REPAIRS/MAINTENANCE TO SEWAGE LINE/SEWAGE SYSTEM, SANITARY FITTINGS AND ALLIED WORKS OF ZONE-I AND REPAIRS TO FOOTPATH, HARDSTANDING, CHAIN LINK FENCING AND DRAIN AT ZONE -I OF AGE B/R-II UNDER GE (FW) KOLKATA

Amount

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, all as specified and as directed by the Engineer-in-Charge.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

All as per item No 5 here in before but 150 mm dia with cement mortar joint.

Demolition and breaking up 150mm bore drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up 200mm bore drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up 300mm bore drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Excavation in trenches n exc 1.5 M wide and n exc 1.5 M in depth for foundation etc for shafts,pier holes etc n exc 10 Sqm on plan and n exc 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed.

-do- all as per item No 10 above but depth exc 1.5M and n exc 3M deep.

Returning, filling in, incl spreading, levelling, watering & well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed.

Removal of excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Excavating in post hole (or similar hole) each n exc 0.5 cum getting out, returing, filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 M and making good surface in soft and loose soil complete all as specified and directed.

M & L cement concrete in foundation filling and mass concrete, type C2 (1:3:6) using 40 mm graded stone aggregates complete all as specified and directed.

M & L brick work with sub class 'B' fly-ash bricks, straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

Cutting of road for taking out & repais of pipes and repair to disturbed road with PCC (1:2:4) type B2 (using 40 mm graded stone aggregates), 100 mm thick, laid over 150 mm hard core of broken stones of gauge n exc 63 mm over rammed earth etc complete all as specified and directed.

M&L Pre-cast Reinforced Cement Concrete type B1(1:2:4) using 20 mm graded crushed stone aggregate) by volumetric mix as in Cover Slab of drain, Man Holes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed. (Note : Reinforcement to be measured and paid separately).

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

S & F cast iron work Gd FG-150 unmachined as in brackets,gratings,gully traps, manhole covers etc in articles exc exceeding 5 Kg each complete all as specified and directed.

-do- but n exc 5 Kg

M & L concrete bed to drain pipes 150 mm bore incl packing under and haunching against the sides of pipes after they are laid and tested in cement conc type C2(1:3:6) mix using 40 mm graded stone agg for 150 mm bore of pipe complete all as specified and directed.

Supply, laying, jointing & testing 150 mm internal dia salt glazed stone ware drain pipes laid in trenches and jointed as specified in SSR complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) with joints to match complete all as specified and as directed.

Cutting 150 mm bore pipe in position and blocking up end with cement concrete (1:2:4) type B1 using 20 mm graded stone aggregates for a depth of at least 30 cm from the cut made complete all as specified and directed.

Cutting into exting manholes for connecting new drains, making good to pipe and rendering, cutting out extg benching for and forming branch channel (1/2 round or 3/4 section) in cement conc 1:2:4 type B1 smooth finished and reforming benching as reqd 150 mm bore pipe complete all as specified and directed.

S & F in repair cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed.

M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed.

Cleaning of gully trap of any depth (not exceeding 0.50 metre each), by taking out accumulated garbage, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the gully trap with water complete as directed by the Engineer-in-Charge.

Cleaning of floor trap (of any type/size), by taking out accumulated silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the floor trap with water complete as directed by the Engineer-in-Charge.

Cleaning of manhole of depth not exceeding 1.00 metre each, by taking out accumulated sludge, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the manhole with water complete as directed by the Engineer-in-Charge.

All as per item No. 32 here in before but depth of manhole exc 1 Mtr but n exc 3 Mtr -do- complete.

Cleaning of sewage line of 150mm bore either manually (by pushing a piece of bamboo split, tied with gunny bags at one end from one manhole to another manhole) or by mechanically operated pump including dewatering, desilting and well flushing the line with water and testing on completion complete as directed by the Engineer-in-Charge.

Cleaning of sewage line of 200mm bore either manually (by pushing a piece of bamboo split, tied with gunny bags at one end from one manhole to another manhole) or by mechanically operated pump including dewatering, desilting and well flushing the line with water and testing on completion complete as directed by the Engineer-in-Charge.

Cleaning of sewage line of 300mm bore either manually (by pushing a piece of bamboo split, tied with gunny bags at one end from one manhole to another manhole) or by mechanically operated pump including dewatering, desilting and well flushing the line with water and testing on completion complete as directed by the Engineer-in-Charge.

Cleaning of blocked water closet (of any type/pattern) including connected CI pipe line (of any bore) upto 1st manhole as directed by the Engineer-in-Charge.

De-sludging / cleaning completely of liquid / sticky / hard sludge by pumping manually from inside of septic tank (25 users) and removal of sludge to a distance not exceeding 50 meter and depositing to excavated pit of appropriate size as and when required (all as drected) and filled up with earth ( not exceeding 30 cm thick in each layer), and spreading of bleaching powder all as specified and as directed by the Engineer-in-Charge. Notes : (I) Earth to be filled over the pit shall be spread after sufficient absorption of liquid / sticky / hard sludge, and size of pit shall be made accordingly. (II) To avoid any health hazard or spreading of any foul gas, sufficient quantity of bleaching powder shall be spread as directed by the Engineer-in-Charge. Cost of spreading bleaching powder and excavating the earth pit and subsequent filling of earth etc shall be included in the quoted rate against the item).

