REPAIR/MAINT INCLUDING REPLACEMENT OF DAMAGED FLOOR AND WALL TILES AND ALLIED WORKS AT MES AREA, REPAIR/MAINT OF FLOORING, SUNKEN AND ALLIED WORKS AT MES ENCLAVE, REPAIR/MAINT INCLUDING REPLACEMENT OF SERVICE CONNECTIONS IN VARIOUS MD ACCN IN OMQ/SMQ

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles of size 300x200x7mm/450x300 x7mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed

M & L for 25mm thick PCC (1:2:4), type B-0, (using 12.5mm graded crushed stone aggregate), as in sub base for flooring etc., complete all as specified and directed.

M&L for joint free white non skid ceramic coloured tiles 7 to 8mm thick, light grade, (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, light shade, (square/rectangular), polished, area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘orissa’ pattern, size 630x 450mm white, with integral foot rests, and lime concrete bedding etc. (excluding flushing cistern and flush pipe), complete all as specified and directed

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in-let, ball valve, float and handle, complete all as specified and directed.

S&F in repair vitreous china wash basin, ovel shape, pastel, flat back of size 580 x 450mm including PVC waste pipe 32mm bore, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for refixed or removing from site of work, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for refixed or removing from site of work, complete all as specified and directed.

Taking down 25mm bore steel water tubing and connection from wall/ceiling surfaces including cleaning for refixing or removal from site of work, complete all as specified and directed.

S&F galvanised steel water tubing and connection, 15mm bore, medium grade with all fitting, fixed complete to walIs and ceilings or laid in floors and making good surfaces as per existing, complete all as specified and directed.

S&F 20mm dia CPVC pipes SDR-11 & plain CPVC SDR 11 fittings, high pressure, fixed on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, end plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F 25mm dia CPVC pipes SDR-11 & plain CPVC SDR 11 fittings, high pressure, fixed on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, end plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F in repair pillar taps 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type, complete all as specified and directed.

S&F in repair bib tap 15mm bore, fancy type, chromium plated, with crutch or butterfly handle, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15mm bore, fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore two way bib taps, fancy type, chromium plated, cast copper alloy screwed down, with crutch or butterfly handle, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repair 15mm bore angle valves, 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions etc, complete all as specified and directed.

S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints including fixing to 15mm bore steel pipe or union, complete all as specified and directed.

S&F in repair CP shower arm 15mm bore, 195mm long with bend of 45 degree with flangs, brass, chromium plated, with long head arm for fixing with 15mm bore GI pipe or union, complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repair of 32mm size PVC solid waste pipe for wash hand basin and sink, 800mm long, complete all as specified and directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed.

S&F 5.5mm thick glass shelf of size 12cm wide x 60cm long for wash hand basin etc., complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solven cement as in repairs, complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT, any colour, high pressure, screwed for iron pipe & fixed (minimum weight 90gms), complete all as specified and directed.

S&F in repair PTMT grating round 140mm (minimum weight 50 gms), complete all as specified and directed.

Supply, install, test and commissioning of Outdoor type LT Feeder pillar box made out of 3.0mm thick CRCA sheet out door type, CPRI Approved, totally enclosed weather dust and vermin proof as per IS with front and rear, Bush bar current carrying capacity 240 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary made out of 50 X 50 X 6 mm angle iron grouted at Floor above 30 cm from ground level including PCC ,(1:3:6) in foundation Comprising the following including taking down old unserviceable feeder pillar box, , complete all as specified and directed. Note: Cost includes necessary internal wiring for meters, indication lamps, etc. and rigid bus bar connections from bus bar to MCCB terminals connection Bus to MCCB/MCB connections. BUS BAR CHAMBER (a) Sheet steel bus bar chamber having front hinged covers with a set of electrolytic grade high conductivity TP&N solid aluminium bus bars rated 300 amps supported at required intervals sleeved with heat shrinkable PVC slevings. The bars shall be colour coded at required intervals for identification INCOMER (a) MCCB of 4 pole of capacity 160 amps with breaking capacity of 25 KA INDICATING DEVICES (a) LED Indicating lamps for Main Supply indicating R Y B OUTGOING FEEDERS (a) MCCB of 4 pole of capacity 63 amps with breaking capacity of 16 KA -04 Nos.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core including taking down old unserviceable LT UG cable, complete all as specified and directed.

All as per item No. 32.00 here-in-before but size 25 Sqmm 3.5 core, complete all as specified and directed.

All as per item No. 32.00 here-in-before but size 16 Sqmm 4 core, complete all as specified and directed.

All as per item No. 32.00 here-in-before but size 10 Sqmm 4 core, complete all as specified and directed.

Lifting of existing cable PVC/XLPE insulated, armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor in trenches/fixed on wall, cross sectional area 35 sqmm to 50 sqmm 3.5 core, including re-laying the cable at same or other location. complete all as specified and directed. Note: (i)Necessary earth work shall be measured and paid separately. (ii) Cost of lugs of suitable size and cable gland irrespective of length of cable shall deemed to be included in the unit quoted rate.

All as per item No. 36.00 here-in-before but cross sectional area 10 sqmm to 25 sqmm 3.5/4 core, complete all as specified and directed.

All as per item No. 36.00 here-in-before but size 10 sqmm to 16 sqmm 2 core, complete all as specified and directed.

M&L for GI tubing 40mm bore, light grade, with all fittings for protection of LT UG cables, laid in trenches all as specified and directed (Note: Excavation and earth work will be measured and paid separately.)

All as per item No. 39.00 here-in-before but 50mm bore, light grade, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole/stay, or cable trenches and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

M&L for horizontal boring under the road below 1m from the road surface and dia of hole n. exc. 100mm, without damaging the existing road, getting out and disposal of soil to a distance n. exc 100m from the site of work, complete all as specified and directed.

S & F in repair cable, 3 core, PVC insulated unsheathed multistranded copper conductor of size 2.5 Sqmm passing through PVC conduit from junction box to fitting, complete all as specified and directed. Note : PVC conduit shall be measured and paid seperately.

S&F MCB TP 50 to 63 Amps, 10 KA, 'C' curve, complete all as specified and as directed.

S&F MCB TPN 50 to 63 Amps, 10 KA, 'C' curve, complete all as specified and as directed.

M &L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized wire of size 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part -1, including necessary excavation and earth work, P.C.C (1:3:6) type C-1 with 50mm thick Pre-cast R.C.C. (1:2:4) type B1 cover slab (reinforced with 8mm dia deformed bar 15cm C/C both ways and suitable handle of 10mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the earth electrode, with funnel and 20mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, Gl earth wire protected by 15mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismantling of old unserviceable earthing of any descriprtion, complete all as specified and as directed. Note : (i) Proper earthing pit should be provided with pit cover. (ii) GI earth strip upto 7.5m is demed included in the unit rate.

M&L straight through joints (epoxy) cable joint kit, heat shrinkable, including jointing materials for making joints of UG electric cable 1100 volt grade heavy duty with PVC/XLPE insulated aluminium conductor nominal cross sectional area 16 to 35 Sqmm 3.5/4.0 core and testing complete all as specified and directed.

S&F MCB distribution board (DB) with sheet metal encloser, double door, IP 43 protection, 240 volts, 12 way, single pole and neutral, with 200 Amps rated busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed.

S & F in repair junction box made from SMC/FRP sheet ready made of size Junction box of size 140 X 14 X 95mm with aluminium bus bar of 50 Amp capacity for RYB and half for neutral made in suitable size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet ,MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete , entire assembly fixed to pole/wall with MS clamp 15 X 3mm and nuts & bolts and connecting cables from junction box to fittings, complete all as specified and directed.

S&F MCCB 415 V, 4 pole, 63 Amps, 16 KA, with thermal magnetic protection unit, complete all as specified and as directed.

S&F MCCB 415 V, 4 pole, 100 Amps, 16 KA, with thermal magnetic protection unit, complete all as specified and as directed.

S&F MCCB 415 V, 4 pole, 125 Amps, 16 KA, with thermal magnetic protection unit, complete all as specified and as directed.

S&F MCCB 415 V, 4 pole, 160 Amps, 25 KA, with thermal magnetic protection unit, complete all as specified and as directed.

M & L for road cutting/removing the hard standing/cutting plinth protection of building/path for laying of pipe line of any size including making good disturbed surfaces after laying of cable, as per existing, complete all as specified and directed.

S&F CPVC pipe of size 75mm bore in trenches, high pressure, CPVC pipes schedule 40 pipes and plain CPVC schedule 80 fittings including all necessay fittings, like elbow, tee, socket , reducer, bushings, step over bends, end caps, end plugs, etc and with CPVC solvents cement including taking down old unserviceble GI pipes pipes, complete all as specified and directed.

S&F CPVC pipe of size 50mm dia in trenches, high pressure, CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like elbow, tee, socket, reducer, bushings, step over bends, end caps, end plugs, etc and with CPVC solvents cement including taking down old unserviceble GI pipes, complete all as specified and directed.

S&F CPVC pipe of size 25mm dia in trenches high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, like elbow, tee, socket, reducer, bushings, step over bends, end caps, end plugs, etc and with CPVC solvents cement including taking down old unserviceble GI pipes, complete all as specified and directed.

S&F 25mm bore water tubing and connection, medium grade, including all fittings, fixed complete to wall and ceiling or laid in floor etc. including taking up or down old unserviceable GI tubing, complete all as specified and directed.

M&L for PCC (1:4:8) type D- 2, (using 40mm graded crushed stone aggregate) as in hard standing/plinth protection, floor etc., complete all as specified and directed.

Cutting existing steel tubing of size 40/50mm for alterations or additions (each cut measured), complete all as specified and directed.

M&L for screwing existing steel tubing of size 40/50mm for alterations or additions (or lengthening screw on pipe to form connector), complete all as specified and directed.

S&F 50mm bore gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of dia 50mm including taking down old unserviceble gate valves, complete all as specified and directed.

S&F 40mm bore gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of dia 40mm including taking down old unserviceble gate valves, complete all as specified and directed.

S&F 32mm bore gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of dia 32mm including taking down old unserviceble gate valves, complete all as specified and directed.

S&F 25mm bore gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of dia 25mm including taking down old unserviceble gate valves, complete all as specified and directed.

S&F 20mm bore gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of dia 20mm including taking down old unserviceble gate valves, complete all as specified and directed.

S&F in repair CPVC ball Valve of size 50mm dia suitable for CPVC pipe including necessary fittings, complete all as specified and directed.

S&F in repair CPVC ball Valve of size 25mm dia suitable for CPVC pipe including necessary fittings, complete all as specified and directed.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paint complete for base support frame for water tanks at roof top/ground floor including dismantling of old unserviceable cross arm of any description, complete all as specified and directed.

Taking up or down 25/32mm bore steel water tubing and connection including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Re-fixing old steel tubing and connection 25/32mm bore in new or old position complete on wall/ceiling or laying in floor etc,. with new fittings, complete all as specified and directed. Note: (i) Serviceable steel tubing obtained from taking down shall be re-used.) (ii) Screwing (threading) if required shall deemed to be included in unit quoted rate.

Note: An amount of Rs.69,281.00 on account of Credit Schedule for schedule 'A' part-II shall be deducted from the total amount of BOQ to arrive at the contract sum.

CONSTRUCTION SHELTER

BHARAT ELECTRIC

M/S BISHAL ENTERPRISES

M/S SARDAR MAL NAHATA

M/S RATHIN ENTERPRISES

M/S. KUMAR CONSTRUCTION CO.

M/S. NARENDRA KUMAR GARG