen of size approx 0.45x 2.20M (approx)on plan and 1.50 high with doors of required size and other fittings handles locks, hinges etc. as needed and plyboard 16 mm and mica 0.75mm on front and balancing lamination on back and fitting of make hettich/ hafle/ blum.The over cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing over cabinet in exiting structure of kitchen of size approx 0.45x 3.0M (approx)on plan and 1.50 high with doors of required size and other fittings handles locks, hinges etc. as needed and plyboard 16 mm and mica 0.75mm on front and balancing lamination on back and fitting of make hettich/ hafle/ blum.The over cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing door skin (Mika based) 0.75mm in required shape size and patern as per requirement and direction of E-in-charge in both side of door of size 2.1M x 0.95M including removing the door if require and refixing the door by suitable hinges and pasting the skin by suitable adhasive, scrapting old surface,fixing reap of suitable door with 10mm thick and fixing acro tape etc. to give smooth finish.

Providing and fixing premium 8" cysplate mortise door lock handle set with lock and cylinder set with both side keys in required size, design and shape. Make-Sardar or equivalent

Providing and fixing Al drop set 10" Brass with handle, tower bolt etc. in required size, design and shape .

providing and fixing mosquite/fly proof SS door in teak wood of size 2.1 meter x 0.9 M with upper middle and bottom rails and supported beading with butt hinges and latch including puty, primer, two coats of enamel paint etc complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

Providing and fixing false ceiling in required and shape to suspended to ceiling at a suitable height of 30 cm in GI runners and channel frame work profle section in Gyproc board in desired shape and size including coping, flat surface and desired cutting in architectural shape as per direction of E-in-charge

Dismantling existing Dewas section Chowkhat removing holdfast,door and repairing the same in brickwork in 1:4 cement mortar including plastering and repairing the chowkhat.

Fixing Granite of minimum thickness 16mm chowkhat in cement mortar 1:4 and neat cement including patam 5 cm to hold wooden door of size 2.1M x 0.80M making hole for L-drop tower bolt and door latch and fixing the door with butt hinges with Araldiet or suitable Adhasive with Rawl plug or hold fastner to width of wall approxmate 16 cm as per instruction of E-in-Charge

Labour for cleaning and miscellanious work

Providing and fixing shed in profile sheet 0.5 mm in desired colour and shade in top roof and in sides alongwith structure in M.S. square tubular pipe of 2" x2" alongwith self tapping screw etc.and grouting the pipe in ground in cement concrete atleast 30cm deep including making floor in cement concrete 1:2:4.(size of shed) .

Making service window of size 1M x 0.75 including dismentling wall for making window plastering rough edges in cement plaster 1:4 (1cement : 4 sand) and fixing granite in all four edges with suitable adhasive and sliding window 2 track aluminium section power coated with glass 4mm thick.

Providing and fixing Mica 1.0 mm in existing plyboard including scrapping the surface and making it smooth by suitable adhesive in require design pattern and colour .

Providing and fixing two numbers designer Handle 6 inch including towel bolt 6 inch and cupboard lock with key in existing cupboards

Providing and fixing High Density Fiber (HDF) wooding flooring 8MM thick Laminated floor in tiles of size 1215x195x8mm surface middle Emboissed and Unilin click locking grade AC4 of make Heritage / SS classic

Providing and fixing under cabinet in exiting structuresize approx 0.75x 1M (approx)on plan and 0.80 high with dravers of required size of S.S.basket/ drawers/ door with slider channels of make GODREJ/EPCO/BLUM and other fittings including handles 100 mm long, hinges of makeGODREJ/EPCO/BLUM etc. as needed and plyboard/blockboard 16mm of approved make and mica 0.75 mm on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing of counter plateform for kitchen cabinet with Granite of average thickness 16mm over Marble stone of average thickness approx 16mm of size of plateform 0.75x 3.90M (approx) on plan and 0.80 high. Vertical wall of the cabinet will be of pink marble. The edges of plateform will be moulded in required shape.The side of wall of the modular section surfrace will be of digital printed 600x450 tiles or as per site requirement up to hight of 60 cm above plateform . Below the plateform vitrified tiles of size 600x600 be fixed in wall by suitable cement mortar or adhesive as required as per site requirement and instruction and decision of E-in-C.

P/F Glazed Aluminium powder coated section in windows and ventilators including all fittings and fixtures as per E-in-

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing & Supplying wooden Box bed 6'0"X6'6" in size with side tables with 6" thick mattress with memory form including pillows,bed sheet,quilt etc complete(make godrej,Kosmo,Stellar or equivalent)

Providing & Supplying feather touch 3+2 sofa set with centre table and side table complete set(make godrej,Kosmo,Stellar or equivalent)

M.R.Traders

WOOD DECORATION

MAITRI ENTERPRISES