Construction of CR stone masonry boundary wall, renovation of inspection house and staff quarters at Deori Inspection house, Prayagraj

Amount

Dismantling reinforced cement concrete 1:2:4 Including Stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60M.

Dismantling door or window including chaukhat with holdfast including stacking of materials as directed by Engineer-in-charge within a distance of 60 M.

Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 6OM.

Dismantling brick work or stone work in lime or cement mortar including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 6OM

Earth work in excavation of foundation including back filling of excavation earth

C.C. 1:3:6 in foundation (one part of cement, 3 part of coarse sand FM>2.00, 6 part of stone ballast 20 to 40M.M.) including cost of all material, labour, T&P, etc.

Centering & shuttering for R.C.C. of slab including cost of labour, material ,T&P etc.

Steel reinforcement in slab including cutting bending, binding and placing in proper position including cost of steel, binding wire, labour, and T&P etc.

R.C.C 1:1.5:3 with coarse sand, cement Stone ballast 10 to 20 mm in size including Cost of all materials, Labour, T&P etc. required for proper completion of work.

C.R.S. masonry with cement mortar 1:3 for wall including cost of all material, labour, T&P, etc.

Cement plastering (1:3) on stone masonry 12 mm thickness including cast of materials T&P etc.

Cement plastering (1:3) on brick masonry with neat cement slurry including cast of materials T&P etc.

Raised Cement pointing (1:2) on stone masonry including cost of all material latbour T&P required for proper completion of' work.

Struck deep Cement pointing in stone masonry in 1:2 C.M. including cost of all material, labour. T&P, etc.

Providing and fixing pressed steel Chaukhat made of M.S. Sheet 18 gauge (1.25 mm.) double ribet including iron hinges of 100 X 3 MM. I.S.I. Mark drilling holes of L-drop, tower bolt and 230 x 40 X 6 mm. flat iron hold fast including supply of all materials, labor, T&P ,carriage up to site with one coat of red oxide primer

Providing and fixing pressed steel Chaukhat made of M.S. Sheet 18 gauge (1.25 mm.) single ribet including iron hinges of 100 X 3 MM. I.S.I. Mark drilling holes of L-drop, tower bolt and 230 x 40 X 6 mm. flat iron hold fast including supply of all materials, labor, T&P ,carriage up to site with one coat of red oxide primer.

Supply and Fixing of 4.5 cm thick seasoned wood fully paneled door and window Shutters including supply and fixing of wooden cleats and stops and including fixing & adjustment or hinges, bolts, lacks handles springs and/or other fittings but excluding painting with two coats of Black. Japan on all iron fittings if necessary.

Fabrication and fixing of Mild steel / iron work in grill, gates. railing, door. window frames including cutting. drilling, welding rewetting and fixing hinges where necessary with fixing of position including cost of all material, labour, T&P etc. required for proper completion of work with one coat of red oxide primer.

C.C. 1:3:6 in flooring and apron making including cost of all material, labour, T&P, etc.

25mm. cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm. nominal size) laid in one layer finished with a floating coat of neat cement.

25mm. cement concrete flooring on the roof 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 10 mm. nominal size) with water proofing material laid in one layer finished with a floating coat of neat cement

Fixing glass strips 3 mm. thick 32 mm wide in joints of floor and skirting at the time of laying floors flush with floor level including cost of all material, laoour, T&P etc

P/laying (white colour) Kajaria tile/ Romano tiles flooring over 20 mm. (average.) thick base of cement mortar 1:4 (1 cement :4coarse sand) raid and jointed white colour cement (with pigment) slurry including cost of all material, labour, T&P rubbing and polishing complete in all respect

P/Laying 6 mm, china white glazed or colour tiles in wall laid With 1:3 cement & coarse sand mortar finished with white cement slurry, jointing & polishing complete, including supply of all material, labour, T&P etc. required for proper completion of work.

Finishing wall and ceiling with white colored two coat approved make of or Birla / J.K. wall putty including cost of all material labour T&P required for proper completion of' work.

Distempering two coat of oil bound distemper of approved make of Burger, Asian, Nerolac, over one priming coat of cement primer on new surface after thoroughly brushing the surface free from mortar dropping making the surface even with plaster of Paris/whiting and sand papered Smooth including cost of materials, Labour, T&P etc. required proper completion of work.

Painting two coat of synthetic enamel paint on new steel surface (excluding cost of primer) including cost of all material labour T&P etc. required for proper completion of work .

Painting one coat of wooden primer on new wooden surface including thoroughly cleaning of dirt & other foreign matter and sand papering & making smooth surface.

Painting two coat of Synthetic enamel paint on new wooden surface (excluding cost of primer) superior quality such as luxol, higloss, apcolite, superior. dulux, including cost of all material, labour T&P etc. required for proper completion of work.

Centering & shuttering for C.C. of coping including cost of labour, material ,T&P etc.

Laying C.C. 1:2:4 with 10-20mm. size grit on wall coping including cost of all material, labour, T&P, etc.

Providing fixing in position on angle iron section ISA-35x35x5MM thick for barbed wire fencing including cutting with cost of all material labour T&P etc. with one coat of oxide primer.

Providing barbed iron wire fencing including fixing it to post after stretching including cost of labour, material ,T&P etc. required for proper completion of the work.

1st class Brick work in cement mortar(1:3) .Rate are for 3m. height. lead up to 60M. including cost of materials.

1st class Brick work in cement mortar(1:6) .Rate are for 3m. height. lead up to 60M. including cost of materials.

1st class Brick work in dry masonry .Rate are for 3m. height. lead up to 60M. including cost of materials.

40 mm size brick aggrigate filling including cost of all material, labour, T&P, etc.

Local Sand filling outer the Soak pit including cost of all material, labour, T&P, etc.

Precast R.C.C. work 1:1.5:3 excludiing reinfcrcement, Centerinng & Shuttering.

provinding and fixing stainless steel kitchen sink 510x310x200 with C.I. bracket including cost of other fitting including cost of material.

provinding and fixing wash basin with holes for pillar tap, with C.I. or M.S. brackets painted white including cutting hole & making good the same , cera/such approved make including fitting and cost of materials.

provinding and fixing water tank 500 L any approved brand such as Sintex and fitted with inlet and outlet wash out overflow with all cost of material and labour etc.

provinding and fixing mirror of 450 × 350 mm size of approved make with teak wood molded frame and 6 mm thick board backing including cost of all material, labour T&P etc

100mm dia PVC Pipe (approved brand and ISI marked ) Laying and fixing in position with all cost of material and labour etc.

provinding and fixing orissa type white glazed earthen ware 1st quality ISI marked W/C pan Indian make of approved quality including cost of all materials

provinding and fixing European type white glazed earth ware W.C. pan (Indian make of approved '1st' quality ISI marked Bakelite seat cover & lid with C.P. brass sand) including cost of material.

provinding and fixing 100 mm size 'P' or 'S' trap '1st' quality ISI marked for water closet squatting pan including jointing the trap with the pan and pipe in cement mortar 1:1 (1 cement; 1 fine sand) including cost of material.

provinding and fixing 15 mm dia concealed CPVC pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete (internal works) including cost of material

provinding and fixing 25mm dia concealed CPVC pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete (internal works) including cost of material excluding cost of fittings.

provinding and fixing 15mm dia stainless steel bib cock approved brand and ISI marked including cost of all material.

provinding and fixing 15mm dia stainless steel pillar cock approved brand and ISI marked including cost of all material.

provinding and fixing 15mm dia cpvc union approved brand and ISI marked including cost of all material.

provinding and fixing 25mm dia cpvc union approved brand and ISI marked including cost of all material.

provinding and fixing 15mm dia cpvc albow approved brand and ISI marked including cost of all material.

provinding and fixing 25mm dia cpvc albow approved brand and ISI marked including cost of all material.

provinding and fixing 15mm dia cpvc socket approved brand and ISI marked including cost of all material.

provinding and fixing 25 mm dia cpvc socket approved brand and ISI marked including cost of all material.

provinding and fixing 25 mm dia cpvc Reducing T fitting approved brand and ISI marked including cost of all material.

provinding and fixing 25 mm dia cpvc T fitting approved brand and ISI marked including cost of all material.

provinding and fixing 25 mm dia stainless steel water mixer approved brand and ISI marked including cost of all material.

provinding and fixing 15 mm dia stainless steel angle cock approved brand and ISI marked including cost of all material.

provinding and fixing 15 mm dia flexible supply tube 600mm long approved brand and ISI marked including cost of all material.

provinding and fixing pedestal for wash basin approved brand and ISI marked including cost of all material.

provinding and fixing PVC waste pipe for wash basin and sink approved brand and ISI marked including cost of all material.

provinding and fixing nahani trap with jali approved brand and ISI marked including cost of all material.

provinding and fixing 25mm dia cpvc float valve approved brand and ISI marked including cost of all material.

provinding and fixing 25mm dia cpvc valve approved brand and ISI marked including cost of all material.

Wiring point for light with 1.5 Sq.mm. FR PVC insulated multistrand copper conductor cable or earth wire drawn inside the PVC conduit pipe concealed in the wall complete with 8 SWG.I. earth continuity wire and piano type switch etc.

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire drawn inside the PVC conduit pipe earth continuity wire and piano type switch etc. complete in all respects.

Wiring point for plug with 1.50 sq. mm FR PVC insulated multistrand copper conductor cable or earth wire drawn inside the PVC conduit concealed in the wall complete with 8 SWG G.I. wire earth continuity wire and piano type switch and socket etc. complete in all respects

Wiring point for power plug/H-P.M.V./Sodium Vapour lamp with 2.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire drawn inside the P.V.C. conduit concealed wire with 15A piano type switch complete in all respects (complete rate)

Providing and fixing fixing of fan hook fabricated form M.S. rod for ceiling fans (Complete rates)

Isolater (63A) supplying and fixing make type L.K./Havells/Siemens/L&T or any approved brand complete in all respect.

MCB (16A) supplying and fixing make type L.K./Havells/Siemens/L&T or any approved brand complete in all respect.

MCB (10A) supplying and fixing make type L.K./Havells/Siemens/L&T or any approved brand complete in all respect.

Fan regulator supplying and fixing make type Surya/Orient/Havells or any approved brand complete in all respect..

Ceiling rose supplying and fixing make type Surya/Orient/Havells or any approved brand complete in all respect.

Transportation of Rig Machine And its T & P with Loading Unloading and manual sifting of clamp and eqipapages at site and return back after completion of work

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (0 to 10m)

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (11 to 20m)

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (21 to 30m)

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (31 to 60m)

Supply and Filling of Bentonite slurry durnig Drilling work incluiding all cost of material and Labour etc.

Supply and lowring of 100mm dia PVC casing pipe with isi mark incluiding all cost of material and Labour etc.

Supply and lowring of 100mm dia PVC casing slotted pipe with isi mark incluiding all cost of material and Labour etc.

Supply stone grid (4.75 mm to 10mm) including filling surrounding in bore well.

Dovelopment of bore by air compressore.

Supply and installation 32 mm dia PVC column pipe 10 Kg/cm2

Supply and installation of 1 HP water filled submersible Pump set Approved make complete with starter panel etc.

Providing and fixing of 32 mm dia 1 pair Iron Clamp

Providing and fixing of Submersible Cable 2.00 sq mm Finolex make or approved brand

providing and fixing of 32 mm dia pvc Elbow

providing and fixing of 32 mm dai cpvc Nipple

providing and fixing 100 mm dia steel bore end cap

providing and fixing 100 mm dia steel Bore Cap

providing and fixing of 32 mm dia cpvc Gate valve

providing and fixing of Nilon mesh and dori

providing and fixing of high tensile steel Supporting wire for submersible pump