SITC of Suspended LED Light Fixtures On Existing Ornamental Poles in the Lawns at New Secretariat, Srinagar along with PPR Piping arrangement for Refilling of Fuel to 2 No. 625 kVA DG Sets Under Capex Budget 2024-25 (Scheme Code PDDSS2324100143)

Amount

LED Lights on Existing Lighting Poles of Lawns

Supply of Suspended Light Fixture 40W, IP65, body made of Spun aluminium and clear acrylic protector, CCT3000K/4000K/5700K, CR170, internal control gear with inbuilt surge protection of 5kV, LM80 Certified high power LED

Installation, Testing and Commissioning of Suspended Light Fixture which is to be mounted/groved/fixed on existing pole bracket having 59mm dia ( Connector/Reducer etc to be included if required for fitting LED light on existing pole bracket)- Including dismanlting of existing LED fixtureS/luminaries

Supply of 2.5 sqmm Multi Strand Copper Wire Flame Retardant Low Smoke & Halogen FR-LSH PVC Insulated (Coil = 90 mtr)

Laying of 2.5 sqmm Multi Strand Copper Wire Flame Retardant Low Smoke & Halogen FR-LSH PVC Insulated (Coil = 90 mtr)

Supply of 4 x 25 mm sq armoured aluminium XLPE LT cable

Supply of HDPE Pipe (Non-Corrugated PE 100 / PN 20) Outer Dia 50 mm Inner Dia 38 mm

Supply of HDPE Pipe Bends/unions/elbows suitable for HDPE Pipe (Outer Dia 50 mm Inner Dia 38 mm) whereever required

Laying of 4 x 25 mm sq armoured aluminium XLPE LT cable in HDPE Pipe laid underground ( Minimum depth of 1.5ft/2 ft below ground level for normal ground/flower bed respectively) - Rate shall include both laying of HDPE Pipe underground (with bends/elbows/unions) and LT cable within the HDPE Pipe. The work shall include excavation of ground at working site. The job further inludes refilling back the soil and removal of surplus excavated material to an appropriate place. Sections of Grass patches in the lawn area need to be properly excavated and refurbished back post laying of cable and refilling of soil.

Laying of 4 x 25 mm sq armoured aluminium XLPE LT cable in existing trenches / conduit / along boundary wall using cable saddles, wherever required

Supply and Installation of ABS Rectangular IP 65 Heavy Duty Waterproof Junction Box with 4 pole / Four way terminal block/Connectors with 6 Amp MCB and all allied acessories of appropriate size (thimbles/crimping/ tapping, screws, steel strap for mounting on ornamental poles included)

Supply of PU Enamel, High Gloss Finish Black Paint along with complete Painting of existing ornamental poles . The job shall include Surface cleaning /scuffing, scratching rubbing away dirt

Supply, Installation, Testing and Commissioning of Indoor type LT Panel (suitable sized) fabricated out of CRCA sheet (2mm thick), fitted with 1 NO. 63 Amp 4 pole MCCB - 10 kA (main)and Al- Bus bars (24x8mm) with output circuits carried through 3xNo. 16 Amps 4 Pole MCCBs (10 kA) for 3 outgoing circuits. The Aluminum Busbar for Phases & Neutral should be of size 25x8 mm and with Heat Shrinkable bus bar insulation tubing of Red Yellow-Blue & Black mounted on epoxy resin cast bus insulators fixed on suitable fixing arrangement with adequate clearance. The DB should have Bottom entry of Cable with proper Glands/grommets-Safety Screws The panel shall also be provided with Automatic timer switch with connector controller for operation of streetlights.

PPR Piping Arrangement for Refilling of 2 No. 625 kVA DG Sets

Providing and Laying of 32 mm PPR Pipes (PN 20)

Providing and Fixing of 32 mm Ball Valve

Providing and Fixing of 32 mm Socket

Providing and Fixing of 32 mm Union

Providing and Fixing of 32 mm Plain Elbow

Providing and Fixing of 32 mm Plain TEE

Providing and Fixing of 32 mmx 1" Male Elbow

Providing and Fixing of 32 mmx 1" Male Adaptor

Providing and Fixing of Teflon Tape

Providing and Fixing of 32 mm PPR Pipe Clamp

Providing/Submission of Both Pre and Post Work Execution Geo-Tagged Coloured Photographs of subjected work on A4 sized photopaper (2 pic per page -Pre and Post)

M/S WANI ELECTRA & SUPPLIERS (BID ID -2212164)

M/S QADRI ELECTRICALS (BID ID -2213870)