Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.1 LAccepted-AOC | L1 | Accepted-AOC .. | |
| 2 | L2Rejected-AOC | L2 | Rejected-AOC .. | |
| 3 | L3Rejected-AOC WARD NO 1 HIRA NAGAR HAMIRPUR HP | L3 | Rejected-AOC . | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 5 | Not Admitted-Fee/PreQual/Technical V P O TEHSIL JAWALAMUKHI DISTT KANGARA HP | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | Shashank Jagota Govt. Contractor L2 | Anirudh Katna L1 | Rishav Katna L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations and trenches (for pipes and pits for other civil structures) upto all depths in all kinds of soil such as pick work, jumper work and saturated soil and paved surfaces including bailing or pumping out of water, chiseling or wedging out of same where blasting is prohibited in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable material/soil separately and after laying jointing and testing of pipes, returning the usable soil in 15 cm layer by ramming and watering and then disposing of all surplus excavated soil/unusable material as directed within all leads and lifts including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects as per the direction of Engineer-in-charge. | 405 | Cum | 401 ₹1,62,405 | 400 ₹1,62,000 Lowest | 425 ₹1,72,125 |
| 2.00Providing, Laying, jointing and testing & Commissioning of GMSERW pipe L-290 or X42 grade confirming to IS 3183:2007 at site in trenches bevelled ended BIS marked PIPE confirming to relevent codes & specification its equivalent latest with up to date ammendments of following dia with steel garde having wall thickness as mentioned below & capable of withstanding required test pressure as prescribed in BIS code , in random lengths of 5.0 to7.0 mtr. The pipe's ends shall be bevelled suitable for but welding , including the cost of jointing with butt welding confirming to IS 816-1969 or latest as appicable and with up to date ammendments (leak proof) in three layers at site of work with welding rods of standard make & all allied accesories whatever required for welding at site, tail piece, tees neds & other specials manufactured from parent pipes as applicable to the particular reach & of approved specifications as per site conditions and cutting of pipes wherever required as per site requirement i/c cariage in all leads & lifts as directed by Engineer-incharge. The pipe shall have zinc coating inside & outside confirming to IS 4736-1986 or latest with up to date ammendments & shall be engraved with IS 3183:2007 for GGMSERW pipe . The laying shall confirm to BIS 5822-1970 or latest with up to date ammendements to teh entire satisfaction of Engineer-Incharge (Earthwork ,Butt welded Joint & cost of MS flanged joints shall be measured & paid for seperately). | ||||||
| 2.10 | 200 mmGMSERW Pipe IS/ISO:3183-2007 L290 or X 42 (4.80 mm thick) | 750 | Rmt | 5,210 ₹39,07,500 | 5,200 ₹39,00,000 Lowest | 5,250 ₹39,37,500 |
| 3.00Providing and welding M.S. flanges @ 5% of joints, conforming to following tables as per IS 6392-1971 (Latest with upto date amendments) with plain end GMS/GMSERW pipe in requsite number of layers on both faces (i.e 2 layers on outer face and 1 layer inner face )to make the joint leak proof (The cost of providing and laying of GMSERW pipes to be measured and paid for seprately). The welding of flanges should conform to IS:816-1969 with electrodes as per IS: 814-1991 and required number of nuts and bolts conforming to IS 1364. including cost of gasket sheet nuts & bolts. The thickness of gasket sheet not less then 3.00mm conforming to IS 2712-1998. The work shall be done to the entire satifaction of engineer in charge with in all leads and lifts. | ||||||
| 3.10 | M.S. Flange 200 mm dia Table-11 | 3 | Pair | 6,000 ₹18,000 | 5,000 ₹15,000 Lowest | 6,000 ₹18,000 |
| 3.20 | M.S. Flange 200 mm dia Table-17 | 5 | Pair | 6,000 ₹30,000 | 5,500 ₹27,500 Lowest | 6,500 ₹32,500 |
| 4.00Providing circumferential butt welded joints by electrical arc welding to GGMSERW pipe grade L-290 or X42 as per IS 3183:2012, welded in three number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerilikon (Adore)-CITOJET/ES/ESAB make,conforming to IS 814-1991, including Die pentration test, including fabrication ,laying & jointing requisite number of GMSERW/GMS bends at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | ||||||
| 4.10 | 200 mm dia | 119 | Joint | 1,750 ₹2,08,250 Lowest | 1,800 ₹2,14,200 | 2,000 ₹2,38,000 |
Tender Value
₹37.4 L
EMD Value
₹74,722
Closing Date
5 May 2026, 11:00 amClosed
EE
JSV Division Nadaun
Providing lift Irrigation Scheme to Village Tailkar Bharial Sanahi Kallan and Sanahi Khurd From Kunah Khad in Tehsil Nadaun, District Hamirpur (HP)
2026_HPIPH_135277_1
JS-NDN-CB-Misc.Agr/2026-27/-
Open Tender
Civil Works
Item Rate
180 days
Nadaun area
Excavation, Providing, laying, jointing and testing of GMSERW 200mm dia for Rising main at RD 600 To 1350 Rmt and 2nd stage 750Rmt
8 documents required · 8 mandatory
₹2,000
EE Nadaun
₹74,722
22 Oct 2026
29 Apr 2026
5 May 2026
29 Apr 2026
5 May 2026
29 Apr 2026
29 Apr 2026 - 5 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations and trenches (for pipes and pits for other civil structures) upto all depths in all kinds of soil such as pick work, jumper work and saturated soil and paved surfaces including bailing or pumping out of water, chiseling or wedging out of same where blasting is prohibited in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable material/soil separately and after laying jointing and testing of pipes, returning the usable soil in 15 cm layer by ramming and watering and then disposing of all surplus excavated soil/unusable material as directed within all leads and lifts including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects as per the direction of Engineer-in-charge. | 405 | Cum | 1.25 | ₹506.25 |
| 2Providing, Laying, jointing and testing & Commissioning of GMSERW pipe L-290 or X42 grade confirming to IS 3183:2007 at site in trenches bevelled ended BIS marked PIPE confirming to relevent codes & specification its equivalent latest with up to date ammendments of following dia with steel garde having wall thickness as mentioned below & capable of withstanding required test pressure as prescribed in BIS code , in random lengths of 5.0 to7.0 mtr. The pipe's ends shall be bevelled suitable for but welding , including the cost of jointing with butt welding confirming to IS 816-1969 or latest as appicable and with up to date ammendments (leak proof) in three layers at site of work with welding rods of standard make & all allied accesories whatever required for welding at site, tail piece, tees neds & other specials manufactured from parent pipes as applicable to the particular reach & of approved specifications as per site conditions and cutting of pipes wherever required as per site requirement i/c cariage in all leads & lifts as directed by Engineer-incharge. The pipe shall have zinc coating inside & outside confirming to IS 4736-1986 or latest with up to date ammendments & shall be engraved with IS 3183:2007 for GGMSERW pipe . The laying shall confirm to BIS 5822-1970 or latest with up to date ammendements to teh entire satisfaction of Engineer-Incharge (Earthwork ,Butt welded Joint & cost of MS flanged joints shall be measured & paid for seperately). | |||||
| 2.1 | 200 mmGMSERW Pipe IS/ISO:3183-2007 L290 or X 42 (4.80 mm thick) | 750 | Rmt | 1.25 | ₹937.5 |
| 3Providing and welding M.S. flanges @ 5% of joints, conforming to following tables as per IS 6392-1971 (Latest with upto date amendments) with plain end GMS/GMSERW pipe in requsite number of layers on both faces (i.e 2 layers on outer face and 1 layer inner face )to make the joint leak proof (The cost of providing and laying of GMSERW pipes to be measured and paid for seprately). The welding of flanges should conform to IS:816-1969 with electrodes as per IS: 814-1991 and required number of nuts and bolts conforming to IS 1364. including cost of gasket sheet nuts & bolts. The thickness of gasket sheet not less then 3.00mm conforming to IS 2712-1998. The work shall be done to the entire satifaction of engineer in charge with in all leads and lifts. | |||||
| 3.1 | M.S. Flange 200 mm dia Table-11 | 3 | Pair | 1.25 | ₹3.75 |
| 3.2 | M.S. Flange 200 mm dia Table-17 | 5 | Pair | 1.25 | ₹6.25 |
| 4Providing circumferential butt welded joints by electrical arc welding to GGMSERW pipe grade L-290 or X42 as per IS 3183:2012, welded in three number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerilikon (Adore)-CITOJET/ES/ESAB make,conforming to IS 814-1991, including Die pentration test, including fabrication ,laying & jointing requisite number of GMSERW/GMS bends at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | |||||
| 4.1 | 200 mm dia | 119 | Joint | 1.25 | ₹148.75 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.16 MB
form08.pdf
Tender Documents • 1.15 MB
TermsCondit.pdf
Tender Documents • 0.30 MB
BOQ_200351.xls
BOQ • 0.29 MB
form6.pdf
Tender Documents • 0.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .