PROVISION OF BLACK TOP ROAD WITH CULVERTS UNDER GE DEOLALI

Amount

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil all as specifide and directed.

Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specifide and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all specified and as directed.

Rolling and consolidating formation surfaces in cutting rolled and consolidated using power roller exc 8 tonnne n'exc 12 tonne all as specifide and directed.

M&L 200mm thick (Spread thickness) soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber

M&L for 150 mm thick Granite trap of Basalt (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient materials and camber required.

M&L for preparing existing WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (Paving VG - 10 grade bitumen) @8.00 Kg per 10 Sqm complete all as specified and directed.

M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving VG - 30 grade bitumen) of min. 4% by weight of total mix all as specified & directed. Note: 4% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 9.1 of Particular specifications and no price adjustment shall be made for plus side variation.

M&L for applying evenly priming/ tack coat with bituminous primer (Paving VG - 10 grade bitumen) @ 2.5 Kg per 10 Sqm complete all as specified and directed.

M&L for premixed bituminous semi-dense asphaltic concrete 30mm consolidated thickeness laid using mechanical paver for any width of road with max 5.0% binder content, paving butimen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed. Note : 5.0% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 9.1 of Particular specifications and no price adjustment shall be made for plus side variation.

Providing precast ce ment concrete 1:2:4 Type B-1 (using 20 mm graded aggregate) in copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, ackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all specified & directed.

M&L 600mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all specified & directed.

M&L Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all specified & directed.

Pre-cast cement concrete block masonry type C-1 (using 20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all specified & directed.

M&L rendering 10mm thick in cement mortar 1:4 on block masonry, finished even and smooth without using extra cement etc all as specified and directed.

M&L preperation of newly plastered surfaces of walls and applying two caots cement base paint over a coat of primer etc all as specified and directed.

M&L for painting line, dashes, arrow, letters etc. on road pavement (parking etc.) providing & applying 2 mm thick road marking strips (reflective) of specified shade /colour using hot thermoplastic material fully / semi-automatic application machine fitted with profile shoe heater driven by experienced operator on road surfaces including preparation of previously treated surfaces , cleaning surfaces of all dirt, scales, oils, grease & foreign materials etc. complete all as specified and directed by Engineer- in- charge.

Galaxy Construction

Aakar Constructions

SANJAY B SHARMA

M/S K.K.BINNAR