REPAIR TO FENCING BOUNDARY WALL DRAINS CULVERTS HARDSTANDING RETAINING WALL AT 58 GTC HAPPY VALLEY UNDER GE SHILLONG.

Amount

Dismantling fencing wire mesh, any type etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of new GI binding wire etc complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or type etc complete all as specified and as directed.Note:- The unit weight of chain link shall not be less than 4 kg per sqm.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground in natural ground etc complete all as specified and as directed.

S&F mild steel works such as Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 ( using 20 mm graded stone aggregate) as in fixing of RCC / PCC posts and similar types of works etc complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance n.exc. 50 m from the starting point etc complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.

S&F mild steel flat iron / angle iron fixed to posts to hold chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for holding bars for chain link fencing fixed at top and bottom , including linking one to another horizontal bar conforming to Fe-410-W 432 (Part I) (Gde.E-250) Part- I quality-A or Fe 290 (Gde E-165) etc complete all as specified and as directed.

S&F Mild steel 16 to 20 mm dia screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm long but n.exc. 22.5 cm long etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description and girth, not otherwise described and treated with two coats synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for PCC Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, (using 20 mm graded stone aggregate), exc 10 Cm width and setting in cement sand mortar 1:6 including demolition of old unserviceable one and removing the debris completely from site and throwing in low lying area outside MoD land etc complete all as specified and directed.

M&L for Rendering 15 mm thick plaster on fair faces of brick work or concrete surfaces in cement sand mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed.

M&L PCC type C2 ( 1:3:6, using 40mm graded crushed stone aggregates) as in surface channel and drain including necessary formwork etc complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc.complete all as specified and as directed.

M&L for 40 mm thick PCC,1:3:6 type C-1 ( using 20 mm graded stone aggregates) , as in flooring and paving etc finished cement concrete even and smooth without using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC, 1:3:6, type C2, (using 40 mm graded stone aggregates) as in flooring etc and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

Demolition of Cement Concrete of any description ( reinforced / unreinforced) and in any position not otherwise specifically provided for etc complete all as specified and as directed.

M&L for Mild steel TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.

M&L for Precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate)as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in cement sand mortar (1:6) etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete all as specified and as directed.

Demolition of stone masonry, for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling built in cement mortar etc complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed well bonded, bedded solidly hearted , built in cement mortar 1:6 etc complete all as specified and directed.

Extra over stone walling for hammer dressing maximum depression on face from straight edge held against the dressed surface n exc. 20 mm to face stones and dressing of face beds and joints of random rubble walling, uncoursed or brought upto courses etc complete all as specified and as directed.

M&L for raised pointing to random rouble uncoursed or brought upto course stone masonry wall in cement sand mortar 1:4 etc complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-0 ( using 12.5 mm crushed stone aggregate ) ,finishing even and smooth without using extra cement etc complete all as specified and directed.

M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base layer etc including taking down old unserviceble one etc complete all as specified and as directed by Engineer-in-Charge. Note WPC shall be measured and paid separately.

Supply only integral water proofing compound, ISI marked etc complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned cement base paint over a coat of exterior grade wall primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of wall ( plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts if required and applying one coat of Cement base paint including necessary preparation etc complete all as specified and directed.

S&F 450 mm bore RCC pipes, class NP2 ( ISI Marked) laid and jointed with cement sand mortar 1:3 including demolition and breaking up old unserviceable one of any description and removing demolished pipe outside MoD land area etc complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 ( using 20 mm graded stone aggregate ) etc complete all as specified and as directed.

M/S INSHA ELECTRICALS

M/S UTTAM SAHA

S K DEY

M/S SR BUILDERS