Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC PLOT NO 4 SUDARSHAN ROW RESIDENCY GAWADE MALA PIPELINE ROAD SAVEDI AHMEDNAGAR 414003 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414003 | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹49.6 L+₹4.4 L (9.71%)Rejected-AOC 1101 A WING SACHDEV COMPLEX JANGAL MANGAL RAOD BHANDUP W MUMBAI 400078 | MUMBAI SUBURBAN | MAHARASHTRA | 400078 | L2 | Rejected-AOC BEING L2 BIDDER | |
| 3 | Rejected-Technical 01 18 19 ANANDVAN ROW HOUSE LAM ROAD NASHIK ROAD NASH IK ROAD SAUBHAGYA NAGAR NASHIK MAHARASHTRA 422101 | NASHIK | MAHARASHTRA | 422101 | - | Rejected-Technical NOT RECOMMENDED FOR OPENING OF BID DUE TO ADVERSE REMARKS IN HQ CEEC WLR QE SEP 2022 | |
| 4 | Rejected-Technical HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | - | Rejected-Technical NOT RECOMMENDED FOR OPENING OF BID DUE TO ADEQUATELY LOADED |
Tender Value
₹60 L
EMD Value
₹1.1 L
Closing Date
1 Feb 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2022_MES_572095_1
86892/E8
Open Tender
Civil Works
Item Rate
270 days
DEOLALI
AS PER NIT
7 documents required · 7 mandatory
₹1,000
Yes
GE DEOLALI
₹1.1 L
Yes
23 Feb 2023
30 Dec 2022
2 Feb 2023
30 Dec 2022
1 Feb 2023
19 Jan 2023
31 Dec 2022 - 10 Jan 2023
Amount
Excavation in trenches not exc.1.5 m wide and not exc 1.5 m depth for taking out and laying of water pipe line and getting out in soft/loose soil complete all as specified and directed.
All as per item No 1 above but in hard/dense soil.
Returning filling in trenches including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as directed.
Removing of excavated material not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
Taking up existing CI pipe lines from exacavated trenches including removing/burning of lead joints for the following sizes:-
80mm bore
100mm bore
150mm bore
200 mm bore
250 mm bore
300 mm bore
Material and labour for CI spun pipes centrifugally cast Class LA suitable for tyton joint (rubber ring ) of the following sizes complete all as specified and all as directed :-
300 mm bore
250 mm bore
200 mm bore
150 mm bore
100 mm bore
80 mm bore
Taking up or down steel tubing and connection from excavated trenches or in walls or in floor etc 15 mm bore complete.
All as per Srl item No 7 above but 20 mm bore
All as per Srl item No 7 above but 25 mm bore
All as per Srl item No 7 above but 40 mm bore
All as per Srl item No 7 above but 50 mm bore
All as per Srl item No 7 above but 80 mm bore
All as per Srl item No 7 above but 100 mm bore
Supply , lay, connect and test GI tubing 20 mm bore medium grade ISI marked with all fittings laid in trenches etc complete all as specified and as directed.
Ditto- all as per item No 14 above but of 25 mm bore
Ditto- all as per item No 14 above but of 40 mm bore
Ditto- all as per item No 14 above but of 50 mm bore
Ditto- all as per item No 14 above but of 80 mm bore
Ditto- all as per item No 14 above but of 100 mm bore
Supply , lay, connect and test GI tubing 15mm bore medium grade ISI marked with all fittings and fixed complete walls and ceilings or laid in floors etc complete all as specified and as directed.
Supply and fixing in repair 50 mm bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe
Ditto- all as per item No 21 above but 40 mm bore
Ditto- all as per item No 21 above but 25 mm bore
Ditto- all as per item No 21 above but 20 mm bore
Ditto- all as per item No 21 above but 15 mm bore
Cutting existing road surface i.e.surfacing WBM soiling any type of soil etc and making suitable trench of minimum 100mm x 60 cm deep along the cross section of road for laying GI/CI Pipe, returning refilling, filling and well ramming and removal of surplus surface soil to a distance not excedding 50 m and repair to road surface to match the existing specifications complete.
Cutting existing CI/GI distribution main in position for taking out branch/tapping connection of up to 300 mm bore etc.
Supply & fix in repair mechanical joint ( CID joint) of following sizes:-
80mm bore
100mm bore
150mm bore
200mm bore
300mm bore
Supply and fix in repair/ installation and testing of cast iron sluice valve,heavy duty class-I, ISI marked, conforming to I S 14846, long body type, pressure type PN-1.6, flanged ends and drilled having brass steel spindle with iron head wheel at the top complete with and including nuts, bolts, washer, rubber gasket and jointing complete all as specified and directed of following sizes:-
80mm bore
100mm bore
150mm bore
200mm bore
250mm bore
300mm bore
Labour only for burning out lead joint in position including removing of old lead complete all as directed for the following sizes of pipes:-
80mm bore
100mm bore
150mm bore
200mm bore
300mm bore
Material and labour for run lead joint including spun yarn and caulking complete all as directed for the following sizes of spigot and socket pipes :-
80mm bore
100mm bore
150mm bore
200mm bore
300mm bore
Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 80mm dia.complete all as specified and as directed.
Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 100mm diacomplete all as specified and as directed..
Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 150mm diacomplete all as specified and as directed..
Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 200mm diacomplete all as specified and as directed..
Material and labour for rubber ring tyton joint suitable for CI cast iron cenrtigugally cast socket and spigot end pipe of 300 mm dia complete all as specified and as directed.
M&L for Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y"junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 200 mm to 300mm.
Taking out the existing unserviceable NRV of any make/model and supply and fix new NRV ( ISI Mark)of CI body threaded/flanged end, drilled of both ends of PN-1 flap type without by pass arragement all as required at site including nut/bolts and fixing in position including provn of rubber gasket nut bolt etc all as specified and directed by Engr-in-Charge of the following sizes:-
300 mm bore
Construction of valve chamber with brick masonry in CM 1:6 of size 1200mm x 1200mmx 1200 mm(Internal diamension) with 15 cm thick PCC foundation in PCC 1:4:8 type D2 using ( 40 mm graded stone agreegrate ) 15 mm thick plaster in CM 1:6 , 3 mm thk MS sheet cover including 40x40x6 mm MS angle iron frame fixed in PCC coping made out with PCC 1:2:4 type B1 using ( 20 mm graded stone agreegate ) with neccessary locking arrangement and painted with two coats of synthetic enamel paint over a coat of red oxide primer on all exposed surfaces steel including necesary excavation and earth work in any type of soil , returning and filling in and raming and removal of surplus spoil and demolition of existing valve chamber all as specifieed and directed by Engineer-in-charge.
Construction of valve chamber with brick masonry in CM 1:6 of size 900mm x 900mmx 900 mm(Internal diamension) with 15 cm thick PCC foundation in PCC 1:4:8 type D2 using ( 40 mm graded stone agreegrate ) 15 mm thick plaster in CM 1:6 , 3 mm thk MS sheet cover including 40x40x6 mm MS angle iron frame fixed in PCC coping made out with PCC 1:2:4 type B1 using ( 20 mm graded stone agreegate ) with neccessary locking arrangement and painted with two coats of synthetic enamel paint over a coat of red oxide primer on all exposed surfaces steel including necesary excavation and earth work in any type of soil , returning and filling in and raming and removal of surplus spoil and demolition of existing valve chamber all as specified and directed by Enginee-in-charge.
Supply and fixing Cast Iron Air Release valve with double air outlets conf to IS 14845 of size 80 mm dia and fixing up to cast iron water supply mains complete including nut, bolt, washers and gasket etc all as directed by Engineer-in-Charge
Locate the any kind of fault in water pipe line of any size and any type by digging only with JCB along the length of any type of water pipe line and upto the depth from 1.5 to 3.0 m as required at site in any tye of soil of water pipe line bottom to locate the exact pin point location of fault including rectification of fault with the help of plumber, returning filling of same by tightining the union, replaceing of elbows, scoets, tees, nipple, checknut etc complete all as directed by Enge-in-charge. Note : The items required to replace shall be measured and paid separately under the relevent items of the schedule.
