SITC of high efficiencyLEDlights in existing securitylight poles installation of weatherproof outdoorfeederpillars with MCCBSwitchgears in UG cable distribution of boundarylights IC earthingpainting foundationworksfornew feederpillars at SHQ BSF BDR.

Amount

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal/ coke and salt ) as required.

Providing and laying earth connection from earth electrode with 6 SWG dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I.thimble excavation and re-filling as required.

SITC of Energy saving,environmental friendly, die-cast aluminium IP66 flood lights with power LED as light source, having specifications of 180 watts,make HAVELLS and ordering code LED757MODASYMLTG with 200 watts LED driver unit of ordering code ASSEMCGBOXVALOUR 200WS on existing boundary light poles by drilling holes as per the dimensions of light fixtures with suitable size nuts bolts and making connection earthing including dismantling of old fittings without any damage and depositing with engineering stores as required .(Price including GST) or other compatible make of PHILIPS/CG/BAJAJ with non-integral LED Driver unit) (I/C dismantling of old fixtures)

Supplying and drawing 5 core copper wire 1.5sqmm of FRLS PVC insulated copper conductor, single core cable in the existing per pole as required. including dismantling of old copper wires without any damage as required .(Price including GST)

SITC of fabricated outdoor compartment double door distribution feeder pillar duly synthtic enamel painted CRCA steel 3 MM THICK having feeder pillar size 900(L)x1000(H)x500(W) mm comprising TPN Alluminium busbar strip on SMC/DMC support and openble door cover having looking arrangement, cable way with provision of fixing cable glands at the bottom, air ventilation groves at the sides, insulators, earthing studs, nuts & bolts etc and priming with red oxide and two or more coats of smoke grey finish paint complete as per CPRI approved, duly mounted on 50 mm x 50 mm x 6 mm MS angle frame i/c errection laying in position cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 40 mm nominal size) etc as req.as

providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreader in existing cubicle pannel board including drilling holes in cubical panel , making connection, and etc as required make L&T/HAVELLS/C&S).

63 A 35 KA at 415V FPMCCB

providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreader in existing cubicle pannel board including drilling holes in cubical panel , making connection, and etc as required make L&T/HAVELLS/C&S).

100 A 35 KA at 415V FPMCCB

M/S SUNIL KUMAR SURI

M/S ROYAL ENGINEERS AND CONTRACTORS