Loading
Loading…
Loading…
Tender Value
₹59.8 L
EMD Value
₹1.2 L
Closing Date
22 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
Above/Below/Par
EMS PLNG
16 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB (attached), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non fulfillment of this criteria shall lead to summarily rejection of offer.
Copy of the License for A Class Electrical Contractor license, issued by Director, Electrical Safety of State Govt. Of U.P. or of equal Status of any other State Govt shall be submitted with tender documents. The original copy shall be produced to the office whenever required for verification. If A Class Electrical Contractor license has been expired, tenderer shall submit receipt of renewal electrical contractor license. Non submission of the A Class Electrical Contractor license shall lead to summarily rejection of tenderer
All tenderers have to submit/upload the Brand/Make declaration certificate as per attached format Annexure-A for all of the items/materials of the bid. Non submission of Annexure-A certificate shall lead to summarily rejection of offer ( Click here to download Format)
7 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All the rates shall invariably be quoted in net i.e. inclusive of GST.
Replacement of overaged Distribution Transformers ,Panels & other equipments in 11KV/415V Substations in RDSO Lucknow
11-2025-26
11-2025-26
Open
Works - General
6 Months
Lucknow, Uttar Pradesh
₹0
₹1.2 L
22 Jun 2026
19 May 2026
8 Jun 2026
51 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 59,84,997.35 | ||
| — | 1.00 | — | — | ||
| Dismantling / removal of, LT Panels, Cables, Main Switches, Distribution Boards, Wiring ,Switch Boards etc. and deposit the released material duly segregated to concerned store in charge, complete in all respect | — | — | — | 10,000 | |
| — | 2.00 | — | — | ||
| Supply Installation, testing & commissioning of 800 KVA, 11/0.415 KV, 3-Phase, 50 Cycles, ONAN cooled, Delta/Star (Dyn 11 Group), Outdoor Type, Cu Wound OFTC Transformer with first fill of Transformer Oil and with standard fittings conforming to IS-1180/2014 EEL-II., Complete in all respect as per site requirement. (As per attached specification) | — | — | — | 26,01,900 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing & commissioning of LT control panel { Cubical type, sheet thickness gauge SWG-16} Comprising of following, including 800 A main Al Bus-bar, (confirming to RDSO spec. no. EMS-02/(Revised)/2009, 10.12.09) - 02 I/C MCCB of 630A/ 415V, 36kA, 4 pole (Microprocessor based) Release - 01 Nos 630 A FP Load Break Switch - 02 O/G MCCB of 400 A/ 415V, 36kA, 4 pole (Microprocessor based) Release, - 03 O/G MCCB of 200 A/ 415V, 36kA, 4 pole (Microprocessor based) Release -06 O/G MCCB of 100 A/ 415V, 36kA, 4 pole (Microprocessor based) Release Including Fabrication, Rotary Handle, ammeter on all outgoing, multifunction meter on incoming & RYB indicator on each I/C and O/G, etc., With lockable arrangement for each unit complete in all respect as per site requirement. | — | — | — | 8,56,727.2 | |
| — | 500.00 | — | — | ||
| Erection, Laying, testing and commissioning of LT XLPE/ PVC Sheathed multi - stranded Cable on the wall using clamp, complete in all respect | — | — | — | 16,060 | |
| — | 500.00 | — | — | ||
| Supply, laying and connection of 1x8 SWG GI wire along with cable, complete in all respect as per site requirement. | — | — | — | 4,815 | |
| — | 250.00 | — | — | ||
| Point wiring with 2.5 Sq. mm PVC insulated FR/FRLS/FRLSH. copper conductor single core multi-stranded wire confirming to IS: 694 (Pt-II) , in recess rigid PVC conduit(medium duty) partly on surface and partly in wall(as per site requirement) (as per site requirement) including neutral wire , earth wire, Modular Switches ,ceiling rose, Modular Plate, GI box etc. complete in all respect to energize the light fan, call bell et. including making good the damages & (Two Coat) distempering with matching color on cutting portion of wall after plaster. | — | — | — | 1,79,250 | |
| — | Breakup | for details. | — | ||
| Circuit wiring with following sizes of PVC insulated FR/FRLS/FRLSH copper conductor single core multi-stranded wire confirming to IS: 694 (Pt-II) in recess rigid PVC conduit pipe (medium duty) partly on surface and partly in wall (as per site requirement) including making good the damages & (Two Coat) distempering with matching color on cutting portion of wall after plaster. | — | — | — | 1,40,122 | |
| — | 30.00 | — | — | ||
| Supply, installation, testing & commissioning of concealed Modular type 6 A + 6/16A Socket & Switch with suitable plate & box , complete in all respect as per site requirement(Color of Modular Plate/Switch/Socket : White) | — | — | — | 16,140 | |
| — | 15.00 | — | — | ||
| Supply Installation Testing & Commissioning of double door SPN MCBDB (4+4) on suitable angle iron frame or concealed (as per site requirement) comprising as under including connection & end termination complete as required including loop single core multistranded copper wire of suitable size as per capacity of incomer. - One incoming of 63A Two Pole isolator. - One RCCB 63A Two Pole (300 mA sensitivity) - Four Outgoings of (6 - 32) A SPMCB,10 kA,C-type Separate Suitable Neutral Link | — | — | — | 1,52,295 | |
| — | 30.00 | — | — | ||
| Installation, fixing, testing & commissioning of Exhaust fan, including making hole of suitable size and making good the wall ,complete as required Including connection with 24/0.2 three core flexible wire, complete in all respect as required | — | — | — | 8,640 | |
| — | 100.00 | — | — | ||
| Installation Testing & Commissioning of LED Tube light including connection with 24/0.2 three core flexible copper wire . as required, complete in all respect | — | — | — | 2,500 | |
| — | 20.00 | — | — | ||
| Supply, installation , testing & commissioning of 5 mtrs. high hot dip galvanized octagonal pole with longitudinal seam weld throughout the length with bottom 130 mm across face ,top 70 mm across face made of 2.75 ± 0.25 mm thick high tensile plate and 200 mmx200mmx12mm base plate complete with one/two arm of 500 mm for street light fitting installation and 4 nos. M20 (EN 8 Gr)x 700 mm long J type foundation bolt set with RCC foundation including inbuilt junction box with provision for SPMCB including connection ,complete in all respect as per site requirement.(Length/Inclination angle of arm as per site requirement) | — | — | — | 2,52,916.8 | |
| — | 120.00 | — | — | ||
| Supply, installation, testing & commissioning of 2.5 sq mm 3 core round PVC insulated copper conductor flexible wire from proposed MCB enclosure to security light fitting connection. | — | — | — | 8,864.4 | |
| — | 20.00 | — | — | ||
| Supply, Installation, Testing & commissioning of 6A SPMCB with proper termination connector of cable, complete in all respect and earthing as required. | — | — | — | 5,266.4 | |
| — | 40.00 | — | — | ||
| Installation of street light fitting including supply & fixing of GI pipe B class grade(if required) including mounting & connection with 24 / 0.2 three core flexible copper wire , complete in all respect as per site requirement | — | — | — | 10,847.6 | |
| — | 15.00 | — | — | ||
| Supply, installation, testing & commissioning and making of earthing pit providing with 06 meter long 40mm diameter 'B' class GI pipe and copper earth plate of 300x300x10 mm as earth electrode including masonry enclosure, top cover fitting and filling of earth pit with 4kg. Common salt and 20kg charcoal {imli} as per RDSO' s drawing No. EMS/SK/294 complete in all respect including painting with black colour duly indicating its value & date with white colour. {All the bolts, nuts and washer used shall be of copper} | — | — | — | 1,77,111.3 | |
| — | 35.00 | — | — | ||
| Supply, installation, testing & commissioning and making of earthing pit providing 40 mm dia,6M long 'B' class GI pipe as earth electrode and C.I/GI. earth plate of 300x300x10 mm including masonry enclosure, top cover fitting and filling of earth pit with 4kg common salt and 20kg charcoal {imli} duly connecting with 2x6 SWG GI wire from earth plate to the earth clamp provided at the top of electrode as per EMS DRG. No. EMS/SK/218/71 [Rev.} | — | — | — | 1,37,722.55 | |
| — | 250.00 | — | — | ||
| Supply, installation, testing & commissioning of copper earth strip 2X25X5mm from earth electrode to neutral point complete in all respect. | — | — | — | 2,39,027.5 | |
| — | 500.00 | — | — | ||
| Supply, installation, testing & commissioning of GI strip 1x50x5 mm from earth electrode, complete in all respect. | — | — | — | 56,550 | |
| — | 100.00 | — | — | ||
| Supply & installation of danger plate, complete in all respect. | — | — | — | 52,286 | |
| — | 15.00 | — | — | ||
| Supply & installation of 6 nos. Fire buckets with stand, complete in all respect. | — | — | — | 86,271.6 | |
| — | 600.00 | — | — | ||
| Supply Installation Testing & Commissioning of acrylic type LED Glow signage Board including MS frame for mounting and supporting the board , complete in all respect as per site requirement | — | — | — | 5,64,684 | |
| — | 15.00 | — | — | ||
| Supply Installation Testing & Commissioning of 1 KVA Sine Wave Inverter (1 Nos) along with 1 No's Tubular (Maintenance Free Battery) -150 Ah capacity ,12V,including supply & fixing of MS stand for mounting inverter & battery , including inverter wiring to charge the Light, Fan points etc. as required, complete in all respect as per site requirement. | — | — | — | 3,75,000 | |
| — | 2.00 | — | — | ||
| Dismantling of existing Transformer of 750KVA with necessary disconnections including transportation and deposit the relesed material to the concerned store in-charge ,Complete in all respect as per site requirement | — | — | — | 15,000 | |
| — | 1.00 | — | — | ||
| Dismantling of existing 200 KVA DG Set with necessary disconnections including transportation and deposit the released material to the concerned store in-charge ,Complete in all respect as per site requirement | — | — | — | 15,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCAmmendement1.pdf
ATTACHMENT
GCCAmmendement2.pdf
ATTACHMENT
GCCAmmendement3.pdf
ATTACHMENT
GCCAmmendement4.pdf
ATTACHMENT
WiringCablelayingpanel.pdf
ATTACHMENT
WiringSpecification.pdf
ATTACHMENT
PaymentCondition.pdf
ATTACHMENT
LetterofCredit.pdf
ATTACHMENT
GENERALINSTRUCTIONSTOSCHEDULEOFWORK.pdf GENERAL INSTRUCTIONS TO SCHEDULE OF
ATTACHMENT
EarthingDrawing.pdf
ATTACHMENT
CopperEarthingDrawing.pdf
ATTACHMENT
Spec800kVATransformer.pdf
ATTACHMENT
GCC-April2022.pdf
ATTACHMENT
VIB.pdf
ATTACHMENT
GCCAmmendement5.pdf
ATTACHMENT
AnnexureA_1.pdf
ATTACHMENT
GENERALINSTRUCTIONSTOSCHEDULEOFWORK.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .