REPAIR OF CERTAIN WOODEN AND STEEL FURNITURE AT OTM/MD ACCN OF CMP CENTREUNDER BSO (SOUTH) OF GE (SOUTH) BANGALORE

Amount

BED PLYWOOD TOP Drg No : FD-246 Removing the existing unserviceable/ broken long rail and supply and fix first class hard wood (Teak wood) new long rail size 35x90x1980 mm, including fixing 35 mm x 5mm size flat iron, bent to right angles fixing the long rail, etc complete all as specified and shown on drgs and as directed by Engineer-in-charge.

Removing the existing unserviceable/ broken Head Board with legs and supply and fix new Head Board size 900x400mm with teak wood legs of size 60mmx60mmx400mm all as specified and shown on drgs, including finishing the surfaces with one coat of French polish, etc complete all as directed.

Removing the existing unserviceable/ broken Foot Board with legs and supply and fix new Foot Board size 900x300mm with teak wood legs of size 60mmx60mmx300mm all as specified and shown on drgs, including finishing the surfaces with one coat of French polish, etc complete all as directed.

Removing the existing unserviceable/ broken stiffeners (supporting pieces) and supply and fix first class hard wood (Teak wood) new stiffeners size 40mmx60mm complete all as specified and shown on drgs.

Removing the existing unserviceable Plywood and supply and fix new plywood, size 900mmx1800mm, 12mm thick, commercial BWR grade bearing ISI mark all as specified and shown on drgs.

FD-249 FD-275 TABLE WRITING: Removing the existing unserviceable broken Top and S&F new top made out of 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, with 6mm thick teak wood edging, size 1145mmx600mm all as specified and shown on drg.

Removing the existing unserviceable/ damaged Cupboard shutter and S&F new shutter made out of 18 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, size 400mmx700mm, including piano hinges and brass lock all as specified and shown on drgs.

Removing the existing unserviceable drawer and S&F new drawer size 300mmx600mmx75mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer (Plywood, grade BWR, type BB, , No. of ply 5,), including fittings such as knobs etc all as specified and shown on drgs. Note:- Each drawer will be measured as single unit.

Removing the existing unserviceable back and S&F new back size 1145mmx700mm, made out of 6mm thick Plywood, grade BWR, type BB, , No. of ply 5, with two coats of synthetic enamel paint over a coat of primer all as specified and shown on drgs.

Removing the existing unserviceable side and S&F new side size 600mmx700mm, made out of prelaminated particle board, 18mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, all as specified and shown on drg. Note:- Each side will be measured as single unit.

Removing the existing unserviceable leg and S&F new teak wood leg size 35mmx55mmx717mm, etc complete all as specified and shown on drgs.

TABLE DINING 6 PERSONS. FD-30 FD-239 FD-273 (a) Removing the existing unserviceable damaged top and S&F top with a new prelaminated particle board 18mm with 6 mm thick Teak wood edging all round all as specified and shown on drgs for the following size 1500mmx900mm.

b) Removing the existing unserviceable damaged front and back rails & S & F New Teak wood front and back rails all as specified and shown on drg for the following size 25mmx100mmx1500mm..

c) Removing the existing unserviceable damaged leg and S & F New Teak wood leg all as specified and shown on drg for the following size 75mmx40mmx760mm.

d) Removing the existing unserviceable damaged side rails S & F New Teak wood side rails all as specified and shown on drg for the following size 25mmx100mmx900mm.

TABLE DINING 8 PERSONS. FD-30 FD-239 FD-273 (a) Removing the existing unserviceable damaged top and S&F top with a new prelaminated particle board 18mm 6 mm thick Teak wood edging all round all as specified and shown on drgs for the following size 1800mmx900mm.

b) Removing the existing unserviceable damaged front and back rails & S & F New Teak wood front and back rails all as specified and shown on drg for the following size 15mmx100mmx1800mm.

c) Removing the existing unserviceable damaged leg and S & F New Teak wood leg all as specified and shown on drg for the following size 75mmx40mmx700mm.

d) Removing the existing unserviceable damaged side rails S & F New Teak wood side rails all as specified and shown on drg for the following size 25mmx100mmx900mm.