S & F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed.

All as per item No 39 here in before but 150mm bore

All as per item No 39 here in before but 100mm bore fixed to wall

S & F CI bend 100 mm bore with oval access door complete all as specified and directed.

S & F plain bend 100 mm bore complete all as specified and directed.

S & F CI branch piece single (equal or unequal) for 100 mm bore pipe complete all as specified and directed.

S & F 100 mm bore cast iron rain water socket pipes with cement joints without ears complete all as specified and directed.

S & F 100 mm bore CI rain water bends or elbow square complete all as specified and directed.

M & L for half brick with sub class 'B' fly-ash bricks straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)

S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. (Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION or equivalent model in JAQUAR)

S&F in repair Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) incl providing and fixed plugs, bedding urinal against wall in cement mortar 1:2 and securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement including 32mm CP bottle trap, CP connecting pipe and CP urinal spreader including taking down existing urinal complete all as specified and directed. (Make of Urinal : Parryware Cat No: C-0575/ Jaquar, Cat No: URS-WHT-13261 / CERA, Cat No: S4020102 / HINDWARE, Cat No: 60030) (Make of Bottle Trap: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C or equivalent model in PARRYWARE/PRAYAG/ HINDWARE). (Make of Urinal Spreader : CERA, Cat No: F8070201 / PRAYAG, Cat No: BEA-25 or equivalent model in PARRYWARE / HINDWARE / JAQUAR)

Supply and Fix in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY)

S&F in repair floor mounted vitreous china, coloured wash down water closet pan (pedestal pattern) with "P" or "S" trap, front or back inlet fixing bolts with and including 10 litre capacity syphonic action type low level PVC flushing cistern matching with water closet colour with inlet ball valve float handle fixed with cast iron bracket of suitable size) and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cove (coloured) fixed with mild steel chromium plated or aluminium hinging device, in proper position including making all necessary connections with flushing cistern, flush pipe, anti syphonage pipe etc complete. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK) (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

S & F in repair 450mm dia 50mm thick RCPC man hole cover with frame of 540mm dia, 100mm thick of 3MT capacity fixed in proper position incl taking out existing cover complete all as specified and directed.

All as per item No 53 above but for 5 MT capacity

S&F in repair RCPC slab of size 600 x 440 x 100 mm thick of capacity exc 5 MT, incl taking out existing cover complete all as specified and directed.

S&F in repair precast reinforced cement concrete RCPC drain cover 100 mm thick of size 900mm x 600 mm as in drain cover with capcity 3MT, incl taking out existing cover complete all as specified and directed.

S&F in repair precast reinforced cement concrete RCPC drain cover 100 mm thick of size 600mm x 450 mm as in drain cover with capcity 3MT, incl taking out existing cover complete all as specified and directed.

Supply, laying, jointing and testing 150mm bore RCC pipes class NP2 laid & jointed complete all as specified and directed.

Supply, laying, jointing and testing 200 mm bore RCC pipes class NP2 laid & jointed complete all as specified and directed.

Supply, laying, jointing and testing 300 mm bore RCC pipes class NP2 laid & jointed complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC bends complete all as specified and directed.

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

Supply and fixing cast iron (sand cast) I-Cover, complete all as specified and directed.

Supply and fixing 100 mm bore cast iron (sand cast) Cowl, complete all as specified and directed.

S&F 15mm bore heavy duty PVC connector pipe of length 600mm with PTMT coupling at both ends, screwed down for pipe as directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D/SHAKTI, Cat No: SB 1324-D)

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

M&L Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.06Sqm but n. exc 0.11 sqm (300X300X7-8mm), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bedding in cement mortar 1:6 complete all as a specified and as directed

M&L coloured glazed ceramic tiles in vertical surfaces 450X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F 45mm thick precast cement concrete Type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement mortar 1:4 as in repair, complete all as specified and as directed.

M&L for use and waste for form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers , shelves including supports , overhangs etc also splays between floors and beams for rough finished surfaces of concrete flat complete all as specified and directed

M & L for RCC 1:2:4, type B1 (nominal mix) (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground post embedded in concrete, complete all as specified and as directed.

Dismantling of fencing, wire mesh any type complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and rivets welded etc framed guard bars barrel iron door ladder framed balusters walk ways,railing, conforming to Fe-290, Gde-E-165,including, complete all as specified and as directed.

M&L MS angle, flats, etc independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250)quality A as in fencing posts including drilling holes for nuts and bolts and similar work complete all as specified and as directed.

Fixing only RCC post or angle iron post (obtained from item No 73 here-in-before) complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) 5mm to 10mm diameter of neck and length of bolt exc 5 Cm and not exc. 10 Cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.

S & F MS 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length, bend to shape required,complete all as specified and as directed

M&L applying one coat of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface.