Removing of deposited silt from jack well at Dharna Pumping Station by any means and cleaning of jack well and intake well complete to the entire satisfaction all specifed and directed.
Material and labour for run lead joint including spun yarn and caulking complete all as directed for the size 250 mm dia of spigot and socket pipes.
M & L for Mild steel plates, plain or chequered, 5mm thick Gde-E-250) Quality-A or over in thickness in available sizes for use as duct covers as per existing size including taking out of old one all as specified and as directed.
M&L for replacement of LT unarmoured power Copper cable round/flat of single core 95 Sqmm , 1100 volts with multistanded copper conductors.
M&L for replacement of LT unarmoured power Copper cable round/flat of single core 120 Sqmm , 1100 volts with multistanded copper conductors.
S & F in repair foot valve of size 150 mm dia all as specified and directed Make : Normex
Calibration of electromagetic flow meters at Dharna pumping station with the make of adept reference CWPRS Camp-on Flow meter and submitted the calibration reports to department all as specified and as directed at site .
Supply and fixing ,testing of CVT (Constant Voltage Transformer ) for water meter of Dharana Pumping station Aux Supply :180 VAC to 260 VAC , Output Voltage : 230 VAC/ 50HZ capacity to connect with supply mains water meter complete including nut, bolt, washers and gasket etc all as directed by Engineer-in-Charge
Demolition of Concrete of any description and in any position not otherwise specifically provided for
M&L Providing Cement concrete in roof kerb or mud stops,rounded or chamfered on edges mm graded (12.5 mm) aggregate type B0 1:2:4 in roof kerbs or mud stops, rounded or chamfered on edges
M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 25mmx4 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified.(set of two) NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.
M&L for waterproofing treatment to semi-underground water tanks by thoroughly scraping inside surface, cleaned free from dust, paint,oil,grease,sludge,fungus and moss with help of wire/ Tar brushes and using acid wash if required.Opening all construction joints &corners and injecting cementitious grout by injection pressure grouting process in construction joints & corners to fillup porosity in concrete , using pressure grouting hand pump,plastic nozzles, M/s Choksey SBR + Cement slurry, minimum 30 No of holes per tank to cover all leakage area complete all as specified and directed. Note: Work shall be executed through authorised applicator and as directed by the chemical manufacturer.
M&L for Pressure grouting using M/s Choksey SBR chemical and cement mortar and Choksey CNS 50 Non shrink grout. finaly applying two coats of choksey Techforce 2k strong chemicals (2 Component Acrylic polymer based cementitious coating) and applying two oats of choksey Techoxy-3 water Thinnable Epoxy base1food graded chemicals Complete all as specified and directed.Make:-Choksey chemicals . Note: Work shall be executed through authorised applicator and as directed by the chemical manufacturer.
Taking out Pressure filter media of central filteration plant sizes i.e. gravel/sand from existing pressure filter and depositing at site for reuse and removing unserviceable material from site of work to a distance 50m and not exceeding100m complete all as directed.
Supply & loading of pressure filter media in central filteration Plant in layers complete all as specified and as directed by Engr in charge of following sizes
Pebble size 25 mm to 50 mm
Pebble size 12.5 mm to 25 mm
Pebble size 6 mm to 12.5 mm
Pebble size 3 mm to 6 mm
Sand 0.35 to 0.50 mm
Loading only filter media in filter beds, in layers as directed by Engr in charge of following sizes:- (Note: Serviceable pebbles obtained from item No-56 above after cleaning and screening shall be reused all as directed.
Pebble size 25 mm to 50 mm
Pebble size 12.5 mm to 25 mm
Pebble size 6 mm to 12.5 mm
Pebble size 3 mm to 6 mm
M&L for preparing surfaces of following items by means of wire brush/emery etc and cleaning and painting with two coats of synthetic enamelled paint appropriate colour shades over one coat of red oxide primer all as directed and making directions with arrow all as specified and directed :-
Pressure filters (02 Nos) with all accessories at Central filteration plant such as valves, wheels, pipe in out foundation etc
Pressure filter pumps (02 Nos) with accessories and open pipe etc
sapana enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .