Repair works to the N/E Room, Panel Room and Switch Gear Room at 15.50 m level in Unit IV

Providing working plat form for undertaking rectification works with MS pipe clamps C.W planks, Nails including cost of the materials, lead, lift, labour etc., complete.

Dismantling the existing false ceiling with careful removal of Thermocoal aluminium grid of L and T angle the in its position including cost of all materials, labour, Lead, lift etc., complete.

Chipping the existing concrete and roughening the surface for future bonding and thorough cleaning the surface including cost of all materials, labours, lead, lift, curing, etc. complete.

Plastering with C.M.1:3, 12 mm thick for RCC works with Nitobond AR mixed in cement mortar at 250ml/bag of cement including cost of all materials, labours, lead, lift, hacking the area, curing, etc. complete.

Plastering with CM 1:5, 12mm thick including cost of all materials, labour, lead, lift etc., complete.

Providing false ceiling with Thermocool 25mm thick over the Aluminium section 25x25x1.6mm (T & L angle) with 50cm c/c in one direction 100cm c/c in another direction with 6mm dia M.S. rod as stiffner at a distance of 1.25m c/c including cost of all materials, labour, lead, lift, scaffolding charges etc., complete.

Dismantling the existing damaged windows glazed including removal of frames, hinges & fastenings, including cost of all materials, labours, lead, lift, devolution to stores, etc. complete.

Providing and fixing in position of new anodised aluminium windows of approved manufacture with aluminium 65x38x2.50 mm as main outer frame and inner frame with section 62x30x1.50 mm for top sides and bottom and shutter frame with section 39x19x1.50 mm for vertical plain inter lock and bottom etc including all fittings/ fixture confirming torelevant IS to ensure smooth operation and glazed with 4 mm plain glass panels as sliding type as per instructions of site Engineer, rubber lining with standard hardwares such as special wheel maruthilock 'U' Rubber beading screws, join cleats etc., including cost of all material, lead lift, transporting including the dismantling existing broken glasses and damaged aluminium shutter from the window and devoluting the same to the stores etc., complete.

Painting two coats with ready mixed enamel paint for the old steel surface including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete

Providing two coats with ready mixed plastic emulsion (interior walls) of first class quality paint & approved colour cost of all materials, labours, lead, lift, etc. complete.

Painting two coats with ready mixed Epoxy primer and Epoxy Hardener paint for the old (inner wall) surface including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc. complete

Phoenix Engineering Enterprises