Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-Finance | ₹15.5 L | L1 | Accepted-Finance BEING LOWEST |
| 2 | L2₹15.9 L+₹38,564 (2.49%)Accepted-Finance HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD PIN 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | ₹15.9 L+₹38,564 (2.49%) | L2 | Accepted-Finance OTHER THAN LOWEST |
| 3 | L3₹20.3 L+₹4.8 L (31.0%)Accepted-Finance 303 MAHESH NANGIA 303 PRAGATI CHAMBERS RANJIT NAGAR COMMERCAIL COMPLEX RANJIT NAGAR COMMERCIAL COMPLEX | ₹20.3 L+₹4.8 L (31.0%) | L3 | Accepted-Finance OTHER THAN LOWEST |
| 4 | L4₹20.9 L+₹5.4 L (34.7%)Accepted-Finance | ₹20.9 L+₹5.4 L (34.7%) | L4 | Accepted-Finance OTHER THAN LOWEST |
| 5 | L5₹23.2 L+₹7.7 L (49.7%)Accepted-Finance H NO 1346 SECTOR 13 P HISAR 125005 HARYANA | HISAR | HISAR | HARYANA | 125005 | ₹23.2 L+₹7.7 L (49.7%) | L5 | Accepted-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
3 Jun 2020, 6:00 pmClosed
GE AF LEH
GE AF LEH PIN 915365 C/O 56 APO
CERTAIN REPAIRS TO DG SETS AT VARIOUS POWER HOUSES AND CONNECTED E/M WORKS AT AF STATION LEH
2020_MES_336261_1
GEAF-58/2019-20
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE AF LEH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF LEH
₹50,000
Yes
8 Aug 2020
26 Mar 2020
5 Jun 2020
26 Mar 2020
3 Jun 2020
9 Apr 2020
Amount
Dismantling/opening of upper portion of diesel engine 320 KVA, Make Kirloskar, water cooled, turbo charged 1500 RPM installed at Domestic Power House and repair/servicing of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete including replacement of unservicable parts and testing of DG set after completion of job as per satisfaction of enginer in charge.
Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve sheets/ guide, collect valve, valve spring etc. Notes: Spares as required/listed in this item shall be paid under item No 02 here-in-after.
Labour for repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge. Notes: Spares as required/listed in this item shall be paid under item No 02 here-in-after.
Labour for Grinding & Polishing of crank shaft and making it smooth for new higher size of bearing and all as specifed and directed by enginer in charge. Notes: Spares as required/listed in this item shall be paid under item No 02 here-in-after.
Labour for repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, barrel plunges, injectors etc suitable for 320 KVA DG Set. Notes: Spares as required/listed in this item shall be paid under item No 02 here-in-after.
Labour for assembling of engine after replacement of UNSV/defective parts with new as listed in Srl item No 2 supply only and job work listed against Srl item No 1. Note: All new spare parts and job work shall be measured and paid seperately under respective items.
Supply of spare parts to be replaced/fixed in DG set as in Srl item No 01 here-in-before for replacement of unserviceable spare parts for satisfactory functioning of engine all as specified. Notes: cost of fixing shall be paid against srl item No 01 here-in-before
Cylinder liner with sealing ring
Piston assembly with pin complete
Piston ring set
Cylinder head gasket(Front)
Cylinder head gasket(Rear)
C. R. bearing
C. R. Bushing
Hose set
Oil seal
Valve guide
Valve seat
O-ring
Intake valve
Exhaust valve
Valve spring assy
Valve spring (Inner)
Valve spring(outer)
Valve seat spring
Cam bush
Main bearing
Oil pan gasket
Turbo charger Assy
Turbo charger Gasket
Dismantling/opening of upper portion of diesel engine 225 KVA, Make cummins Model: NT 855, water cooled, turbo charged 1500 RPM installed at Technical Power House and repair/servicing of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete including replacement of unservicable parts and testing of DG set after completion of job as per satisfaction of enginer in charge.
Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve sheets/ guide, collect valve, valve spring etc. Notes: Spares as required/listed in this item shall be paid under item No 04 here-in-after.
Labour for repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge. Notes: Spares as required/listed in this item shall be paid under item No 04 here-in-after.
Labour for Grinding & Polishing of crank shaft and making it smooth for new higher size of bearing and all as specifed and directed by enginer in charge. Notes: Spares as required/listed in this item shall be paid under item No 04 here-in-after.
Labour for repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, barrel plunges, injectors etc suitable for 320 KVA DG Set. Notes: Spares as required/listed in this item shall be paid under item No 04 here-in-after.
Labour for assembling of engine after replacement of UNSV/defective parts with new as listed in Srl item No 4 supply only and job work listed against Srl item No 3. Note: All new spare parts and job work shall be measured and paid seperately under respective items.
Supply of spare parts to be replaced/fixed in DG set as in Srl item No 03 here-in-before for replacement of unserviceable spare parts for satisfactory functioning of engine all as specified. Notes: cost of fixing shall be paid against srl item No 03 here-in-before
Cylinder liner with sealing ring
Piston assembly with piston pin complete
Piston ring set
C. R. bearing
C. R. Bushing
Valve guide
Valve insert intake/exaust
Intake valve
Exhaust valve
Valve spring
Valve seat spring
Piston cooling nozzle
Lub oil pump
Oil cooler including gasket
Themostat
Cam bush
Main bearing
Gasket set upper
Gasket set lower
Water pump Assy
Turbo charger Assy
Dismantling/opening of upper portion of diesel engine 200 KVA, Make Greaves Model: 6G11TAG24, water cooled, turbo charged 1500 RPM installed at New Power House and repair/servicing of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete including replacement of unservicable parts and testing of DG set after completion of job as per satisfaction of enginer in charge.
Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve sheets/ guide, collect valve, valve spring etc. Notes: Spares as required/listed in this item shall be paid under item No 06 here-in-after.
Labour for repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge. Notes: Spares as required/listed in this item shall be paid under item No 06 here-in-after.
Labour for Grinding & Polishing of crank shaft and making it smooth for new higher size of bearing and all as specifed and directed by enginer in charge. Notes: Spares as required/listed in this item shall be paid under item No 06 here-in-after.
Labour for repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, barrel plunges, injectors etc suitable for 320 KVA DG Set. Notes: Spares as required/listed in this item shall be paid under item No 06 here-in-after.
Labour for assembling of engine after replacement of UNSV/defective parts with new as listed in Srl item No 6 supply only and job work listed against Srl item No 5. Note: All new spare parts and job work shall be measured and paid seperately under respective items.
Supply of spare parts to be replaced/fixed in DG set as in Srl item No 05 here-in-before for replacement of unserviceable spare parts for satisfactory functioning of engine all as specified. Notes: cost of fixing shall be paid against srl item No 05 here-in-before
Piston assembly
Piston ring set
Liner
Main bearing
Con rod bearing
Set of gasket
O-ring
Set of complete Hose
Set of injector pipe
Head Gasket
Set of fuel flexible pipe
Water pump Assy
Inlet valve
Exhaust valve
Valve seat inlet
Valve seat exhaust
Injector sleeve
Valve collet
Con rod bush
Valve guide
Tappet
Push rod
Turbo charger Assy
Dismantling/opening of upper portion of diesel engine 200 KVA, Make Greaves Model: 6G11TAG24, water cooled, turbo charged 1500 RPM installed at New Power House and repair/servicing of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete including replacement of unservicable parts and testing of DG set after completion of job as per satisfaction of enginer in charge.
Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve sheets/ guide, collect valve, valve spring etc. Notes: Spares as required/listed in this item shall be paid under item No 08 here-in-after.
Labour for assembling of engine after replacement of UNSV/defective parts with new as listed in Srl item No 8 supply only and job work listed against Srl item No 7. Note: All new spare parts and job work shall be measured and paid seperately under respective items.
Supply of spare parts to be replaced/fixed in DG set as in Srl item No 07 here-in-before for replacement of unserviceable spare parts for satisfactory functioning of engine all as specified. Notes: cost of fixing shall be paid against srl item No 07 here-in-before
Piston assembly
Piston ring set
Liner
Set of gasket
O-ring
Set of complete Hose
Set of injector pipe
Head Gasket
Set of fuel flexible pipe
Inlet valve
Exhaust valve
Valve seat inlet
Valve seat exhaust
Injector sleeve
Valve collet
Valve guide
Tappet
Push rod
Dismantling/opening of upper portion of diesel engine 200 KVA, Make Greaves Model: TBD3V6, water cooled, turbo charged 1500 RPM installed at Domestic Power House and repair/servicing of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete including replacement of unservicable parts and testing of DG set after completion of job as per satisfaction of enginer in charge.
Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve sheets/ guide, collect valve, valve spring etc. Notes: Spares as required/listed in this item shall be paid under item No 10 here-in-after.
Labour for repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge. Notes: Spares as required/listed in this item shall be paid under item No 10 here-in-after.
Labour for Grinding & Polishing of crank shaft and making it smooth for new higher size of bearing and all as specifed and directed by enginer in charge. Notes: Spares as required/listed in this item shall be paid under item No 10 here-in-after.
Labour for repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, barrel plunges, injectors etc suitable for 320 KVA DG Set. Notes: Spares as required/listed in this item shall be paid under item No 10 here-in-after.
Labour for assembling of engine after replacement of UNSV/defective parts with new as listed in Srl item No 10 supply only and job work listed against Srl item No 09. Note: All new spare parts and job work shall be measured and paid seperately under respective items.
Supply of spare parts to be replaced/fixed in DG set as in Srl item No 09 here-in-before for replacement of unserviceable spare parts for satisfactory functioning of engine all as specified. Notes: cost of fixing shall be paid against srl item No 09 here-in-before
Piston assembly
Piston ring set
Liner
Main bearing
Con rod bearing
Set of gasket
O-ring
Set of complete Hose
Set of injector pipe
Head Gasket
Set of fuel flexible pipe
Water pump Assy
Intake valve
Exhaust valve
Valve seat inlet
Valve seat exhaust
Injector sleeve
Valve collet
Con rod bush
Valve guide
Tappet
Push rod
Turbo charger Assy
Note : Schedule of Credit Rs. 87680.00 (Rupees Eighty Seven thousand Six hundred eighty only) will be deducted from the total amouont quoted while accepting the bid. Details of Schedule of credit is given in tender documents
national engineering
Hitech Erectors Pvt. Ltd.
Heena Construction Company
HORIZON CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .