REP/MAINT OF APFC PANEL, PROV OF LIGHTNING PROTECTION, DEFECTIVE FLAME PROOF FTTINGS INCL MAINT OF E/M MACH, PLANTS, EQPT, MS PIPE, FIRE MAIN LINES, PUMP AND DEFVE POINT WIRING AT TS MAHUL, NRS, 31 WEU THANE, SEWRI, VARIOUS AC PLTS UNDER GE(NW) MKD

Amount

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified.

Laying only un-reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches all as specified. Note :- Serviceable cable cover obtained here-in-after shall be reused.

Supply and laying in repairs cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sq mm 3.5 core complete including taking down old us cable complete all as specified and directed. Make - Polycab/ KEI/ Havells

All as per SL Item No 7 herein before but of size 120 Sqmm 3.5 Core complete. Make - Polycab/ KEI/ Havells

All as per SL Item No 7 herein before but of size 70 Sqmm 3.5 Core complete. Make - Polycab/ KEI/ Havells Note : For item Ser No.7,8 & 9 respectively :- (a) Excavation & Earth work shall be measured and paid seperately under appropriate item under this Schedule

Supply and fix in repair Cable jointing kit for 1.1 KV XLPE/ PVC cable for indoor termination End joint complete with jointing material and accessories suitable for 3.5/ 4 core armoured aluminium conductor cable of size 70 sqmm to 120 sqmm complete all as specified and directed. Make - 3M/ M-seal/ Raychem

-ditto- all as per above item no 10 but of size 150 sqmm to 185 sqmm complete all as specified and directed. Make - 3M/ M-seal/ Raychem

Supply and fix in repair Cable jointing kit for 1.1 KV XLPE/ PVC cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5/ 4 core armoured aluminium conductor cable of size 70 sqmm to 120 sqmm complete all as specified and directed. Make - 3M/ M-seal/ Raychem

-ditto- all as per above item no 12 but of size 150 sqmm to 185 sqmm complete all as specified and directed. Make - 3M/ M-seal/ Raychem

M & L in repairs of Three phase 80 KVA UPS 3 phase,including servising/replacement of worn out parts like PCB, IGBT based, Diode, Capacitors,relay,cooling fan,indicators,connectors,lugs,wires,switches,fuses and to attending all brakdown calls and check all electronic component/cards,checking of rectifier/inverter logic boards,adjust battery charging current,cheking of auto transfer facility between inverter and bypass & bypass to UPS, verification/setting/ rectification of LCD mimics alarms,indications, UPS &battery changover test. Location: RUKMANI Bldg Mahul

M & L in repairs of Three phase 60 KVA UPS 3 phase,including servising/replacement of worn out parts like PCB, IGBT based, Diode, Capacitors,relay,cooling fan,indicators,connectors,lugs,wires,switches,fuses and to attending all brakdown calls and check all electronic component/cards,checking of rectifier/inverter logic boards,adjust battery charging current,cheking of auto transfer facility between inverter and bypass & bypass to UPS, verification/setting/ rectification of LCD mimics alarms,indications, UPS &battery changover test. Location: RUKMANI Bldg Mahul

M & L in repairs of Three phase 30 KVA UPS 3 phase,including servising/replacement of worn out parts like PCB, IGBT based, Diode, Capacitors,relay,cooling fan,indicators,connectors,lugs,wires,switches,fuses and to attending all brakdown calls and check all electronic component/cards,checking of rectifier/inverter logic boards,adjust battery charging current,cheking of auto transfer facility between inverter and bypass & bypass to UPS, verification/setting/ rectification of LCD mimics alarms,indications, UPS &battery changover test. Location: RUKMANI Bldg Mahul

Supply and fix in replacement battery heavy duty 12 Volts 180 AH maintenance free complete all as specified and directed. Make : Exide/Amron/Cummins

Supply and fix in replacement battery heavy duty 12 Volts 130 AH maintenance free complete all as specified and directed. Make : Exide/Amron/Cummins

Supply and fix in repairs Power Capacitors of Rating 10 KVAR 415 Volt in repairs Naturally air cooled Double dielectric heavy duty, MPP type 440 Volt 50 HZ Watt Less Power Capacitors wattage not more than 0.5 Watt per KVAR with meter system conforming to IS 13340 and 13341 ISI Marked all as specified.

All as per item No 19 above but Power Capacitors of Rating 5 KVAR 415 Volt complete all as specified and directed.

Supply and fix in repairs power factor controller relay 8 Stage RPM 8, 415 volts, 50 cycles suitable for manual / automatic operation with indication for each stage, power factor adjustment setting knob / screw, display. Make - L&T/ Conzerv / Neptune /SCHNIDER/SYNTRON/

M & L for testing of APFC panel for proper functioning in manual & auto mode, re-wiring the burnt out wires, replacing the wiring ducts/casing Capping, fuse units and cleaning and testing complete all as directed by engineer-in-charge.

