Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAccepted-AOC WARD NO 18 SONI MOHALLA CHANDAMETA DIST CHHINDWARA M P PIN NO 480447 | CHANDAMETA | CHHINDWARA | MADHYA PRADESH | 480447 | L1 | Accepted-AOC Bidder is L1 and has quoted lowest item rates overall | |
| 2 | L2₹2.9 L+₹89,695.98 (44.9%)Rejected-Finance WARD NO 09 SHIV COLONY WEAR HOUSE ROAD PARASIA DISTT CHHINDWARA M P | CHHINDWARA | MADHYA PRADESH | 480441 | L2 | Rejected-Finance Quoted higher rate |
Tender Value
₹3.3 L
EMD Value
₹4,200
Closing Date
11 May 2026, 6:00 pmClosed
Staff Officer (Civil), Pench Area
Staff Officer (Civil), AGM Office, Pench Area, P.O. Parasia, Dist. Chhindwara (M.P.) 480441
Repairing of existing pipeline at Nehariya UG mine premises under Nehariya Sub Area of Pench Area.
2026_WCL_358906_1
pe3350-civ-s-e006-2026-27
Open Tender
Civil Works - Others
Percentage
60 days
NEHARIYA SUB AREA
As Per NIT
3 documents required · 3 mandatory
₹4,200
17 Jun 2026
29 Apr 2026
12 May 2026
29 Apr 2026
11 May 2026
30 Apr 2026
29 Apr 2026 - 4 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) PE-100, 50mm | 320 | Rmt | 83 | ₹26,560 |
| 2 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) PE-100, 25mm | 650 | Rmt | 45 | ₹29,250 |
| 3 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) PE-100, 20mm | 50 | Rmt | 38 | ₹1,900 |
| 4 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 50mm | 25 | No | 792.85 | ₹19,821.25 |
| 5 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm | 5 | No. | 351.45 | ₹1,757.25 |
| 6 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms | 5 | No. | 103.85 | ₹519.25 |
| 7 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore | 25 | No. | 354.8 | ₹8,870 |
| 8 | Providing and fixing PTMT pillar cock of approved quality and colour. | 5 | No. | 169.45 | ₹847.25 |
| 9 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 5,000 | No. | 8.75 | ₹43,750 |
| 10 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. | 30 | No. | 99.55 | ₹2,986.5 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 1.97 MB
BOQ_371773.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .