REPAIR REPLACEMENT MAINT REROUTING OF CI DI GI DISTRIBUTION SYSTEM INCLUDING CONNECTING ITEMS AT OLD VRC NEW VRC IHQ DGIS AND 1CBPO AREA AT AGE E M III UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Excavation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr deep for pipe line in soft/loose soil, getting out and levelling of bottom surface complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

Boring holes under road pavement by bocky manually, in any type of soil upto 200 mm bore Complete all as specified and as directed.

Taking up or down GI steel tubing 15 mm bore with connections above or below ground complete all as specified and as directed.

Taking up or down GI steel tubing 20 mm bore with connections above or below ground complete all as specified and as directed.

Taking up or down GI steel tubing 25 mm bore with connections above or below ground complete all as specified and as directed.

Taking up or down GI steel tubing 40 mm bore with connections above or below ground complete all as specified and as directed.

Taking up or down GI steel tubing 50 mm bore with connections above or below ground complete all as specified and as directed. Note for srl No 6 to 10

Relaying or fixing of GI steel tubing 15 mm bore retrieved from srl ite No 5 here- in-before in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Relaying or fixing of GI steel tubing 20 mm bore retrieved from srl ite No 6 here- in-before in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Relaying or fixing of GI steel tubing 25 mm bore retrieved from srl ite No 7 here- in-before in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Relaying or fixing of GI steel tubing 40 mm bore retrieved from srl ite No 8 here- in-before in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Relaying or fixing of GI steel tubing 50 mm bore retrieved from srl ite No 9 here- in-before in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Laying / fixing only of GI steel tubing 15 mm bore in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Laying / fixing only of GI steel tubing 20 mm bore in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Laying / fixing only of GI steel tubing 25 mm bore in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Laying / fixing of GI steel tubing 40 mm bore in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed.

Laying or fixing of GI steel tubing 50 mm bore in old or new position as in walls or ceiling/ trenches/floors with necessary fixing arrangements etc with and including providing new GI fittings complete all as specified and as directed. Notes for srl No 15 to 19 :- (i) Excavation & earth work shall be measured & paid separetely. (ii) GI steel tubing shall be issud under Sch 'B' as free for laying/fixing only

Taking up Cast Iron /Ductile Iron/GI water mains 100 mm bore including all fittings with spigot & socket ends of lead/tyton joints including burning out lead joints and recovering lead complete all as specified and as directed.

Taking up Cast Iron /Ductile Iron water mains 150 mm bore including all fittings with spigot & socket ends of lead/tyton joints including burning out lead joints and recovering lead complete all as specified and as directed.

Taking up Cast Iron /Ductile Iron water mains 200 mm bore including all fittings with spigot & socket ends of lead/tyton joints including burning out lead joints and recovering lead complete all as specified and as directed. Note for srl No 20 to 22 :- Excavation & earth work shall be measured & paid separetely.

Supplying, laying, jointing & commissioning DI pipe 100 mm bore, as per IS-8239, class K-7 with inside cement mortar lining , spigot & socketed ends, laid in trenches, in new or old location with & including DI fittings with rubber gasket joints complete all as specified and as directed.

Supplying, laying, jointing & commissioning DI pipe 150 mm bore, as per IS-8239, class K-7 with inside cement mortar lining , spigot & socketed ends, laid in trenches, in new or old location with & including DI fittings with rubber gasket joints complete all as specified and as directed.

Supplying, laying, jointing & commissioning DI pipe 200 mm bore, as per IS-8239, class K-7 with inside cement mortar lining , spigot & socketed ends, laid in trenches, in new or old location with & including DI fittings with rubber gasket joints complete all as specified and as directed. Notes for srl No 23 to 25 :- (i) Excavation & earth work for new locations shall be measured & paid separetely. (ii) Tyton joints shall be measured and paid seperately. (iii) Fittings, if any, shall be measured & paid separetely

Supplying and fixing in replacement DI fittings/specials such as Tees, bends ,any type, radius and angle/ tapers any type, collars,tail pieces,caps and plugs up to 200 mm bore confirming to IS: 9523 complete all as specified and as directed.

Supplying and fixing in replacement CI fittings/specials such as Tees, bends ,any type, radius and angle/ tapers any type, collars,tail pieces,caps and plugs 200 mm bore confirming to IS: 9523 complete all as specified and as directed. Note for srl No23 to 25 :- Tyton joints shall be measured and paid seperately.

Supply and fixing Gun metal gate valve in replacement, 15 mm bore with iron wheel head screwed both ends for ron pipe as per IS-778 complete all as specified and as directed.

Supply and fixing Gun metal gate valve in replacement, 20 mm bore with iron wheel head screwed both ends for ron pipe as per IS-778 complete all as specified and as directed.

Supply and fixing Gun metal gate valve in replacement, 25 mm bore with iron wheel head screwed both ends for ron pipe as per IS-778 complete all as specified and as directed.

Supply and fixing Gun metal gate valve in replacement, 40 mm bore with iron wheel head screwed both ends for ron pipe as per IS-778 complete all as specified and as directed.

Supply and fixing Gun metal gate valve in replacement, 50 mm bore with iron wheel head screwed both ends for ron pipe as per IS-778 complete all as specified and as directed.

Supply only lead pig bar complete all as specified and as directed.

Supply only Spun yarn

Material and labour for run lead joint including jointing material for 100 mm bore CI/DI pipe complete all as specified and as directed.

Material and labour for run lead joint including jointing material for 150 mm bore CI/DI pipe complete all as specified and as directed.

Material and labour for run lead joint including jointing material for 200 mm bore CI/DI pipe complete all as specified and as directed. Note for srl item Nos 41 to 44 : - (i) Excavation & earth work measured & paid seperetely. (ii) Lead and Spun yarn paid under relevant items

Supply only 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed. Note for srl No 6 to 65 :- The rate for taking down/out existing fittings & fixtures as existing at site and refixing to make it functional shall be taken into account under srl item Nos 1 & 2 here-in-before.

Supplying, fixing, jointing & testing cast Iron Sluice Valve 80 mm bore, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unserviceable sluice valve complete all as specified and as directed .

Supplying, fixing, jointing & testing cast Iron Sluice Valve 100 mm bore, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unserviceable sluice valve complete all as specified and as directed .

Supplying, fixing, jointing & testing cast Iron Sluice Valve 150 mm bore, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unserviceable sluice valvecomplete all as specified and as directed .

Supplying, fixing, jointing & testing cast Iron Sluice Valve 200 mm bore, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unserviceable sluice valve complete all as specified and as directed .

Supply and fixing 80 mm bore Cast Iron foot valve flanged ends, swing type opration with rubber sheet, as per IS : 4038 including taking out unserviceable foot valve complete all as specified and as directed .

Supply and fixing 100 mm bore Cast Iron foot valve flanged ends, swing type opration with rubber sheet, as per IS : 4038 including taking out unserviceable foot valve complete all as specified and as directed .

Supply and fixing 150 mm bore Cast Iron foot valve flanged ends, swing type opration with rubber sheet, as per IS : 4038 including taking out unserviceable foot valve complete all as specified and as directed . Note for srl item No 73 to 75 :- Flanged joints with jointing material shall deemed to be included in the quoted unit rates.

Supplying, fixing, jointing and testing cast iron non return valve 80 mm bore without by pass arrangement , swing type, confirming to IS- 5312, flanged ends pressure rating PN-1.0 complete including taking out unserviceable NRV complete all as specified and as directed .

Supplying, fixing, jointing and testing cast iron non return valve 100 mm bore without by pass arrangement , swing type, confirming to IS- 5312, flanged ends pressure rating PN-1.0 complete including taking out unserviceable NRV and depositing to MES store yard complete all as specified and as directed .

Supplying, fixing, jointing and testing cast iron non return valve 150 mm bore without by pass arrangement , swing type, confirming to IS- 5312, flanged ends pressure rating PN-1.0 complete including taking out unserviceable NRV complete all as specified and as directed . Note for srl item No 77 & 78 :- Flanged joints with jointing material shall deemed to be included in the quoted unit rates.

Supplying, fixing, jointing and testing cast iron Air release valve 80 mm bore with two air outlets, confirming to IS , flanged ends complete including taking out unserviceable ARV and depositing to MES store yard complete all as specified and as directed .

Supplying, fixing, jointing and testing cast iron Air release valve 100 mm bore with two air outlets, confirming to IS , flanged ends complete including taking out unserviceable ARV complete all as specified and as directed

Cutting and screwing the existing steel tubing 15 mm bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

Cutting and screwing the existing steel tubing 20 mm bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

Cutting and screwing the existing steel tubing 25 mm bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

Cutting and screwing the existing steel tubing 40 mm bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

Cutting and screwing the existing steel tubing 50 mm bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

Opening of existing sluice valve 80 mm bore including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note :- Any new spare parts like stem, stem nuts, gland plate of required size shall be measured and paid separately under respecitve items.

Opening of existing sluice valve 100 mm bore including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note :- Any new spare parts like stem, stem nuts, gland plate of required size shall be measured and paid separately under respecitve items.

Opening of existing sluice valve 150 mm bore including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note :- Any new spare parts like stem, stem nuts, gland plate of required size shall be measured and paid separately under respecitve items.

Opening of existing sluice valve 200 mm bore including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note :- Any new spare parts like stem, stem nuts, gland plate of required size shall be measured and paid separately under respecitve items.

Supply only stem nut made out of stainless steel suitable to match with existing sluice valve 80 mm bore complete all as specified and as directed.

Supply only stem nut made out of stainless steel suitable to match with existing sluice valve 100 mm bore complete all as specified and as directed.

Supply only stem nut made out of stainless steel suitable to match with existing sluice valve 150 mm bore complete all as specified and as directed.

Supply only stem nut made out of stainless steel suitable to match with existing sluice valve 200 mm bore complete all as specified and as directed.

Supply only stem made out of stainless steel suitable to match with existing sluice valve 80 mm bore complete all as specified and as directed

Supply only stem made out of stainless steel suitable to match with existing sluice valve 100 mm bore complete all as specified and as directed.

Supply only stem made out of stainless steel suitable to match with existing sluice valve 150 mm bore complete all as specified and as directed.

Supply only stem made out of stainless steel suitable to match with existing sluice valve 200 mm bore complete all as specified and as directed.

Supply only gland plate made of cast iron suitable to match with existing sluice valve 80 mm bore complete all as specified and as directed.

Supply only gland plate made of cast iron suitable to match with existing sluice valve 100 mm bore complete all as specified and as directed.

Supply only gland plate made of cast iron suitable to match with existing sluice valve 150 mm bore complete all as specified and as directed.

Supply only gland plate made of cast iron suitable to match with existing sluice valve 200 mm bore complete all as specified and as directed.

Testing of drinking water collected from local source (to be collected from Different Blocks as diredted by Engr-in-Charge) in the area of AGE(U) W/S No.III and submission of detailed test report to the office of AGE(U) No III (i) Carrying out minimum essential testing of water as per IS 10500-2012 mandatory for chemical colour, odour, taste, turbidity, PH value, TDS total hardness, iron, chloride, fluoride and residual free chlorine and Bacteriological total coliform organisms per 100 ml (MPN) and E Coli in 100 ml) with specific recommendation regarding suitability of water for drinking purposes. (ii) Collection of water from different sources of water ie. Sump, bore wells & shallow well in a sterilized bottle and testing in NABL Approved laboratory as mentioned in specification Note :- Rate Quoted shall also deemed to be included for the followings:- (i) Cost of sterilized bottle as required. (ii) To and fro transportation charges for collection of samples from source (Blocks in Shankar vihar Area)

Material and labour for Rubber Gasket Joint (Tyton Joint) for 100 mm bore DI/CI pipe including jointing material complete all as specified and as directed.

Material and labour for Rubber Gasket Joint (Tyton Joint) for 150 mm bore DI/CI pipe including jointing material complete all as specified and as directed.

Material and labour for Rubber Gasket Joint (Tyton Joint) for 200 mm bore DI/CI pipe including jointing material complete all as specified and as directed.

Supplying and fixing Digital liquid water level monitor/controller with inovate PIEZO-RESISTIVE linear sensor, non ambiguous display 3 x 1/2 digit (1999 count max) unit option any two of cm,ltrs,percent(%) resolution 0.1 for % and One cm upto 20 mtrs deep tank DATUM level adjustable, power 10-14 VDC ( 5 watts),temp 0.55 degree celcius, relay No 230 VAC, 6 Amp, sensor to tripod to make it fully serviceable/functional by renewal of defective parts, for semi under ground sump after taking down/out as existing at site complete all as specified and as directed. Make :- IPC model IPCDLLMS/SECO or equivalent as approved.

An amount of Rs 171795.00 shall be deducted from BOQ on account of schedule of credit

Ridhi engineers and builders

Rahul Enterprises

V.K. Enterprises

triveni enterprises

Microsys Controls India

S S CONSTRUCTION

M/S PRADEEP ENTERPRISES