REPAIR/MAINT TO FLOORING, ROOFING, JOINERY AND CEILING INCL SANITARY FITTINGS TO BLDGS, CLEANING OF SEWAGE LINE MANHOLES, SEPTIC TANKS AND SOAK WELLS INCL CLEANING OF DRAIN AND MIS WORKS ETC OF SONAMARG (INCL HAWS) UNDER GE 970 EWS

Amount

Dismantling wall / ceiling boards of any description, fixed in any position with nails or screws, complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium snap grid frame work (Size of grid 605 x 605mm) for false ceiling all as specified

M & L 6mm thick Non asbestos fibre cement building boards (size of board 600x600mm) fixed or laid over anodised aluminium snap grid framework complete all as specified and directed

M & L 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed

Dismantling unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

M & L Second class hard hard in scantlings timber frame and fixed wrought finish complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any guage, thickness complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all specified and directed.

Taking down chowkat with shutter wood or aluminium (Without taking of shutter from frame) area exc 1.50 Sqm but nexc 4.00 Sqm each complete all a specified and directed.

S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all a specified and directed.

S&F 30mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side complete all a specified and directed.

S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F for Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F in repairs 4mm thick sheet glass ordinary quality and glazing with oil putty in square exc. 0.5 Sqm in each pane including hacking out of glass panes complete and all as specified and directed

Taking down chowkat with shutter (Without taking of shutter from frame) area not exceeding 1.50 Sqm complete all a specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all a specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side,all as directed by Engr-in charge.

M&L for two coat of synthetic enamel paint over one coat of pink primer to newly untreated wooden surface over 10cm width or girth incl preparation of surface all as directed

S&F 150 mm long aluminium tower bolt, complete and all as specified.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified

S&F MS 100 mm size butt hinges medium wt. of cold rolled complete and all as specified.

Aluminium handles, cast type anodised 100mm size complete all as specified

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises.

M & L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing, plinth protection finishing the surface even and smooth

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in leveling course, benching etc, finished even & rough to receive cement mortar screed bed complete

M & L light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors incl 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for Non skid ceramic joint free coloured tiles 400mmx 400mm x 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete.

Glazed ceramic tiles in vertical surface colour tiles 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10 mm thick backing or rendering in CM (1:4) complete all as specified.

Taking down cement plaster or brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water all as specified and directed

M&L 15mm thick rendering over other than fair faces of brick work or concrete sufaces in CM 1:4 including finishing even and smooth without using extra cement all as specified and directed

M&L preparation of plastered or uplastered new surfaces on walls and applying two coats cement base paint on walls , all as specified and directed

M&L for 15 mm thick rendering in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new surfaces on walls and applying two coats of oil bond distemper on walls over one coat of primer and 2mm th putty (JK Birla), complete all as specified and directed

Taking up or down steel tubing 15mm and connections, including cleaning for refixing or removal to store

Taking up or down steel tubing 20mm and connections, including cleaning for refixing or removal to store

M&L 16mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed.

M&L 20mm outer dia for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as pecified and directed.

Lagging to 20mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842

Dismantling water tanks exec 250 lts but not exe 500 ltra and removing to store

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked double layered, hoisted and fixed in position including connecting up pipes and vent pipe complete.

20mm Gun-metal, globe or gate valves, with iron wheelhead, screwed both ends for iron pipe and fixed complete.

20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm- 690 gms)

S & F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe , fixed in repair complete.

S&F Repair in Vitreous china wash basin, white, flat back, size 550 x 400 mm, including brackets and cutting for and pinning in ends of brackets, waste coupling, waste pipe, complete.

S&F Repair in PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed suitable for 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F for cast iron body hydraulically door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all a specified and directed.

S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one.

S & F in repairs 15mm Pillar taps, CP , with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and directed

M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of 10cm width or girth completed all as specified and directed.

M&L for preparation of old painted steel surface and applying one coat of synthetic enamel paint of 10cm width or girth completed all as specified and directed.

M&L preparation of old surfaces on walls and applying one coats of oil bond distemper complete all as specified and directed

M&L preparation of old surfaces on walls and applying one coats of cement base paint complete all as specified and directed

M&L for cleaning of SGSW / RCC / PVC sewage line upto 250mm dia by rodding / auger rods & drain pipe machine as required from manhole to manhole including gully trap and getting out the sludge from any size of manholes & gully traps before & after cleaning process of SGSW / RCC / PVC sewage line and well flushing using clean water through water bowser pipe of any capacity (arranged by the Contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance n. exc 250m with and including taking off manholes / gully trap covers and re-fixing the same after cleaning process complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 150.00 per RM for every day.

M&L for cleaning / taking off of sludge (solid / semi solid) of any state from manhole of any size including gully trap having depth upto 3.00m by using machinary or manually as required and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suatible size from habbatient area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance 250m with and includig taking off manholes / gully trap covers and re-fixing the same after cleaning process complete all as specifed and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 250.00 per Each Job for every day.

M&L for opening / cleaning of blocked WC of any type, traps and CI / PVC drain pipe including fittings (i.e. access door bends / tee etc) of any size at any floor & position with and including taking down of CI / CP / PVC grating and refixing the same at position with appropriate materials / fittings i.e. white cement, solvent, nuts & bolts etc and well flushing, pressure pumping, taking out all residue materials etc and removing the same to distance not exc 250 mtr, burried the same underground by digging pit of suatible size from habbatient area and covering same wrt the earth level including removal of surplus soil to a distance 250m, complete all as specified and directed by the Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 150.00 per Each Job for every day.

M&L for dewatering of contaminated waste effluent from septic tank, soakage well of any capacity by sewer jetting cum suction machine vehicle / honey sucker machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints within 48 hrs from receipt of compalints slip and completion report will be submitted to concerned JE / AGE before 48hrs as per complaint slip time. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 825.00 per Cum for every day.

M&L for cleaning of septic tank of any capacity and depth including inlet / outlet chamber after mixing of contaminated waste effluent and sludge etc of septic tank by mixing machine to change the state of solid / semi solid sludge to liquid state by using extra water provided by the Contractor if required and getting out through sewer jetting cum suction machine vehicle / Honey sucker machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints within 48 hrs from receipt of compalints slip and completion report will be submitted to concerned JE / AGE before 48hrs as per complaint slip time. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 1150.00 per Cum for every day.

M&L for excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft,wells,cesspits,manholes,sewage line,pier holes not exceeding 10 Sqm on plan and n. exc 1.5m in depth and getting out in any type of soil compete all as specified..

M&L PCC (1:3:6) type C2 in foundations, filling and mass concrete to sub base of manholes etc alongwith demolition complete all as specified

M&L for brick work in repairs with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 incl demolition of brick work in any mortar complete all as specified and directed.

M&L PCC (1:2:4) type B1 as in coping, benching to manholes incl necessary form work, complete all as specified.

M&L Rendering 10mm thick in CM (1:4) mixed with liquid WPC as per Manufactorer~s instruction to concrete surface finished even and smooth w/o using extra cement.

Returning, filling in soil, including spreading,levelling ,watering and well ramming in layers n.exc 25 cm thick each layer as in soil all as specified.

Removal of excavated incl material (Soil) to a distance n.exc 50M and depositing where directed at a level not exceeding 1.50M above the starting point.

Dismantling of cast iron, PVC, SWG Pipe or asbestos pipe set in any motrar in connections of any dia.

S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (110mm bore) all as specified.

S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (75mm bore) all as specified.

S&F PVC (SWR) bend 110mm dia any radius all as specified.

S&F PVC (SWR) bend 75mm dia any radius all as specified.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia all as specified

S&F PVC (SWR) junction single (single T) equal or unequal (75/ 110mm dia) all as specified.

S&F PVC (SWR) vent cowl 75mm dia all as specified.

Demolition of cement concrete ground floor unreinforced and paving n.exc 15cm thickness (below or above ground level) incl removal of out side MoD land all as specified and directed

Dismantling of stone slabs a laid in dry and tiles of any description or thickness in floors and incl removal of out side MoD land and all complete all as specified.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub bases, 75 mm thick finished even & rough to receive finishing layer, etc. complete.

M&L Chequered cement concrete tiles of Glossy finish of size 30cmx30cm and 25mm thick set jointed and pointed in neat cement slurry in floorswith grey cement and pigment including 15mm thick screed bed or beding layer in cement mortor 1:6 complete complete all as specified and directed by Engr-in-Charge.

M&L for 50mm thick sand cusion under layer of floor.

Material and labour for machine pressed precast concrete interlocking paver block any shape, colour , size and pattern as approved by GE conforming to IS 15658-2006 of 60 mm thick, M-35 Grade & glossy finish with coloured cement and pigment all in specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, truss, parlins, water tank staging, etc., complete, drilled and welding for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (FE 410W E-250 Quality A Grade) complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete sufaces in CM 1:4 including finishing even and smooth without using extra cement and by mixing WPC @ 3% of Cement Constant complete all as specified and directed. Note WPC used will be measured and paid separately.

Supply only water proofing compound, complete all as specified and directed.

M&L preparation of plastered or uplastered new surfaces on walls and applying two coats of oil bond distemper on walls over a coat of primer and over 3mm thick of wall putty all as specified and directed.

M&L preparation of plastered or uplastered new surfaces on walls and applying two coats cement base paint on walls ,all as specified and directed.

S & F for 5mm thick PVC sheet fillet of width 35mm for all paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing completed all as specified and directed.

S & F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement, PVC sheet fillet and fixing at site on PVC frame as per specifications and drawings completed all as specified and directed.

M/S RAFIQ AHMAD SOFI AND SONS (BID ID -3133123)

G N Constructions (BID ID -3140423)

PARVAIZ AHMAD WANI (BID ID -3132902)

M/S Thakur & Sons (BID ID -3140434)