TABLE PEG FD-277 (a) Removing existing unserviceable top and S&F new top made out of 18mm thick pre-laminated particle board (Novapan) and 4mm thick teak wood edging round the top of table all as specified and shown on drg 450x300 mm

(b) Removing the existing unserviceable bottom rail and S&F new teak wood bottom rail all as specified and shown on drg 20x 40x300mm

(c) Removing the existing unserviceable front/back rail and S&F new teak wood front/back rail all as specified and shown on drg 20x 40x450mm

(d) Removing the existing unserviceable leg and S&F new teak wood leg all as specified and shown on drg 30x50x380 mm

TABLE CENTRE FD-274 Removing existing unserviceable/ damaged shelves for almirah large steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drg.

Removing existing unserviceable/ damaged shelves for almirah medium steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

Removing existing unserviceable/ damaged/ broken legs for almirah large and supply and fix new legs and applying one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

Removing existing unserviceable/ damaged/ broken legs for almirah medium and supply and fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

TABLE 900X600 WITH DRAWER/With out drawer FD-41,224,283 (a) Removing the existing unserviceable table top and S&F new top of prelaminated particle board 18mm(Novapan) interior grade with 4mm thick teak wood edging all round all as specified and shown on drgs

(b) Removing the existing unserviceable/damaged front and back rails and S&F new teak wood front and back rails all as specified and shown on drg

(c) Removing the existing unserviceable damaged leg and S&F new teak wood leg all as specified and shown on drg

(d) Removing the existing unserviceable damaged side rails S&F new teak wood side rails all as specified and shown on drg

TEAPOY FD-278 (a) Removing existing unserviceable top and S&F new top made out of 18mm thick pre-laminated particle board (Novapan) with 4mm thick teak wood edging al-round the top of teapoy all as specified and shown on drg

(b) Removing the existing unserviceable leg and S&F new teak wood leg all as specified and show on drg

(c) Removing the existing unserviceable front rail and S&F new teak wood front rail all as specified and show on drgs

(d) Removing the existing unserviceable side rail and S&F new teak wood side rail all as specified and show on drgs

ALMIRAH LARGE/MEDIUM STEEL.FD-1031,1032 Removing existing unserviceable three way locking device and Supply & Fix three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel.

Removing existing unserviceable three way locking device and Supply & Fix three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah med steel.

Removing existing unserviceable lock and Supply & Fix new lock Make: Godrej/Link/Harrison of appropriate size, 6 levers with duplicate keys chromium plated or equivalent as suitable in almirah complele all as directed by Engr in Charge and shown on drgs for almirah large/medium steel. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately

Removing existing unserviceable handle and Supply & Fix new chromium plated handle 125mm long to almirah large/medium steel all as specified/directed and shown on drg.

Removing existing unserviceable clamps for shelves and spot welding the shelves to almirah sides as directed by the Engr in charge and shown on drgs for almirah large/medium steel.. Note :- Welding each shelf completely will be measured as a single unit.

M & L for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint Make: Asian paints/Nerolac/Berger/Jenson & Nicholson on all external and internal surfaces of almirah large steel (Size 920 x 485 x 1985mm) including fixing new 3mm hard rubber pad in the bottom of legs ect complete all as specified and as directed by Engr-in-Charge.

M & L for Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint Make: Asian paints/Nerolac/Berger/Jenson & Nicholson on all external and internal surfaces of almirah medium steel (Size 760 x 440 x 1270 mm) including fixing new 3mm hard rubber pad in the bottom of legs ect complete all as specified and as directed by Engr-in-Charge.

Removing existing unserviceable/ damaged shelves for almirah large steel and Supply & Fix MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint Make: Asian paints/Nerolac/Berger/Jenson & Nicholson over one coat of red oxide primer including welding to the almirah all as specified and shown on drg.

Removing existing unserviceable/ damaged shelves for almirah medium steel and Supply & Fix MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

Removing existing unserviceable/ damaged/ broken legs for almirah large and Supply & Fix new legs and applying one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

Removing existing unserviceable/ damaged/ broken legs for almirah medium and Supply & Fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirah all as specified and shown on drgs.

TABLE OFFICE CLERK STEEL FD-1004,307 Material & Labour for cleaning / preparing the existing surfaces of table office clerks steel including inner surfaces of drawers steel and applying one coat of synthetic enamel paint Make: Asian paints/Nerolac/Berger/Jenson & Nicholson as approved by Garrison Engineer by spray process to achieve a uniform finish and to fix Hard rubber shoe for legs all as directed.

Removing existing unserviceable drawers of table office clerk steel and Supply & Fix new drawer made of MS sheet CRC 1 mm thick bent to shape to its original position including lock Make: Godrej/Link/Harrison as specified and shown on drgs.

TABLE STEEL 900 X 600 X 760 MM WITH DRAWER FD-1007,1008 (a) Removing existing unserviceable top and Supply & Fix 18 mm thick particle board commercial exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top as directed and shown on drgs.

Removing existing unserviceable drawers of table and Supply & Fix new drawer made of MS sheet CRC 1mm thick bent to shape to its original position and applying one coat of synthetic enamel paint over one coat of red oxide primer all as specified and shown on drgs.

Removing existing unserviceable/ damaged leg/ frame and replacing with new leg/frame of 25mm x 25mm square MS Tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table all as specified and shown on drgs.

Painting to steel frame of table 900x600x760 mm one coat of synthetic enamel paint as approved by Garrison Engineer all as specified and shown on drgs.

LOCKER STEEL FD-1029 Material & Labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish all as directed.

Removing existing unserviceable/ damaged/ broken legs for lockers steel and Supply & Fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick for legs all as specified and shown on drgs

Removing the existing UNSV /damaged hanging rod and S&F new hanging rod 20 mm dia steek cromium plated conduit pipe. Teo sockets shall be provided at the end of hanging rod.

Removing UNSV handle and S&F new chromium plated handle 100 mm long to locker steel fixed to shutters all as specified/directed and shown on drg

Removing UNSV Hasp and staple and S&F new cromium plated hasp & staple 75 mm long to locker steel all as specified and directed and shown on drg.

CHAIR TUBULAR STEEL WITH /WITHOUT ARMS : FD-75 (M) M & L for Painting to steel surfaces of chair tubular steel with Arms with one coat of synthetic enamel paint smoke grey shade Make :Asian paints/Nerolac/Berger/Jenson & Nicholson all as directed and as specified.

M & L for Painting to steel surfaces of chair tubular steel without Arms with one coat of synthetic enamel paint smoke grey shade all as directed and as specified.

Removing existing unserviceable/ damaged seat from chair tubular steel with/without arms and Supply & Fix new seat all as shown on drg and as specified.

Removing existing unserviceable/ damaged back from chair tubular steel with/without arms and Supply & Fix new back all as shown on drgs and as specified.

Removing existing unserviceable/broken Arm rest and Supply & Fix new Arm rest of 1st class hardwood made to shape and painted with two coats of black synthetic enamel paint for chair tubular steel with arms all as specified and shown on drgs.

Removing existing unserviceable rubber shoes from bottom of chair and Supply & Fix new hard rubber shoes to the bottom of chair all as specified and shown on drgs.

Removing existing unserviceable PVC/rubber plug from top of chairs and Supply & Fix new PVC/rubber plug to the top of chair all as specified and shown on drgs.

BOOKSHELF OPEN LARGE STEEL: FD-69 Removing Book shelf open large steel from unit stores and taken to hard stand for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint grey/olive green Make :Asian paints/Nerolac/Berger/Jenson & Nicholson as approved by GE on all external surfaces as specified and as directed by Engr-in-charge

Chair Dining FD :228,279 Removing the existing unserviceable rear leg and S&F new teak wood rear leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front leg and S&F new teak wood front leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable back rest and S&F new teak wood back rest complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail and S&F new teak wood front rail including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable rear rail and S&F new teak wood rear rail including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable side rails and S&F new teak wood side rails including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

CHAIR EASY FD -229 : Removing the existing unserviceable rear leg and S&F new teak wood rear leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front leg and S&F new teak wood front leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable broken Arm rest and S&F new teak wood Arm rest complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front frame and S&F new teak wood front frame including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail and S&F new teak wood front rail complete as shown on drg and all as specified and directed.

Removing the existing unserviceable rear rails and S&F new teak wood rear rails complete as shown on drg and all as specified and directed.

Chair Writing : FD-250,280 Removing the existing unserviceable rear leg and S&F new teak wood rear leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front leg and S&F new teak wood front leg complete as shown on drg and all as specified and directed.

Removing the existing unserviceable back rest and S&F new teak wood back rest complete as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail and S&F new teak wood front rail including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable rear rail and S&F new teak wood rear rail including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable side rails and S&F new teak wood side rails including drilling holes at 12.5 mm C/C complete as shown on drg and all as specified and directed.

Removing the existing unserviceable/ broken Arm rest and S&F new teak wood Arm rest complete as shown on drg and all as specified and directed.

Global Furnisherts

REENA INDUSTRIES