M&L Preparing old Steel Surfaces of any description not otherwise described over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint, complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

Supply and fixing in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc. incl taking down existing fencing complete all as specified and directed. (Note: - Each line of wire will be measured)

Supply only chain link fencing made out of 3.15 mm dia galvanised iron wire, of mesh size 75 mm x 75 mm, made upto into mattress or cages, complete all as specified and as directed. NOTE: Weight of chain link fence shall be verified through a BOO.

Straining and fixing only chain link fencing to MS Posts including provision of 10 mm dia MS bar as line wire welded to fencing post and MS flat iron, complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

S&F 3mm dia PVC coated galvanised mild steel chain link fencing of mesh size 75x75mm fixed with straining bolts including line wire any mesh size and type to any type of standards, rails, straining bolts etc.including provision of binding wire, complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

Refixing of old serviceable chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

Supply and fixing in repairs concertina coil (reinforced punched barbed tape single layer) for fencing work incl taking down existing coils complete all as per following specifications :- (i) Diameter of concertina coil - 600 mm dia (ii) Number of turns in concertina - 50 to 53 turns (iii) Weight of each coil - 9.5 to 10 KG (iv) Coverage per coil - 6 m (v) Central core wire - made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanised (conforming to IS-2629) with diameter 2.59 mm + 0.05 mm, UTS 145-160 kg/sqmm, zinc coating 250-300 grams/sqm (vi) Strip - Electro galvanised steel strip 0.5 mm + 0.02 mm thick, width 19 mm (before wrapping on central core wire) conforming to IS-1573, zinc coating - 120 gram/sqm and bituminised dipped, width of barbs 11.5 mm, pitch of barbs 25.4 mm+ 0.2 mm (vii) Clips - AISI 304-1.5 mm thick 'C' & 'U' clips. 'C' special type for fixing coil and RBT wire, 'U' clips special type for joining one coil to another coil and RBT wire to RBT wire joining. (viii) No. of clips - 125 for each coil (ix) Handle and spikes to be provided as required (NOTE : 1. The concertina coil shall be given additional primer treatment of epoxy/polyurethane and final paint top coat of caufiled green shade (BSL 139) by hot dipping process. 2. Running length of the wall shall be measured for payment purpose).

M&L for 75 mm thick PCC 1:3:6 type C-2, using 40mm graded stone aggregates, finished even and fair complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B2, using 40mm graded stone aggregates, finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing PCC (1:3:6) type C-2, using 40 mm graded stone aggregate, as in surface channels and drains including necessary from work complete all as specified and as directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed

Add or deduct for 25mm girth or part there of over or under 30cm girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc. complete all as specified and directed

M&L Plain Cement Concrete 1:2:4, type B-1(20mm graded crushed stone aggregate) as in roof, kerbs or mud stops, round and chamfered on edge, including providing necessary form work complete all as specified and as directed.

M&L for reinforced concrete hume pipe class NP-2 laid & jointed complete with collar bore of pipe 450mm complete all as specified and as directed.

M&L for concrete bed to drain pipes incl packing under and haunching against the sides of pipe after they and laid tested in cement concrete 1:4:8 type D-2 (bore of pipe 450mm) complete all as specified and as directed.

Taking down cement or cement or cement lime plaster on brick or stone walls, etc. including raking out joints, haking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L 5 mm thick rendering in cement mortar (1:3) to brick or concrete celling surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick rendering in cement mortar (1:6) to brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick rendering in cement mortar (1:4) to brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M & L 15 mm thick plastering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces finished even & smooth with using extra cement complete all as specified and directed.

Demolition of stone/concrete slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed by Engineer-in-charge.

Supply and fixing 20mm thick pre-polished decorative cement concrete tiles of size 300mmx300mm, as in flooring, laid over and including 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, complete all as specifed and directed by Engineer-in-charge.

M&L 25 mm thick pre-polished coloured chequered tiles of size 400X400 jointed and pointed in neat cement slurry with white or coloured to match, laid over and including 20 mm thick screed bed in cement mortar 1:6 complete allas specified and directed.

S&F 15mm thick pre-polished decorative cement concrete tree gaurd tiles of approved size, design and colour laid on vertical surfaces over 15mm thick backing layer in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with admixture of pigment to match the shade complete all as specified and as directed.

Taking out precast interlocking paver block, any size, and keeping aside for re-use or removal from site complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and as directed. (NOTE: Sand cushioning shall be measured and paid seperately)

M&L Sand filling under floors under paver block including watering and consolidation complete all as specified and as directed

Relaying paver block in patches, including removing and cleaning old paver block, preparing beds and laying or setting, jointing new or old paver blocks complete all as specified and as directed. (NOTE: Sand cushioning, if required shall be measured and paid seperately)

Material and labour for grinding/polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazo, granite and similar surfaces etc) cleaning with water and applying zinc oxide powder complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made up of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing, laid over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed.

JOY-EN-JOY

MS JYOTI INDUSTRIES

JOY RAM ENTERPRISE

ARATI TRADING CO

M/S BISWANATH BHATTACHARJEE