MAINT/REPAIRS TO FENCING, GATE, COMPOUND WALL, FOOT PATH, HARD STANDING, REPAIR TO DRAIN AND CLEANING OF DRAIN ETC AND CERTAIN MISC REPAIR TO DOOR, WINDOW, FLOORING AND ROOF TREATMENT ETC AT INS PARUNDU UNDER GE TIRUNELVELI

Amount

Dismantling Posts or struts (Steel or R.C.C) any section includiung taking out embedded portion and making good distrubed ground all as specifeid and as directed.

Dismatling fencing wiremesh, any type all as specified and as directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance not ext 50m and making good surface in soft/loose soil complete all as specified and directed

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.

M&L for mild steel frame work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square exc 22.5 cm and not exc 30cm long complete all as specified and as direcetd.

S&F 4mm dia GI steel wire PVC coated 75mm X 75mm mesh as in chain link fencing including straining and fixing to posts and to straining bolts including securing with and provision of galvanised iron,PVC coated,tying with wire etc complete all as specified and as directed.

M&L for preparing new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for brick work in CM (1:4) using sub class bricks 'B'. Straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces.

M&L for preparation of new plastered surface and applying two coat of cement base paint over a coat of primer of brick work or concrete surfaces.

M&L in repairs razor blade galvanised barbed Concertina coil 900mm dia meter made out of 2.59mm thick galvanised wire having weight of each coil @ 15.2 Kg+/- 5% stretched to a length of 10 to 12 m to achieve 800 mm dia as in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fasteners such as J clips, C clips, U clips etc fixed in position complete all as specified and as directed by Engineer-in-charge.

M& L in repairs Reinforced punched barb tape, with short barbed profile made out of GI reinforced core steel wire 2.5 mm dia and 0.5 mm cold clenched strip barbs around the core wire including 12 gauge spring steel GI wire having minimum tensile strength of 1650 kg/sqmm including fixing to concertina coil/steel posts/frames complete all as specified and as directed.

M&L in repairs razor blade galvanised barbed Concertina coil of 1050 mm diameter made out of 2.59 mm thick galvanised wire having weight of each coil @ 15.2 kg ± 5% of coil, stretched to a length of 10 to 12 m to achieve 950 mm dia as in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fasteners such as J clips, C clips, U clips all as specified and as directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description etc complete.

M&L for preparing Old steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc., including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for rendering 5 mm thick in cement mortar 1:4 over 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces.

M&L for preparation of new plastered surface and applying two coat of cement base paint over a coat of primer of plastered surfaces complete all as specified and directed.

M&L for preparation of old plastered surface and applying one coat of cement base paint on brick surfaces complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete

Material and labour for brick work with sub class 'B' old size built in CM 1:4, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Material and Labour 10mm thick Rendering on fair faces of brick work or concrete surfaces built in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings not exc 15 cm thick below or above GL complete all as specified and as directed.

Material and labour plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations and mass concrete all as specified and as directed.

Material and labour for walling of random rubble stone masonry, brought to coursed well bonded, bedded and solidly hearted built in CM 1:6 including through stone/bonders complete all as specified and as directed

Material and labour for providing cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate cast in situ as in copings and the like including weathering, slightly rounded or chamfered or chamfered angles as directed including use of form work as necessary all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate, in surface channel and drains including necessary form work complete all as specified and directed.

S&F for framed work as in door or gate of angle other section with gussets plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering Door etc to be prepared for hanging with included pintles and steel hanging fittings and hanging also fastening fixing complete.

M&L for two coat of Synthetic enamel paint over a coat of primer red oxide, zinc chrome after preparation of new surfaces complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in floor, laid in panel, surface finished fair and even without using extra cement including necessary formwork complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade 'A' complete all as specified and as directed.

M&L 100 mm thick plain cement concrete Type D2 1:4:8 (using 40 mm grtaded stone aggregate) as in sub floors all as spcifed and as directed.

M&L chequred Cement concrete tiles 20cm x 20xm x25mm thick, with grey cement and pigment machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished inluding Screed bed or bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes complete all as specified and directed.

M&L removing excavated material / soil to a distance exc 250m but n.exc 500m away and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specifed and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L 25 mm thick PCC (1:2:4) type B-0 (using 12.50 mm graded stone agggregate) as in floors complete all as specified and as directed.

M&L for vitrified ceramic coloured tiles dark shade/Double charged/ultra charged 10 mm thick (square / rectengular) polished area of each tile n exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :4 in flors etc complete all as specified and as directed.

M&L for vitrified ceramic coloured tiles dark shade/Double charged/ultra charged 10 mm thick (square / rectengular) polished area of each tile n exceeding 0.36 sqm , on verticle surface such as in dado / skirting etc over and including 10 mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding .011 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding .011 sqm but not exceeding 0.18 sqm in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 10mm thick in CM1:4 on brickwalls for skirting/DADO complete all as specified and as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified.

M&L Glazed ceramic colour tiles in vertical surfaces 350x 250x 7mm/ 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 10mm thick in CM1:4 on brickwalls for skirting/DADO complete all as specified and as directed.

Supply and fixing in repairs plastic water closet seat cover for EWC, black closed pattern with flat bottom and cover and MS CP or aluminum hinges device complete all as specified and as directed.

Supply and fixing in repairs vitreous china ware wash basins, white falt size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets) complete all as specified and as directed.

Supply and fixing in repairs CP brass shower rose 125mm size fixed to 15mm pipe of revolving type complete all as specified and as directed.

Supply and fixing in repairs 15mm dia bib taps, cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fixing in repairs 15mm dia bore stop valve, cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions CP fancy type complete all as specified and as directed.

Supply and fixing in repairs pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever if any complete all as specified and as directed.

Supply and fixing in repairs pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints complete all as specified and as directed.

Supply and fixing in repairs vitreous china ware European type WC with and ‘S’ trap complete all as specified and as directed.

Taking down old door or window Chowkhats or frames n.exc 1.50 sqm each with shutters but without taking off shutters from the framescomplete complete all as specified and as directed.

Taking down door or window Chowkhats of frames of size exc 1.5 sq.m but n exc 4sqm each with shutters ( Without taking of shutters from the frame) complete all as specified and directed..

Taking down door or window shutters exc 2 sqm ( Without taking of shutters from the frame) complete all as specified and directed.

S & F Anodised aluminum frame for doors, windows, grills, ventilators with one or more rebats including joining cleat for fixing etc complete all as specified and as directed.

S&F Anodised aluminum window and ventilator shutters,side hung type with out sash bars, aluminum sections weighting 0.55 kg/m including necessary joining cleats, glazing clips, rupper packing anodised aluminum snap beading, screws, anodised aluminum fitting such as peg stays 150 mm long(1No) hinges type B-21 100 mm long(2 no) suitable handle (1 No) complete all as specified. Note : Glass will be measured and paid separately.

Supply and fixing of 4mm thick sheet glass ordinary quality and in squares exc 0.50 sqm in each pane complete all as specified and directed.

S& F 4mm thick frosted sheet glass ordinary quality and glazing with oil putty in squares n exc 0.50 sqm in each pane complete all as specified and directed.

S&F of aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Factory made solid panel pvc door shutter 30mm thick consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour pvc ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rail with suitable PVC sheet beading, & joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Factory made Solid PVC Door Frames of size 50mm*47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 100 mm mild steel butt hinges, heavy weight, colled rolled mild steel including screws all as spefied and as directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 125 mm cast type anodised complete all as specified and directed.

S&F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and fix mild steel bands , straps, hold fast and similar work conforming to Fe 290, Gde E-165 all as specified and directed.

M&L PCC(1:3:6) type C1 (20 mm graded aggregate) as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.

S&F 2nd class hard wood plain,solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete all as specified and directed.

S&F of Factory made 35 mm thick 2nd hard wood plain framed panelled shutters(any panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003(Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thk 2nd class Hardwood Glazed & skeleton shutters, open rebated and prepared to receive glass,gauge,wiremesh, etc divided into squareswith plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specifed in SSR part I complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F aluminium anodised 250 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 150 mm cast type anodised all as specified and as directed

S&F 300mm, ordinary MS rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.

S&F 30mm thick 2nd class Glazed & skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred & rebated sash bars, any number complete all as specified and as directed.

S&F 75 mm mild steel butt hinges, heavy weight, colled rolled mild steel including screws all as spefied and as directed.

S&F aluminium anodised 100 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 100 mm cast type anodised complete all as specified and as directed.

M&L Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 sqm in each pane and solar control film 50 mcronreflective type sticked to glass panes as per instructionsof manufactures complete all as specifed and as directed.

S&F in 150 mm floor door stopper of luminum alloy body and tongue anodised with hard drawn steel spring fixed in floor all as specified and as directed.

S&F in repair aluminum door closer hudraulically regulated, designation No m, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 82 kg all as specified and as directed.

S&F aluminum door closer hudraulically regulated, designation No m, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 82 kg all as specified and as directed.

S&F in repairs, Mortice locks (vertical type ), mild steel and fixed. Length of latch 100mm 4 levers complete all as specified and as directed.

Proviiding and fixing factory made uPVC white colour sliding window Three track made of extruded profile with wall thickness of 2.30 mm (+/- 0.2 mm). Window profiles with hollow section with multi chamber, Frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), SLiding mesh sash (42 mm x 67 mm), sliding interlock (One vertical length in each shutters)(45.5 mm x 28 mm). Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners, includiing railing of holes for fixing hardware and drainage of water etc. making arrangment for fixing of hardware. EPDM gasket 1.20 mm +/- 0.20 mm thickness galvanized steel frame ( 30 mm x 18 mm ) 2 Nos, sliding sash (30mm x 18 mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners. Hardware: [ Touch lock of Zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36 mm nominal dai of wire and average aperture 1.40 mm and required accessories. (Note: The unit rate quoted by contractor exccludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)

S.RAMACHANDRAN

GMS Builders

K.AYYAPPAN