GE 874/EWS-49/2022-23

Amount

B/R Portion

Dismantling of RCC post or struts of any description and in any postion including taking out embedded portion in natural ground and making good the distrubed surfaces to match with existing surfaces complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces, applied in two layers i.e. Ist layer of 10 mm thick in CM (1:6 ) and 2nd ( top ) layer of 5 mm thick in CM (1:4 ) mixed with WPC finished even and smooth (without using extra lime or cement) including taking down existing cement plaster of any description & position, racking out joints, hacking for key,scrubbing down with water etc complete all as specified and directed. (Note:- WPC shall be measured and paid seperately.)

Excavating in posts holes (or similar holes) in any type of soil each n.exc 0.50 cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm complete all as specified and directed.

M&L for providing PCC (1:4:8) type D2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc. complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20mm and 12.5 mm graded stone aggregate ) exc 10cm in width and set and jointed in Cement Mortar (1:6) complete all as specified and directed.

M&L block masonry except solid blocks of PCC of any description, set and jointed in Cement Mortar (1:6) complete all as specified and directed. Note- Blocks obtained in serviceable condition from dismantling shall be used in the work.

M&L PCC (1:3:6) Type C1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed etc. complete with joints to match complete all specifed and directed.

M&L PCC type C-2 (1:3:6) using 40mm graded stone agg. as in surface channel and drain Complete all as specified and directed.

M&L PCC type C-2(1:3:6) using 40mm graded stone agg. as in foundation filling and mass concrete complete all as specified and directed.

M & L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement motar 1:4 complete including Demolition of old brick work complete all as specified and directed.

M&L PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggreate) as in coping including necessary forwork weathering, slightly rounded or chamfered angles as directed.

S&F Galvanised 2 strand, steel barbed wire with 2.24mm dia barbed and with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all specifed and directed.

S&F in Repair galvanised 2 strand steel barbed wire with 2.24mm dia barbed and with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing and tying at crossings with and provisions of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all specifed and directed.

Dismantling chain link fencing & fencing wire mesh any type fixed in any situation & position including flat iron MS round bars, mounted on nuts & bolts etc complete all as specified.

S&F 4mm dia galvanised steel wire chain link fencing including line wires, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all specifed and directed.

Fixing only chain link fencing including line wires, any type of standards, rails, straining bolts, etc.including provission of binding wire any position complete all as specified and directed.

Dismantling concertina coil fencing with punched tape carefully of any dia, opanable length any type fixed in any situation & position nuts & bolts etc complete all as specified.

Fixing only Concertina coil of any dia ie. between 300 to 1100mm fencing including line wires, straining bolts, etc. including provission of binding wire any position all as specified and directed.

S&F in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10m opanable length ( total length 90m) having 50 nos rounds per 6 m length, up to 3.0m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tired with G.I. stapels and G.I. clips to retain horizontal, including necessary boldts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed wire tape (R.B.T)/spring core (2.5 mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52 mm thick and weight 43.478 gm/metre (cost of M.S. angle, CC Blocks shall be paid separately).

M&L Mild Steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling, bolting or rivetting, etc., and similar work conforming to Fe 410 -O of Fe 310 -O grade including providing two coats of synthetic enamel paint alround over and including one coat of red oxide complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 10cm but n.exc 20cm long and dia of neck 11 to 16 mm complete all as specified and directed.

S&F Mild steel 1.25mm thick- plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) on concrete/ fair surfaces of block masonary, finished even and smooth without using extra cement with and including mixing WPC as per manufactureres instructions complete all as specified and as directed. -( Note- WPC shall be measured and paid for seperately )

Supply only Integral water proofing compound

M&L for preparation of newly plastered sufaces of walls & applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered sufaces of walls & applying one coat of cement base paint including cleaning, washing complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls with Acrylic Smooth exterior emmelsion paint of required shade with Silicone additives of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

All as per item above but on old surface of wall complete all as specified and directed.

M&L preparation of old plastered surface of wall & applying one coat of white wash complete all as specified.

Preparing old decorated plastered or unplastered surfaces of walls including washing, rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion paint, white or tinted complete all as specified and directed.

Preparing old decorated plastered or unplastered surfaces of walls including washing, rubbing down and stopping of dietempered surfaces and applying two coat of distemper oil emulsion paint, white or tinted complete all as specified and directed.

M&L for applying 2mm thick wall care putty on wall as reqd. complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) any description / position not otherwise specifically provided complete all as specified.

M&L RCC concrete M-25 (design mix) using 20mm graded stone aggregate in foundation, foundation beams, plinth beam, bases for columns, basement slabs etc complete all as specified and directed.

M&L RCC concrete M-25 (design mix) using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

Mild steel round bars 8mm dia and over upto and including 10mm dia Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde E-165) in stirrups, spacers and binders incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

S&F Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L for preparation of steel Surfaces of any description, over 10cm in width or girth,& applying two coats of synthatic enamal paint complete all as specified and as directed.

M&L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), wherever required complete as in floors/ paths/ pavings etc, complete all as specified and directed.

M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand wherever required etc. complete all as specified and directed.

Demolition of old existing Stone slabs and tiles / paver block of any description or thickness in floors, aprons etc.

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate), 75 mm thick, as in sub base for floor finished even and rough complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n.exc 1.5 m in depth & getting out in any type of soil.

Returning, filling in, inculding spreading, levelling, watering & well ramming in layers n exc 25 cm with any tpye of soil.

Removing excavated material n.exc 50 m and deposting where directed at all level n.exc 1.50 m above the starting point all as directed.

M&L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed face beds and joints of random rubble walling uncoursed or brought upto course surface n.exc. 40mm in granite or trap stone complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ trench etc.

M&L flush pointing of random rubble stone masonry in CM 1:4, uncorsed or brought upto courses.

Demolition of cement concrete (Unreinfoced) of any description and in any position not otherwise specifically provided for complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

All as per item above but plain sheet as in roof covering /cladding to wall fixed with tapping screws.

S&F Mild Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 Grade St.-240 FE-410.

M&L for preparation of old steel Surfaces of any description, over 10cm in width or girth, & applying one coats of synthatic enamal paint complete all as specified and as directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L Glazed ceramic colour tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile on 10mm thick screed in CM 1:4 complete all as specified and directed.

M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for chequered cement concrete tiles 25cm X 25cmX22mm or (300x300x22mm ) thick which is available as per direction of GE/ Engineer -in - charge , set & jointed, poied in neat cement slurry in floor with gray cement and pigment over cement screed 15mm thick in Cement Mortar 1:6 complete all as specified and directed.

M&L 20mm thick Granite (of any type) machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) laid over 15 mm thick screed layer in cement mortar 1:6 complete all as specified.

M/S SAJAA CONSTRUCTION COMAPNY

M/s BEECO CONSTRUCTIONS

Bidder Name

M/S RJ BUILDERS

M/S SAJAA CONSTRUCTION COMAPNY

M/s BEECO CONSTRUCTIONS