REPAIR TO ROAD AT MAHAR AND FD HOSPITAL ASC BN AND ENGR REGT IN AGE BR I UNDER GE DIPATOLI

Amount

Scarifying or picking gravelled, macadam or bituminous macadam exc 50 mm and n exc 100 mm deep, surface in area exc 400 sqm including removing the rubbish away from site to a distance not exc 50m complete all as specified.

Screening road metal, chippings, etc. on the site of work, when specifically ordered , including removing screened materials clear of screen and stacking in separate heaps for measuring ( Materials from both sides of screen measured) complete all as specified and directed.

M&L 75mm thick ( compacted thickness) Water Bound Maccadam (WBM) with Granite, trap or Basalt , coarse aggregate of grading 2 (63 to 40 mm size) or grading 3 ( 50 mm to 20 mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

Description all as per item No 3 above but except materials and ditto

M&L Premix bituminous, macadam, laid/ rolled and compacted to required gradient and camber ( consolidated) thickness 75 mm or less using paving bitumen of grade VG-30 as binder @ 4% by weight of total mix using mechanical paver and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as specified and as directed. Note :- Mixing shall be done in hot mix plants

Preparing unsurfaced water bound macadam top surfces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with compressed air to remove all loose dirt etc.and then applying evenly a tack coat with VG-10 grade bituminous primer at 10Kg/10 Sqm all as specified and as directed.

M&L of preparation of existing black top surfaces by wire brushing for removing caked mud etc and sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all dirt and applying a priming coat of bitumen primer @ 5 kg/10 sqm of VG-10 grade bitumen complete all as specified. (Note: Rate included for removing grass,vegitation/scum on black top surfacee grass, root & vegetation/scum complete to the entire satisfaction of Eng- in - Charge.

M&L Bituminous premix asphaltic semi-dense concrete 40mm thick consolidated thickness with 5.5% binder content (VG-30) by weight of total mix rolled and compacted to required camber and gradient with vibrator roller and / or 8 to 10 tonne static road roller complete all as specified and directed. Note :- Mixing shall be done in hot mix plants

M&L Repair to pot holes any depth , not exc 1 sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm , putting in premix as specified for thin bituminous carpet ( 2 cm thick) , well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand), again well rammed ( including supply of premix , binder and sand), depth of potholes n exc 30 mm complete all as specified and directed.

M&L for laying hot applied thermoplastic reflective compound (paint) 2.5 mm thick single coat as in centre line and edge line road marking in white / golden yellow colour as approved colours & shade of 150mm / 100mm width using 'HOT MARK' thermoplastic modern propolled road marking machine including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate inter fillers thermoplastic requirement for glass beads as per table No 800.4 of MOST specifications including spraying glass beads etc as per manufacturere's instruction complete all as specified and directed.

S&F in repair solar Road Studs (Cats Eye), aluminium alloy shell die cast, 100% water proof design according to IP-65, of size125mmx125mm x 20mm (shank 60mm), high efficiency Mono crystalline solar panel 2.4 V / 0.3 watt including one Ni-Mh or Ni-cd rechargeable battery of 1.2 V / 1600 MA and 06 super bright LEDs 10000 to 18000 mcd, dynamically designed with very high impact strength and fitted with 3 panels of glass beads containing highly reflective glass beads and reflector element on two sides and fixed over road surfacesby embedding epoxy adhesive, minimum co-efficient of retro reflective sheeting for high intensity grade of 22000 series (colour as approved by GE) suitable for bearable weight of approx 10 tonnes complete all as spd and directed. Make : M/S Birla 3M / Dark Eye Model No DHRUV (DA-110) or other equilents as approved by the GE.

S&F in repair Road Studs (Cat Eye), aluminium alloy die casted, 100mmx100mm dynamically designed with very high impact strength and fitted with 3 panels of glass beads containing 7 highly reflective glass beads and reflector element on two sides and fixed over road surfaces, minimum co-efficient of retro reflective sheeting for high intensity grade of 22000 series (colour as approved by GE) complete all as spd and directed.

S&F in repair delineators ABS round body struts (minimum weight 765 gms), red and white combinations, fitted with 02 Nos 100 mm dia high prismatic reflector circle at top covered with wire mesh of 20cm length and mounted on MS pipe of 50 mm dia 750 mm long duly powder coated and rust proof incl firmly fixing of delineator on ground with PCC (1:2:4) type B1 of size 20cmx20cmx15cm including necessary excavation and earth work complete all as specified and directed. Make :- Dark EYE model No SKU DA--952-GP / M/s Birla or other equilent make as approved by the GE.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premices complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) in foundation , sub base, filling and mass concrete complete all as specified and directed.

M&L machine pressed precast concrete coloured inter locking paver block, rubber moulded casting with glossy finish , any shape & size as approved, confirming to IS 15658-2006 of 60 mm thickness, M-35 grade of concrete with grey cement & pigment laid dry over and including sand cushioning not less than 25 mm thick, interstices filled in floors/ pathway complete all as specified. complete all as specified.

M&L for Spreading & levelling of sand in layers not exc 25cm thick over sub base complete all as specified and as directed

M/S SURYA BUILDERS

Modernage Constructions Pvt. Ltd.