Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.5 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹47.9 L+₹27,805.84 (0.58%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest. | |
| 3 | L3₹50.7 L+₹3.1 L (6.50%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest. | |
| 4 | L4₹51.1 L+₹3.5 L (7.35%)Rejected-Finance 1 204 LOWER GROUND FLOOR SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L4 | Rejected-Finance Being other than lowest. | |
| 5 | L5₹52.5 L+₹4.9 L (10.3%)Rejected-Finance C 9 53 IIND FLOOR SECTOR 08 ROHINI DELHI 110085 | DELHI | NORTH WEST DELHI | DELHI | 110085 | L5 | Rejected-Finance Being other than lowest. |
Tender Value
₹47.4 L
EMD Value
₹94,880
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
SPL REPAIR TO GIRL BLOCK, BLDG NO P-1 AND P-2 (BOYS BLOCK), DINING HALL, ENTRY ROOM, STORE AND OFFICE AT YEP AREA AT DGNCC CAMP IN THE AREA OF AGE B/R-III UNDER GE (EAST) DELHI CANTT-10
2022_MES_562910_1
GE/DE-34/2022-23
Open Tender
Civil Works
Item Rate
120 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹94,880
Yes
22 Dec 2022
14 Nov 2022
7 Dec 2022
14 Nov 2022
5 Dec 2022
28 Nov 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 8mm thick tinted/frosted glass. (Note: The unit rate quoted by contractor include cost of glass and all other connected accessories. Net opening will be measured for payment purpose.)
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note: The unit rate quoted by contractor include cost of wiremesh and all other connected accessories. Net opening will be measured for payment purpose.)
M & L for Vitrified ceramic tiles light shade 10mm thick, square/rectangular polished (with pattern and boarder work as required at site), area of tiles exceeding 0.42Sqm and not exceeding 1.0Sqm each tiles as in flooring over and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement including dismantling of old tiles with cement mortar bedding but not backing complete all as specified and as directed.
M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tile exc 0.42 Sqm but n exc 1.00 Sqm as in skirting/dados on vertical surfae of walls etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with cement mortar bedding but not backing complete all as specified and as directed.
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
Taking down cement or cement lime plaster , any description on brick or stone walls or from ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified.
M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed.
M& L for screed bed 15mm thick on top of cleaned concrete surfaces in cement mortar 1:4 mixed with water proofing compound, including taking down existing roof treatment of any type and also cement plaster on concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid separately under respective item).
Supply only water proofing compound, to be mixed in cement mortar or concrete as per proportion specified by manufacturer, complete all as specified and as directed.
Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
M & L 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including demolition of existing granite complete all as specified and as directed .
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of chalk whitening putty complete all as specified and directed.
Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete.
M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.
M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.
M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M & L for RCC M25 Nominal Mix using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed.
S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 including dismantling of existing steel work of any type complete all as specified and directed
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F in repair 15mm bore Angle valve of CP high pressure screwed for iron pipe and fixed, (Make: Jaquar/Marc/Kohler)
S & F in repairs Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)
S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repair 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.
S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.
S & F in repairs CP shower rose fancy type 150mm x 150mm size with 600mm long shower arm fixed to 15mm bore pipe, complete all as specified and as directed.
S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).
S & F in repairs Vitreous chinaware table top wash hand basin (WHB) of size 595mm x 440mm x 185mm complete including 32 mm dia chromium plated waste coupling, complete all as specified and as directed. (Make : Jaquar Cat Part No. KUS-WHT-35901 or equivalent in Somany/Cera/Hindware).
S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections & fittings and removing from site complete all as specified.
Taking up or down 20mm bore steel tubing and connections & fittings and removing from site complete all as specified.
S &F 20 mm bore tubes medium grade galvanised with all fitting and fixed complete to wall and ceilings or laid in floor.
S&F 15mm bore tubes medium grade galvanised with all fitting and fixed complete to wall and ceilings or laid in floor.
S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F 3mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads.
S & F in repairs 100mm bore sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.
S & F in repairs 100mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.
S & F in repairs 100mm bore Cast iro Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S & F in repairs 100mm bore cast iron cowls complete all as specified and as directed.
S & F in repairs 100mm bore Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S&F in repair Stainless steel Curtain Rod 20 mm dia with fancy type holders fixed to wall etc, complete all as specified and as directed.
Stainless steel fancy type bracket with new screws for curtain rod, complete all as specified and as directed.
S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors including taking down eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings,heads,shoes, bends, swan-necks, stack clamps etc. complete all as specified and directed.
S & F in repairs 110mm bore PVC (SWR) bends any radius complete.
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position.
M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid dry in floor/path incl demolition of existing flooring or tiles of any type of any size complete all as specified and as directed.
Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.
Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.
Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.
M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.
Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.
M & L for 300 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.
M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 300 mm bore incl forming cradles complte all as specified and directed.
S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement.
M & L two coat of synthetic enamel paint over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.
M & L for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and as directed.
M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 1mm thick wall care putty over new surfaces complete all as specified and as directed.
M & L Preparation of newly plastered /unplastered surfaces of walls and ceilings, applying 1mm thick Birla White/J K White wall care putty, again sand papering thus making surface good and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.
M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying two coats of Oil bound distemper including 2-3mm thick wall care putty JK or Birla complete all as specified and directed.
M & L for preparation of Old plaster external wall and ceiling surfaces by completely removal of existing painting surfaces, filling the cracks, holes with POP/Putty and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied 2-3mm thick wall care putty in two layers complete all as specified and as directed.
M & L for vetrified light shade tiles of size 600 x 600 x10mm thick as in floor over 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
S & F 2-3mm thick fibre glass reinforced translucent Plain/corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of of existing sheeting of any type complete all as specified and directed.
S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed. (Note : The electrical fittings and fixtures shall be taking down and re-fixing the same with out any damage deemed to include in the item)
S & F painted galvalume aluminum zinc coating GI based corrugated steel (Curvical shape) sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement, complete all as specified and as directed.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including a mix of water proofing compound @ 100ml/50Kg Cement Bag complete all as specified and as directed. (Make Of Water proofing Compoung: Smartcare vitalia of Asian Paint or equivalent of Berger and Nerolac) (Note : Cost of water proofing compound shall deemed to include in the quoted rate).
M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including a mix of water proofing compound @ 100ml/50Kg Cement Bag complete all as specified and as directed. (Make Of Water proofing Compoung: Smartcare vitalia of Asian Paint or equivalent of Berger and Nerolac) (Note : Cost of water proofing compound shall deemed to include in the quoted rate).
M & L for application of acrylic polymer-modified cementitious high performance coating on brick surfaces in two layers @ 1.5kg/Sqm complete all as specified and as directed. Make: Smartcare Damp Block 2K of Asian Paints or equivalent of Berger and Nerolac (Note: The rate includes for preparation of surface, Mixing of material, Apllication and curing as per manufacturer instruction)
M & L for preparation of New surfaces of wall/ceiling and apply 2 coats of Exterior Acrylic Emulsion Paint (coverage area 6.5-7.5 Sqm/Ltr for two coats), over a coat of 1.5-2mm wall care putty over a coat of alkali resistent primer (coverage area 14-17 Sqm/Ltr for one coat) complete all as specified and as directed. Make: Asian- Primer (TruCare Exterior Wall Primer Sealer), Wall care putty-TruCare Wall Putty), Exterior Emulsion Paint- Apex Or Equivalent in Berger or Nerolac
M & L for preparation of New plastered or un-plastered surfaces of wall and applying 2 coats of Internal acrylic paint of Dr. Fixit Sureseal or equivalent of Asian Paints or Berger over 2-3mm wall care putty and coat of primer complete all as specified and as directed.
M & L for preparation of Old plastered or un-plastered surfaces of wall duly brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss, efflorescent, salts and trading oil & greasy spots and applying 2 coats of Internal acrylic paint of Dr. Fixit Sureseal or equivalent of Asian Paints or Berger over 2-3mm wall care putty and coat of primer complete all as specified and as directed.
Taking down carefully old unserviceable copper/aluminium point wiring from conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.
M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked through PVC concealed conduit medium grade including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl new suitable sizes metal flush box and cover plate for fixing modular switches/sockets/fan regulator etc, and making good surface as original complete all as directed for the following:-
One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.
One socket outlet point 5 amps on the same board.
One socket outlet point 5 amps on the independent board.
One light point controlled by two way switch.
All as per srl item No 99 here-in-before but with 2.5 Sqmm FRLS copper wire with 2.50 Sqmm FRLS copper earth wire.
S&F of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.
S&F of Modular switch 6 Amp, 2 way, 1 module size complete all as directed.
S&F of Modular socket 16 Amp 1 way 1 module, size complete all as directed.
S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed.
S&F of Modular socket 6/16 Amp, multipurpose, 2 module size complete all as directed.
S&F of step type Fan regulator , 120 watts, piano flush type complete all as directed.
S&F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.
S&F in Replacement of Modular AC Socket with 25 Amp SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.
Material and labour in replacement for Sub main wiring with 2 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to PVC conduit with and including 4 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified.
Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.
Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.
Supply and fixing in replacement of isolator 63 Amp, SPN type with over load and short circuit protection complete all as directed.
Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.
Supply and fixing in replacement of LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.
Supply and fixing LED ceiling/Recess light fitting 10 watt, in round shape, surface type and making all electric connections complete all as directed.
S&F in replacement ventilatiing fan 200mm sweep 230 volt AC with & including louvers and all fixing arrangements complete depositing old unserviceable to DGNCC store yard all as specified & directed.
S&F of Geyser 25 litre capacity vertical type with steel tank and glass inner linen complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet water connection upto stop cock (excluding stop cock) complete all as specifed and as directed and depositing all unsv items to DGNCC store yard.
S&F in repair PVC (SWR) Floor/Nahani trap, plin dia of outlet 110mm complete all as directed.
RAMGARHIA CONSTRUCTION CO
M/S Davinder Kumar
LAXMI GROUP
L G BUILDERS
garnet engineers contractors
Simran construction Company
SACHDEVA ENGINEERING WORKS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .