Construction of Urban Police station building with development works at Vadalur in Cuddalore District.

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

b. 2 to 3 mt.

E0006) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0040) Supplying and filling in foundation and basement with filling crushed stone sand

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

F0026) Filling in foundation and basement and other similar works with Excavated earth

F0013) Supply and filling in foundation and basement with gravel

F0016) Supply and filling in foundation and basement with Stone dust

FL0115) Supplying and laying of Rubber molded hydraulic pressed Paver blocks following thick using stone dust with required design & color including cost, conveyance of paver block and labour charges for laying with proper slope and gradient etc. complete and as directed by departmental officer (The brand, quality & color should be got approved from the Executive Engineer before use) b.83mm thick Paver block

CSMP0002) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

CSMP0003) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

CSMP0004) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly

CS0037) supplying and fixing of precast cement concrete slab for cupboard/ward robes shelves, cover slab for chambers, baffle walls side slabs of boxing around windows and other similar works in standardised concrete mix M-20 grade in accordance with is: 456 - 2000 using crushed stone sand and 3 to 10mm thick hard broken stone jelly for the above rcc items of works excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position complying with relevant standard specifications etc., complete in the following floors (measurement will be taken including bearing in wall also). I. 20mm thick a) In Ground Floor

b) In First Floor

II. 40mm thick a. In Foundation & basement

C0065) Providing and Laying in position, standardised concrete mix M-20 grade in accordance with is: 456 - 2000 using 20 mm and downgraded hard broken stone jelly for all rcc works namely column, column footings, plinth beam, grade beam, raft beam, raft slab a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

C0020) Providing Rain water harvesting pit of 1.0m dia 0.60m depth and filling with CS sand and stone jelly of 40mm size and by augering 300mm dia bore pits to a required depth with stone jelly of 40mm size materials and perforated precast cover slab (M20) etc., all complete Providing Pit

C0020.a) Augering 30cm dia

CSMP0001) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag)

C0021) Providing Rain Water Harvesting well ring in circular shape of 90cm dia, 60cm depth (30cm depth 2 Nos) 50mm thickness using standardised concrete mix M20 grade using 20mm HBSJ including cost of steel fabrication, labour charges, cost of materials, moulding, curing and hire charges for tools and plants

BMP0010) Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floors a. In Ground floor

b) In First Floor

BMP0011) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement

BMP0012) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

BMP0013) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b) In Stilt / Ground Floor

c) In First Floor

BMP0014) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Stilt / Ground floor

b) In First Floor

FL0003) Supplying and fixing of 20mm thick Bituminous Expansion joint filler Pad

FLMP0001) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FLMP0004) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0010) Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) in cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0017) Supplying and laying of following colour Granite slabs (superfine polished with machine cut edges) of size 4'-0"x 2'-0" of 18 to 20 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 (One of cement and three of crushed stone sand) 20mm thick including Cost of Mortar Plasticizer (Liquid) at 200ml per bag a. Jet Black

FL0107) Supplying and fixing of PVC Trims/ Corners beading suitable colour in toilet wall cladding in all floors including cost of all materials, Labour charges for fixing in position, cutting the required size wherever necessary, finishing

FL0154) Providing water proofing treatment for the toilet sunken portion with epoxy coat as per the following specification: Surface Preparation: Cleaning and preparation of surface with the help of wire brush.

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

e) For Circular Column

PLMP0001) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0004) Plastering in CM 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

PLMP0005) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0032) Supplying and applying of full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0042) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

PA0027) Providing wooden (melamine) polish for new wood

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

JW0042) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

JW0044) Supply and fixing of UPVC Sliding Window (Two track)

JD0095) Supply & Fixing of WPC Decora Door set where the Door shall be extruded as a single core door with Lead-Free compound and the surface shall have Decora Design i.e, Non-porous Smooth Routing and 3D embossed wooden bark grains on one side. The complete door must be homogeneously made to avoid any disfigurement in the appearance. The door shall be of minimum 25mm Thick and be 550 KG/Cu.Mtr of density, i.e 1.28 KG per sq. Feet. And The solid door frame extruded with size 75MM x 50MM with minimum Density 800 Kgs / Cub. Mtr. The door must be hinged with minimum of 3 Nos of 5 Inch Hinges and the frame shall be fixed onto the wall with a minimum of 4 Nos. of 8MM x 100MM long Fastener Screw fitted with polymeric nylon sleeve. The Door shall have all ISI hardware including 3 Towerbolt in front & back together, 2 Handles in either side etc. all complete in all respects as directed by the departmental officers.

Supplying and fixing of best Indian Teak wood paneled door of Double leaves shutters in position using 2Nos of 75mmx37.5mm styles and 3 Nos. of 150x37.5mm rails (Top, Bottom and Lock rail) and 18.75mm thick planks for panels including cost and labour for fixing the Brass furniture fittings such as 4 nos of 6" door handle with brass screws, 8 nos of 5" Butt hinges, 4nos 6"x6" Tower bolt, 1no 10"x5/8" aldrop, 2nos Nylon bush and 2 nos door stopper of best approved quality shade etc., all complete and as directed by the departmental officers. a) Door size 1800 x2400 mm (Double leaves)

JD0059) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size b) 900 x 2100 mm

GR0001) Supplying and fixing Mild Steel grills as per the design approved

GR0056) manufacturing, supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304l grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. the vertical pipe has to be welded to the 100 x 100 x 6mm ms base plate encased in the base concrete. the rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc., all complete., complying with relevant standard specifications and as directed by the departmental officers.

JD0086) Supplying and fixing of Steel doors with MS flat (for lockup door) a) MS Door of Size 1000 X 2100mm

JV0014) Supplying and fixing of steel ventilator with lron bars & MS flat of size 50x10mm alround and the panel shall be provided with 12Nos. of MS square bars of size 20x20mm equally spaced and welding the same with the alround MS flat of 25 x 6mm and backed with the weld mesh of size 75 x 25mm x 10G and flying mesh of size 10 x 10mm of 10G and welded with alround MS flat including cost of hinges, welding charges a) MS Ventilator - 600mm x 600mm

b) MS Ventilator -900mm x 600mm

c) MS Ventilator - 1200mm x 600mm

d) MS Ventilator - 1200mm x 800mm

f) MS Ventilator -1350mm x 600mm

RE0005) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

JD0094)Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood as per IS 303-1989 (General) with IS 5539-1969 (for preservative treatment) and IS 848-1974 (for adhesives) with relevant IS specifications and its latest amendment for shutters. The all round frame made up of T.W. scantling of 75mmX37.50mm and the styles made up of T.W. scantlings of 75mm x 37.5mm and shutter middle Rail (Horizontal) made up of T.W. scantling of 150mm x 37.5mm, labour for fixing in position, cost of materials, Aluminium Furniture fittings such as 6 nos. of 3” of Aluminium butt hinges, 2 nos. of 4”x5/8” Aluminium Tower bolt, 2 nos of 4” ornamental Handle and brass screws, lock and key arrangements (leaver type) of best approved quality and also with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of primer of approved quality and shade, all complete & as directed by the departmental officers.

JD0099) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

FLMP0018) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

WS0004) Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) of approved brand (superior variety) with ISI Mark (marked with tank itself) with top lid with provisions of locking including necessary specials and fittings for storing potable water and manufactured with material which do not import any taste / odour / any toxic effect and not to contaminate etc. (c)1000 litres

MS0053) Supplying and fixing of C.I man hole cover with locking arrangements of approved quality and brand of size 0.6m x 0.6m (50Kg) as per standard specifications including cost of material, labour charges for fixing etc., all complete and as directed by the departmental officers.

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0276) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable UPVC specials / GM specials like Elbow, Tee reducers, Plug , unions, bend, coupler, nipple/ GM gate valve, check and wheel valve. a) 20mm ASTM D schedule 40 threaded PVC pipe with necessary UPVC specials

WS0007) Supplying, laying and fixing of the following Pipe of best approved quality for Hot water line fully concealed in walls including cost of pipes and specials, labour charges for laying, jointing, testing and redoing the dismantled portions with neat finish etc., all complete and as directed by the departmental officers. c. 20mm dia CPVC pipe

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

WS0258) Drilling of borewell including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand stone, shale, pebbles, boulders etc., By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud circulation method using rotary rig, fuel, labour, drilling, bentonite mud and water required for drilling at the site shown by the departmental officers including construction of mud pit (only Calyx drills are to be used). Drilling of borewell upto 76m depth

Drilling of borewell in above 77m to 106m

Drilling of borewell in above 107m to 136m

Drilling of borewell in above 137m to 166m

Drilling of borewell in above 167m to 210m

WS0200) Reaming from 140 / 150 mm dia pilot bore to 300 mm dia bore as directed by the departmental officers for following depth ending below ground level etc. complete complying with relevant standard specifications and as directed by the departmental officers. a) Upto 60 m depth ending below ground level

b) From 60 m depth and upto 90 m depth

c) From 90 m depth and upto 120 m depth

d) From 120 m depth and upto 150 m depth

e) From 150 m depth and upto 180 m depth

f) From 180 m depth and upto 210 m depth

WS0152) Supply and delivery of following dia PVC Heavy duty casing pipes (6Kg/cm2) without excise duty as per IS 12818/2010 of approved quality for bore wells with average wall thickness of 6.1mm and inter / outer threaded ends in standard length of 3m including transporting charges to site of work and all other taxes etc., all complete and as directed by the departmental officers (The pipes and specials quality and brand should be got approved by the EE before laying) 150mm dia Casing pipe

WS0149) Supply and delivery of 150mm dia of Ribbed screen PVC casing pipies (6Kg/cm2) without excise duty as per IS 12818/2010 of approved quality for bore wells with average wall thickness of 8.0mm and inter / outer threaded ends with slots in standard length of 1m to 8mm both in horizontal and vertical cutting including transporting charges to site of work and all other taxes

WS0150) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., a) 150mm dia casing pipes assembly

WS0191) Charges for developing the bore well with air compressor of 300 CFM capacity (Minimun 8 Hours) including cost of transportation, labour and fuel charges for compressor and as directed by the departmental officers and conducting yield test ' V' Notch Method etc.

WS0235) supply and delivery of required dia nylon rope of superior quality for submersible pumpset in borewell and as directed by the departmental officers (the quality of nylon rope should be got approved by the executive engineer before supply)

EL0349) Supply and delivery of 3 core 4 sq.mm flat type copper cable conforming to IS 694/1990, PVC insulated and sheathed cable for submersible motor etc., all complete and as directed by the departmental officers. (The materials should be got approved from the EE before use)

WS0011) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM-D-1785 of schedule 40 including cost of materials and labour charges for earth work excavation, laying, jointing and cost of conveyance charges with necessary specials etc., all complete and as directed by the departmental officers. (Below Ground level). a) 50 mm ASTM

WS0023) Supplying, laying, fixing and jointing the following UPVC pipes as per ASTM-D-1785 of schedule (Below Ground level) a) 50 mm PVC

WS0280) Supplying and fixing of following dia UPVC specials of best approved quality including cost of specials and labour charges for fixing etc., all complete and as directed by the departmental officers. WS0280.III.a) 50mm dia UPVC Union

WS0280.IV.a) 50 mm Dia-UPVC BEND

WS0280.I.a) 50 mm Dia-UPVC Elbow

50 mm Dia -UPVC Ball valve

WS0242) supplying of following dia cast iron adopter etc., all complete and as directed by the departmental officers. (the quality of the materials should be got approved from the executive engineer before use) b. 40 mm dia

WS0280.VI.a) 50 mm x 40 mm Dia UPVC reducer

WS0017) Supply and fixing of following GI pipes `B` class of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer ( The brand and quality of the GI pipe should be got approved from EE before use) b) 50mm dia GI pipe.

WS0018) Supply and fixing of following dia GI Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position. WS0018.II.f). 50mm dia GI Elbow

WS0018.VII.f). 50mm dia GI HEX NIPPLE

WS0018.I.f). 50mm dia GI Union

WS0018.XV.f) 50mm dia GM Non return valve

WS0018.VI.f). 50mm dia GI. Flange set

WS0018.VIII.a) 50mm x 40mm dia-GI REDUCER

WS0018.III.f) 50mm dia GI Bend

WS0018.IV.f) 50mm dia GI TEE

WS0018.V.f) 50mm dia GI COUPLING

WS0279) Supply and delivery of 3 HP - Openwell Submersible pumpset with ISI mark suitable for Openwell c. 50 lpm x 50 m

WS0265) Supplying and fixing of 3 HP three phase panel board D.O.L with two level guard and auto start

WS0162) Labour charges for the erection of three phase submersible pumpset in borewell / openwell Upto 5 HP b.3 HP

WS0268) Supply and fixing of borewell MS Clamp sets suitable for 150mm dia borewell etc., all complete and as directed by the departmental officers.

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm

SA0036) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

SAMP0006) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10

SAMP0004) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SAMP0005) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) (Other than ground floor)

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag)

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

SA0155) Supplying and fixing CP Two way bib cock with health faucet

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame and locking arrangements b) 600mm x 600mm

MS0002) Supplying and fixing of 20mm dia aluminium hanger rods

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

MS0008) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

EL0002) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041) Supplying and fixing 15 Amps 3 pin plug type socket with switch

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades with dimmer electronic regulator suitable for operation on 230 volts 50 HTZ single phase AC supply conforming to ISS No.374/79 and provided with insulation. (The brand should be got approved from the Executive Engineer before supply made). a) 48"" Electric fan 1200mm sweep

EL0085) Supplying and fixing of 225mm dia sweep AC exhaust fan of approved ISI quality

EL0070) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) a. 9 watts LED bulb

EL0070) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) b) 12 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0100) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED . b.30W LED Street Light Fitting with LED

e. 150W LED Street Light Fitting with LED.

EL0165) Supply and fixing of 63 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection and earth connection cost of all materials etc., all complete and as directed by the departmental officers.

EL0298) Supply and fixing of electro mechanically operated three phase earth leakage circuit breaker/residual current circuit breaker (ELCB/RCCB) combined with over load and short circuit protection having a rupturing capacity of 6 KA with 30 milliamps fixed setting sensitivity and rates for 25 A insuitable sheet steel enclosure conforming to IS 12640/1988. Including cost of ELCB/RCCB on fully concealed suitable MS box with necessary inter connections and earth connections using copper cable including cost of all materials etc., all complete.

EL0186) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0200) Run of main with 4 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable.

EL0252) Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0237) S & F of 450 x 375 x 20mm thick TW plank

EL0618) Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End

EL0312) Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

EL0174) Supplying and laying of 8 SWG GI wire

EL0230) Supplying and fixing of 3 Nos.of 100 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole EB street pole with necessary clamps including cost of all materials etc., all complete and as directed by the departmental officers.

EL0434) Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

NL0002) Supplying Fabrication and Erection in position of M.S. scheme name and layout board

NL0005) Supplying and fixing in position of 15" height TNPHC Emblem size aluminium die casting TNPHC Logo / Emblem

NL0006) Supplying and fixing of following size Aluminium dye casting lettering and numbering c) 12" dia aluminium letters

a) 9" dia aluminium letters

NL0007) supplying and fixing of size 24" x 4" and 5" dia plastic form plate of 3mm thick with 3" height vinyl cutting numbers with approved colours etc., complete and as directed by the departmental officers. (the quality of the material should be got approved from executive engineer before use)

MS0059) Supplying and delivery of following God - rej novtal lock including all cost of lock and labour charges etc., all complete and as directed by the departmental officers. a) 6 Lever with 3 keys

WS0278) Supply and delivery of clear water vertical wet type 3 phase 5 HP - Submersible pumpset with ISI mark suitable for 150mm dia borewell o. 50 lpm x 175 m

WS0267) Supply of 50mm dia UPVC Column pipe threaded pipe approved quality with ISI mark etc., all complete and as directed by the departmental officers.

WS0266) Supplying and fixing of 5 HP three phase panel board D.O.L with two level guard and auto start

EL0292) Supplying and delivery of following dia GI Pipe c).80mm dia

EL0294) Supply and laying of B class following dia G.I.pipe of best approved quality with ISI mark below G.L for drawl of cable with necessary earth work excavation in all soils and subsoils and refilling the trenchs with excavated earth, consolidation b) a) 32 mm dia

WS0018.III.h) 80mm Dia GI Bend

EL0380) Supply and erection of 200 Amps capacity floor mounting metering panel board (Cubical type) with bus bar chamber made up of 16 / 14 SWG MS sheet for 3 phase 4 wire system with 25mm x 6mm tin coated copper flats for phases and 25mm x 3mm for neutral cable chamber, switch chamber and with 2 Nos. 25mm x 3mm tinned copper flat for the earth bus on the rear side of the panel board, necessary interconnections by copper flat of suitable sizes, suitable PVC colour sleeves for the interconnecting copper flats / rigid copper wire, earth connections to all switches / bus bar by copper flats of suitable sizes from the earth bus, hylem sheet separation between bus bar and switches, 1 set LED pilot lamps with switches, fuse units, suitable angle iron frame of size 40mm x 40mm x 6mm with painting in two coats of suitable colour over one coat of red oxide and with numbering, superscription of cables sizes, capacity of switches etc and incorporating the following: Incoming: 3 Nos. 500A cutouts Bus capacity: 200A 3 phase 4 wire system with copper bus Out goings: 17 Nos. Switch chamber - each chamber containing 3 Nos. 63A fuse units, 1 No. 25 x 3 100mm copper flats for neutral, 40A 10 KA TPN MCB, space provision for fixing TNEB Energy Meter and glass cover of suitable size for taking meter readings.

EL0339) Supplying and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15m layer of sand and covering the cable completely with bricks and sand refilling the earth including cost of all materials and labour charges all complete h). 3.5 core 50 sq.mm.

EL0358) Supplying and fixing of cable end termination for following PVC / XLPE LTUG Aluminium armoured cable etc all complete and as directed by the departmental officers. f. 3.5 core 50 Sqm

EL0343) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc h). 3.5 core 50 sq.mm.

Please Enable Macros to View BoQ information