CONSTRUCTION OF SECURITY FENCEING AROUND AGARTALA

Amount

Grubbing up tree trunk girth exc 30cm but n exc 100cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site

Site clearance soft /Loose soil Complete all as specified and as directed

Excavation in post holes (or similer holes) each n.exc 0.5 Cum getting out, returning filling and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc. 50 m and making good the disturbed surface in hard and dense soil all as specified and as directed.

Material and Labour for plain cement concrete type C2 1:3:6 (using 40mm graded aggregate) as for in foundations, filling and mass concrete post holes for securing angle vertical posts Complete all as specified and as directed.

Supply and fixing framed brackets of angles or tees for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc incl all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165

Supply and fixing Mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as specified and as directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long, diameter of neck 5 to 10 mm

Supply and fixing galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc Complete all as specified and directed (each line wire to be measured).

Supply only chain link MS galvanised fencing any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire Complete all as specified and as directed.

Material and Labour Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed.

Material and Labour Preparation of new steel surfaces of any description, n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed.

Material and Labour Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of black bituminous paint over a coat of red oxide primer Complete all as specified and as directed.

Excavating in trenches not exceeding1.5metre wide and not exceeding1.5 metre in depth and not exc10Sqm on plan in any type of soil and getting out in hard and dense soil Complete all as specified and as directed..

Material and Labour hardcore of broken stone or boulders of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface Complete all as specified and as directed.

Material and Labour for Cement concrete 1:4:8 using 40 mm graded crushed stone aggregates in foundation filling and mass concreteComplete all as specified and as directed.

Material and Labour for 40mm thick cement concrete B-1,1:2:4 (20mm graded agg) as in sub bases and paving etc complete all as specified and as directed.

Material and Labour for Brickwork with bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.

Material and Labour Form work to flat sides of concrete foundation footing base of columns and raft beams sides and soffits (if any) of plinth beams complete all as specified and as directed.

Material and Labour Form work sides of pillars, post struts pier columns square,rectangular or polygonal rough finished surface of concrete complete all as specified and as directed.

Material and Labour RCC type A-1 (1:1.5:3) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and Labour TMT bars(Fe500),10mm dia and over in reinforcement cut to length,bent to shape required incl bending spirally cranking,hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips, all as specified and as directed.

Material and Labour for Rendering 15mm thick in CM 1:4 on fair face of brick work or concrete surfaces finished fair even and smooth w/o using extra cement complete all as specified and as directed.

Returing, filling in (soil) including spreading,levelling,watering and well ramming in layer not exceeding 25cm thick in any type of soil complete all as specified and as directed.

Removal of excavated material(soil)to a distance exc 250 mtr and not texceeding 500 metre and depositing where directed at a level not exceeding1.5mabove the starting point complete all as specified and as directed.

Material and Labour for preparing new plastered surfacesof walls and applying two coats of cement based paint complete all as specified and as directed.

SREE BALAJI ENTERPRISES