Providing concertina coil f...

Amount

[HSR 11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)

[HSR 11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand)

[HSR 11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.

[HSR 11.95.1]Finishing walls with Acrylic Smooth exterior paint of required shade : 1. New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

[HSR 13.28]Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

[HSR 30.23.1]White washing with lime to give an even shade : 1. Old work (two or more coats)

[HSR 30.28.1]Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1. One or more coats on old work

[HSR 4.14.1]Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil.

[HSR 5.7.4]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar

[HSR 6.1.7]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 7. 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

[6.2.1]Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing: 1. 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

[HSR 6.8.2]Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 2. 40mm thick

[HSR 7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand)

[HSR 7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand)

[NS Item] Providing and fixing GI Barbed wire fencing weighing 9.8 kg per 100 mtr (Horizontal/Diagonal) fixed with GI wire/staple of 12 gauge in cut/holes in the angle iron `Y` shaped posts to be welded with grills fixed on existing boundary wall, complete in all respect as directed by the Engineer-in-charge. (including the cost of GI wire/staple used for binding which shall be not measured for payment but excluding cost of angle iron posts including cut/driling holes which is payable under HSR item 13.28) (sample of fencing to be got approved from Engineer-in-charge).

[NS Item] Providing and fixing concertina coil fencing with punched tape concertina coil 600mm/700mm dia, (weighing 150 to 160 kg per 100 mtr of make as approved by the Engineer-in-charge and confirming to IS specification), upto 4 metre height of wall with existing angle iron ‘Y’ shaped posts having barbed wire fencing welded with existing iron grills fixed on boundary wall (excluding the cost of angle iron posts and barbed wire fencing), fixed with plain GI wire of 16 gauge, complete in all respect as per direction of Engineer-in-charge (plain GI wire used for binding shall not be measured for payment).

[NS Item] Fixing of iron grill fencing on the top of existing boundary wall (iron grills will be supplied by the department free of cost) excluding the cost of cement concrete block.

[NS Item] Providing and fixing precast reinforced cement concrete jali 1:1½ :3 (1 Cement : 1½ Coarse sand : 3 stone aggregate 6mm nominal size) of hexagonal shape with 125mm wide and 37mm thickness and inner frame of jali members 40mm x 40mm x 85mm thick, reinforced with 14 gauge mild steel wire, at all height, including centering and shuttering, roughening, cleaning and fixing and finishing in cement mortar 1:2 (1 Cement : 2 fine sand) etc. complete in all respect as per architectural drawing and design with the entire satisfaction of Engineer-in-charge.

M/S SANWARIYA CONSTRUCTION

KHOKHER CONSTRUCTION COMPANY AND BUILDING MATERIAL

Sanjeet Kumar Contractor

Ashok Kumar Contractor

sonu sangwan contractor