WELCOME MAINT AND CERTAIN MISC REPAIR WKS OF OFFRS

Amount

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed.

~Ditto~ all as per item No. 1.00 above but on ceiling surfaces.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.

Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors omplete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & directed.

M&L for 10mm thick Light shade vitrified ceramic tiles, exceeding 0.36 sqm but not exceeding 0.42 sqm as in vertical surface skirtings, dados etc, over and including 10 mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement omplete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade etc.complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough for laying kota stone / tiles complete all as specified and directed

M&L for glazed ceramics coloured tiles of size (450x300x 7mm) thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 half brick wall complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete etc. complete all as specified and as directed..

M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed..

M&L for vitrified heavy duty (dura stone) tiles exterior grade 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down cement plaster on wall/ceiling /roof etc including raking out joints, hacking for key and scrubbing down with water etccomplete all as specified and as directed..

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed.. Note : Liquid WPC will be measured and paid separately.

M&L Rendering 5mm thick in cement mortar 1:3 on concrete surface of ceiling and finishing the surface even and smooth complete all as specified and directed

Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

All as per above item No 24.00 but exc 1.5 Sqm but n.exc. 4 Sqm each.

Taking down shutters of any description exc 1.00 Sqm and n exc 2Sqm each complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.

S & F 35 mm thick factory made 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkats for door etc complete, size of member of shutter as specified in SSR Part -I, complete all as specified and directed.

S & F of 35 mm thick factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with MS handles and tower bolts pegstay, hold fast complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with MS handles and tower bolts hold fast complete with out glazing bar & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay hold fast including taking down existing ventilators complete all as specified and directed.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed.

S & F pressed steel frame of size 105 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates including PCC 1:3:6 type C-0 using 12.5 mm graded stone agregate as in back filling of chowkat etc., complete all as specified and directed.

S & F pressed steel frame of size 125 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates including PCC 1:3:6 type C-0 using 12.5 mm graded stone agregate as in back filling of chowkat etc., complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F solid PVC door frame of size 75 mm x 50 mm made out of choice colour PVC with wood grain solid as per specified & directed .

S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.. Make approved by GE..

S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed

S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed

S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S & F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete all as specified and directed

S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cucm each complete all as specified and directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames glazed with oil putty or fixed with beads complete all as specified and directed.

S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.

S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed

S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F in repair 40 mm dia cup board knobs, fixed with nut, screw and washer of mild steel bright finish complete all as specified and directed.

S&F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.

M & L for 2nd class Hard wood as in plain fillets, square, rectangular, traingular in section clean sawn secured with nails or brads of sectional area exc 13 & not exc 25 Sq cm complete all as specified and directed

S&F in repair 2 lever brass cupboard lock grade-I size 65 mm etc complete all as specified and directed.

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.

S&F in repair stainless steel designer curtain rod fancy type curten rod 20 mm dia as approved complete..

S & F in rapair mild steel conduit curtain rod with PVC coating fancy type drapery rod 20 mm dia with end cap of any colour as approved complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-Charge.

S&F powder coated anodised aluminium frame & shutters sliding or casement type for window/ventilator with one or more rebates including joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc for fixingcomplete all as specified and directede.

Taking up or down steel tubing and connections 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, of 20 mm dia complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directed.

S&F in repair brass chromium plated central hole basin mixer with round spout without popup waste system with 10 mm dia, 450 mm long braided hoses complete all as specified and directed.

S&F in repair 15mm dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.Prayag Cat No. 8770 or eeqivalent.

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest, 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.

S&F in repair brass chromium plated health faucet for EWC with 8 mm dia and 1.2 m long flexible CP tube long including nut/washer complete all as specified and directed. Make - Parryware Cat No- T9941A1 or equivalent

S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.

S&F in replacement of cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specified and directed.

S&F in repair cast copper alloy bib tap 15 mm bore fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed.

S&F in repair pillar tap 15 mm bore fancy type chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair brass CP steel tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete all as specified and directed.

S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstran head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed

S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make : Cera cat part No.CC-105 or Parryware part No. G4043A1 or equivalent

S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make-Prayag or equivalent (Cat No BEA-44) complete all as specified and directed.

S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed.

S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed.

S&F in repair brass chromium plated overhead shower rose swivel type125 mm with CP arms 300 mm long complete all as specified and directed.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.

S&F chromium plated toilet paper holder with flap complete all as specified and directed.

M&L for RCC 1:1.5:3 A-1 type (using 20 mm graded stone aggregate) as in kitchen platform, shelves including necessary form work complete all as specified and directed.

M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping as in stirrups hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.

Taking down PVC/AC pipes upto 110mm bore(including all fittings) with spigot & socket encls & lead joints incl burning out joints complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.

M & L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed.

M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI Marked) complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed (specified in SSR Part-I).

~Ditto~ all as per item No. 109 above but 1000 Ltrs capacity.

S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed.

S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and as directed

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and as directed

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and as directed

M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed.

.-Ditto- as per item No 120 but on ceiling surfaces

M & L for preparation of newly plastered surfaces of ceiling and applying 2 coats of white wash including preparation complete all as specified and directed.

M&Lsand filling under floors laid in layers n. exc 15cm thick spread ,levelled and rammed including watering all as specified and as directed.

Dismantling structural steel work in?cluding doors, gates but excluding framed truss etccomplete all as specified and as directed

S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc. including cutting, welding etc. confirming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Preparing surface of sunken slab and applying 15 mm thick plaster in cement mortor 1:4 mixed with and including integral water proofing compound both on floor and wall. The surface shall be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.

Cleaning, removing all scale, dust, dirt and elgy using wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black paint on white base on tank "Tank cleaned on ____ Dt_____". Capacity 500 Ltrs all as directed by Engr-in-Charge.

All as per item No 128.00 above but capacity 1000 litres.

M&L for treating the surface including grinding and polishing with beewax polish in terrazzo floors complete all as specified and directed. (Necessary T&P will be provided by contractor)

S&F in repair garage/gate mild steel door shutter including necessary welding if required and make it functional as specified and directed

Easing of steel window of glazed and gauzed shutter including oiling, greasing and welding if required and make it functional as specified and as directed.

Easing of wooden door shutter (Panelled or skelton) and make it functional as specified and as directed.

M&L for two coats of weather coat paint (apex) on old surfaces of wall including preparation of plastered surfaces complete all as specified and as directed by Engr-in-Charge. (Make: asian, Durolex or equivalent)

Dismantaling of Asbestos cement/GI (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

J K CONSTRUCTION (BID ID -3068144)

SINHA CONSTRUCTION (BID ID -3066265)

M/s Naresh Chand Agrawal (BID ID -3063654)

SARKAR BUILDERS (BID ID -3068450)

HARINANDAN RAI SONS (BID ID -3066203)

MS BIJAY KUMAR AND SONS (BID ID -3068378)

M/S ANAND MOHAN ENTERPRISES (BID ID -3068249)