Lingala LIS

Excavation and removal of silt or silt mixed with sand in slussy condition from canal bed including disposing off the same in spoil bank or on the canal embankment in layers as directed etc., complete with initial lead upto 50 m and all lifts.for silt removal in sump well

Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external and internal walls. for pump house inside

Painting and writing letter for name board and salient features, inclduing cost paints, labour charges etc., complete for pump house Back ground of Name board

Painting and writing letter for name board and salient features, inclduing cost paints, labour charges etc., complete for pump house Letters on Sailent features board-Ht 20cmx50

Painting and writing letter for name board and salient features, inclduing cost paints, labour charges etc., complete for pump house Letters on Sailent features board-Ht 15cmx100

Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.for stilling basin for stilling basin and pressure main

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. for stilling basin

R.C.C grade M 20 (nominal Mix) using 20 mm Graded Metal (MORTH) for Raft Foundation. for stilling basin

RCC M20 Grade (nominal Mix) using 20 mm Graded Metal for well steining. for stilling basin

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded. for stilling basin

Supply , transport and comissioning of Vaccum pump 1HP, Model:KV20 Monoblock 20X20, Make Kirloskar Brothers Limited

Supply, Transportation and comissioning of of 10.0 HP Three phase Mono block IP44 motor pumpset with head 25M an 22 LPS including labor and other accessories Makes: Texmo / CRI / KSB / Aryan Varsha

Supply and Transportation of control panel for three phase submersible motors for 10 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meterand 0-30A Ammeter, Indication lamps,selector switches, CTS, 32A TP MCB,Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With SS enclouser comprising of contactor with bi-metalic relay with necessary push buttons, etc.,complete suitable Up to 3.0 HP.Makes: Siemens / Crompton / L&T / BCH/ABB

Supply of 100A 415V TPN Rewirable Fuse Switch in SS enclosure.Makes : HPL / Havells / Indo Asian / C&S

Supply of 100A 415V Porcelain Rewirable Fuse Units. Makes : C&S / GM / Sputnik / Kundancab / Million / Gold Medal / Vimal / Star /Benlo.

Supply of 50 Sqmm 3.5 Core XLPE insulated,1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI /Finolex / Payal / RR kable / Beljin /Ollvin / Finecab / RPG / V - Guard / Orbit / Fortune Arrt / Gemscab / Bonton / SPM / Unistar / Windsor/ Avocab / Pawancab / Nakoda / Suncab

Supply of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 50 Sq.mm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department

Supply of 3 core 6 sq mm PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells /Polycab / RPG / KEI / Gloster / V-Guard /Finecab / SPM / Gemini / Unistar /Windsor / Payal / Fortune Arrt / Avocab /Pawancab / Nakoda / HPL / Sudhakar /Bonton / Ollvin

Supply of heavy duty long barrel copper lugs confirming to I.S specifications suitable for up to 16 sq mm cable etc complete with nuts, bolts and washers. Makes: DMI / Jainson / Dowels orequivalent make as approved by the department

Supply of ISI 25mm dia 1.5 mm thick outer dia heavy grade with IS:9537 part 3 rigid PVC pipe.Makes : Sudhakar / Finolex / Modi / VIP /Precision / Universal / Million Plast / Gold / Polycab / DEC / Beljin /Champion / Austro

Supply of 2.5 sq mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specification for Copper cable. Makes : Finolex / RR kabel / Havells /Polycab / Beljin (HFFR) /Ollvin(HFFR) /Finecab Gold (HFFR) / GM(HFFR) / Gold Medal(HFFR) / Million (HFFR) / KEI (HFFR) / V-Guard (HFFR)./ DEC (HFFR) / Bonton (HFFR) and Avocab (HFFR) / Fortune Arrt(HFFR) / SPM (HFFR) / Sudhakar (HFFR) /Nakoda (HFFR) / HPL (HFFR) / GLOSTER(HFFR)

Supply of 6 Modular Cover Frame. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / CabtreeAmare / Logus Platina / Gold Medal GIFA / GM-Zenova/ L&T- Englaze

Supply of 6A 3/2 Pin Mini Modular Socket with Cover Frame.Makes : GM / Anchor / Million / Vimal / Gold Medal / CPL / Great White.

Supply of 6-32A SP MCB10KA, C/D Curve ISI Mark.Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Crabtree.

Supply of 6A 1 Way flush type Switch.Makes : GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry /Great white Omega / HPL / Vimal / CPL.

Supply and transportation of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing madewith alluminium anodised body, wide operating voltage with double side connection, PF≥ .9, Surge protection:> 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500Kas desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic /Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM / Arraystorm / GM / Goldmedal

Supply, Transportation, laying, testing & commissioning of 'B' class heavy duty 200 mm MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes (for suction pipe)

Supply, Transportation, laying, testing & commissioning of 'B' class heavy duty 150 mm MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall / ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes (for delivery)

Manufacture, Supply and delivery of 150mm PN 16 DI D/F Gate Valves (Soft Seated) Resilient seatedsoft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of gradeGGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade qualityand seals of NBR and the valves should be of vacuum tight and 100% leak proof withface to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valvesshould be with Electrostatic powder coating both inside and outside pocket less bodypassage. Drilled as per requirement of the dept.

Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover 150 mm PN 20 Non Return Valve as per IS : 5312 / Part1 /2004. Round body heavy duty material spec. As perIS:1030/1998 with SS Hinge & Seat Rings. excluding transportation etc., complete. Dia in mm.

Supply, Transportation, laying, testing & commissioning of 'B' class heavy duty 25 mm GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes (prime motor to motor connections)

S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

Supply of 6.0 Sqmm FRLSH / HFFR PVCinsulated 1100V grade as per IS:694/1990,IS 17048 specification for Copper cable.Makes : Finolex / RR kabel / Havells /Polycab / Beljin (HFFR) /Ollvin(HFFR) /Finecab Gold (HFFR) / GM(HFFR) / GoldMedal(HFFR) / Million (HFFR) / KEI (HFFR)/ V-Guard (HFFR)./ DEC (HFFR) / Bonton(HFFR) and Avocab (HFFR) / Fortune Arrt(HFFR) / SPM (HFFR) / Sudhakar (HFFR) Nakoda (HFFR) / HPL (HFFR) / GLOSTER(HFFR) For earthing

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B'class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Manufacture, Supply and Delivery of 250 mm 6 kg/cm2 Unplasticised PVCs Pipes for potable water supplies conforming to IS :4985/2000 (3rd revision) with bellends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive oftransportation to the sub-divisional stores anywhere in TG excludingTaxes.

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc.any diameter including fixing necessary fittings like bends, plugs,couplers, junctions, tees, etc. with solvent jointing as per standard practice

Painting to ms pipe with 1base coats of red oxide paint of apporved brand and over 2 coats of anti corrosive bitumen paint before thourughly brushing the surface to remove all dirt and remains of rust, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work.

Manufacture, supply and delivery of Single Chamber 80 mm PN 16 DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept.

Supply, Transportation, laying, testing & commissioning of 'C' class heavy duty 300 mm MS pipe conforming to IS 3589/IS 1239including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required Makes : Jindal Hissar / Tata pipes (for suction pipe)