Internal Electrification of MRF Shed Sui Udhampur

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 4 sq. mm

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

SITC of FEEDER PILLAR 1 phase 2 wire, 415V, 1nos of 200 Amps incoming SP MCCBS fitted with outgoing 05 No 32 Amps SP MCBs for Service Connections, Distribution Service Pillar suitable for outdoor installation, made out of CRCA sheet painted through 7-tank process with PU painted Busbars 2P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accessories 4 way Distribution Service Pillar. Support Galvanised angle frame and legs (40mm x 40 mm x 3mm) for Distribution Feeder Pillar with leg height 1m with 0.3m in soil approx [email protected] per mtr, Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through Gl Strip. Cement grouting for support angle legs, Spares @ 3%, Erection Charges @10%, Overheads @ 5% (1.0% T&P 0.5% Storage and Handling, 3% Contingency and safety equipments, 0.5% Insurance) and Turnkey factor @25% (SITC of 1-Phase feeder pillar, 4-way complete)

Supplying and fixing following modular switch/socket on the existing modular plate &switch box including connections but excluding modular plate etc. as required. 2 way 5/6 A switch

Supplying and fixing following modular switch / socket on the existing modular plate &switch box including connections but excluding modular plate etc. as required. 15/16 A switch

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing of wall fan 400 mm sweep suitable for operating on 50 Hz including connections etc as required (reputed make) Make Havells, Crompton, Bajaj, Atomberg

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module