Supply & Fix in repair ACB 800 Amps, 4 Pole, 65 KA, with Thermal Magnetic Release (Manual Drawout type), over Load protection, Short Circuit Protection & earth Fault Protection, Metering Display including all necessary alteration required for fixing and testing complete all as specified and as directed. Make - Legrand/ L &T/ C&S/ Schneider/ ABB.

S&F LED strip for outdoor application with drivers Flexishine is a Plug & Play rope light, Length: 5 meters. LED Rope Light: 6W per Meter AC Strip Light for prefect ambience. Super Bright & Powerful. Superior Light Output: Best in class: 400 Lm/Mtr light output. LED Count: 72 LEDs per Mtr for bright and uniform light. Waterproof with IP65 rating, for superior life and withstanding harsh weather. Flexible, Slim & Compact. Applicable for bendable or angled patterns, or in continuous rows. Easy to form into any shape you want, adaptable to various places and locations.

S&F Aluminium Rectangular Surface LED 1Meter Profile Channels with Diffused Cover, End Caps and Mounting Clips Without LED Straight Linear used to install LED strips in addition to protecting the LED strips from damage, the aluminum channel.

M & L in repairs for reinforced cement concrete nominal mix M-20 (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams, plinth beams, bases for column etc and mass concrete, complete all as specified and directed. (Note - Reinforcement and form work will be measured and paid separately).

M & L in repairs for TMT bars of Fe-500 D grade conforming to IS: 1786, 12 mm dia & over, including cutting to length, bent to shape required, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

M & L in repairs for TMT bars of Fe-500 D grade conforming to IS: 1786, 8mm dia bars as in binders, spacers, strippus including cutting to length, bent to shape required, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

M & L in repairs for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams , side and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, for rough finished surfaces of concrete, complete all as specified and directed.

Dismantling only in repairs of old UNSV/rusted steel tubular poles 9 mtr long necessary disconnecting cables/over head condcutor and removing unserviceable pole from site complete all as specified and directed.

Supply, Fixing in reparis / replacement and connection of hot dip galvanised octagonal poles of height 6 mtr with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet along with base plate of size 200 x 200 x 12mm thick including 4 nos of M20 x 600 long J type foundation bolts and 1 mtr long hot dip galvanised single arm standard bracket, including MCB of 6 Amps, with connector 4 way to be provided as termination point complete all as specified and directed. Make: Bajaj

M&L for taking down old unsv and supply & lay 3 Core 1.5 Sq mm size multistranded FRLS copper conductor PVC unsheathed 650 / 1100 Volt Grade As per IS 694 with and including 20 mm dia PVC conduit with necessary saddle, clamps, bolts & nuts, all for interconnection of cable looping box to Street Light Fitting, Post Top Lantern etc all as Directed. Make :- POLYCAB / KEI / HAVELLS/ BENLO

M & L for Taking down and S & F aluminium earth strip as roof/down/earth contunity conductors of size 25x3mm with saddles, Parcelain, insulators, stainless steel screws, washer etc at any position / location of sheds/ buildings of height up to 30 meter complete all as specified and directed by the Engineer-in-charge Note -i) The quoted rate is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter. ii) The rate is deemed to be inclusive of Procealin insulator, screws, Plugs etc.

S&F air termination, single pointed aluminium rod, 12mm dia 300mm long at any position / location including all necessary terminal base plate of thickness not less than 4 mm, scaffolding / staging required, etc. complete all as specified and directed by the Engineer-in-charge

M&L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 nos. 8mm dia 25 mm long hex. Head screw in replacement of the unserviceable. Including MS box made out of 3 mm thick shheet for fixing the block complete all as specified and directed.

M&L for pre-cast cement concreate block of size 0.15M x0.15M x0.15M for fixing of Aluminium strip type C1 1:3:6 using 20mm graded stone aggregate in cement motor 1:4, including fixing the coccrete block on terrace of bldgs of height up to 30 meter all as directed at site Note -i) The quoted rae is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 30 meter.

Supply and fixing of GI pipe light grade of size 40 mm bore for laying in trenches/floors or walls including all fittings for fixing complete as required and directed by Engineer-in-Charge.

M&L for painting on wall with synthetic enameled paint of black colour of 200 x 150 mm size and writing work for earth test result with date & year all as specified and directed at site by Engineer-in-Charge.

M & L for earthing chemical with copper plated 50 mm dia pipe 3 mtr long (100 microns) including Electrodite 50 Kg buried directly in ground including earth bore hole work (earth bore not less than 3 Mtr deep below normal ground level and connected to copper earth strip of size 20×3 mm by means of copper nuts bolts with washers and connected as per following specifications complete all as directed by Engineer-in-Charge. (a) Product Model: ASEEL 19 CP, 3 meter long (Copper Plated) – 100 microns . Fast Electrode, Model FE 80 mm 3 mtr (Pure Copper Single Pipe), Outer Dia is 80 mm with a wall thickness of 2 mm, Inner Dia is 26 mm with a wall thickness of 2.6 mm, Overall Length is 3000 mm, External Corrosion Protection: Copper Plated (100+ microns), Internal Corrosion Protection: In addition to Copper Plated (100+ microns), a ground breaking corrosion resistant Crystalline Conductive Compound is filled and compacted in the cavity within the pipes to enhance the electrodes performance. Conforms to IS: 3043 - 1987 i.e., Code Of Practice For Earthing (+ 10%) variations in dimensions applicable. (b) Electrodite backfill: Fast Electrode Earth Enhancement Compound, Manufactured using Eco - Friendly minerals, Blended homogeneously with conductive carbon(s), Resistivity: < 5 ohm-metre (In ideal moist conditions); > 5 ohm-metre (Dry Conditions), Ph Value: 7.0 - 8.5, High water retention capacity, Hygroscopic, Ionic & Electronic conduction, Swells when it comes in contact with water thereby engaging constant contact between the electrode surface & soil which is a crucial aspect in the performance of an earthing system. Packing Size : 2 Bags of 25 kilograms, Recommended for normal soil conditions. Conforms to IS : 3043 – 1987. (c) Installation of earthing with bore well machine complete for bore exceeding upto 4.5 meter below ground level complete all as specified and directed by Engr-in-Charge.

Supply & Fix copper strip of size 20 X 3 mm duly covered, fixed on porcelain insulators along the wall / roof / ceiling etc complete all as directed. Note : (i) Cost of Porcelain insulators and screw shall be of non-corrosive type and cost is deemed to be included in the quoted rate of the job. (ii) Gap for fixing of support insulator shall not be more than 35cm from one onother.

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core FRLS multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC casing-caping and accessories, fixed on wall / ceiling etc with neccessary fixing accessories and earth continuity FRLS multistranded copper conductor cable size connected to common earth and earth dolly including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws including taking down u/s wiring, fittings, switch, sockets etc all as specified for the following: Note:- All points to be made in Hangers/Sheds, hight up to 10 Meters only. Make of Wire : KEI/ Polycab/ Benlo/ Finolex Make of Conduit: Pressfit/ Sudhakar (a) For one light, fan, call bell, point controlled by one switch.

(b) For one socket point controlled by one switch on same board

(c) For one 5 Amp independent socket point controlled by one switch.

All as per item No 41 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multi stranded 1100 volt grade cable as continuous earth lead.

M&L circuit wiring in repairs with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn in MS Steel conduit with 1.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable wiring complete. Note : 1. M S Conduit/ PVC Conduit will be measured and paid separately. 2. wiring in shed upto height of 6 mtr. 3. Three run of 1,5 Sqmm wire will be measured & paid as one unit. Make of Wire : KEI/ Polycab/ Benlo/ Finolex Make of Conduit: Pressfit/ Sudhakar

M&L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in MS Steel conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : 1. M S Conduitwill be measured and paid separately. 2. wiring in shed upto height of 6 mtr.3. Three run of 2.5 Sqmm wire will be measured & paid as one unit. Make of Wire : KEI/ Polycab/ Benlo/ Finolex Make of Conduit: Pressfit/ Sudhakar

M&L sub main wiring in repairs with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm drawn in MS Steel conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete including rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia in concealed/surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : 1. M S Conduit will be measured and paid separately. 2. wiring in shed upto height of 6 mtr.3. Three run of 4 Sqmm wire will be measured & paid as one unit. Make of Wire : KEI/ Polycab/ Benlo/ Finolex Make of Conduit: Pressfit/ Sudhakar

M & L for Opening switch mounting plate, rectifying the defects in fittings and fixtures by tightening loose connections or taking down of unserviceable/burnt Piano Switches, fan regulators, 5 Amps Sockets, 15 Amps Sockets, 5 Amps Switch socket Commbination, 15 Amps Switch Socket combination, Fan Regulators. Note :- (i) The representative of the contrcator (Supervisor - 1 No, Electrician Skilled - 1 No, Helper - 1 No) shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contract period (ii) Replacement of defective parts/items will be measured and paid as supply and fix under respective items herein below.

M & L for taking down of Light fittings such as 1 X 40 W, 1 X 20, 1x10 Watts tube light fittings, CFL light/LED fittings for repairs & refixing the same after carrying out repairs . Note :- (i) The representative of the contrcator (Supervisor - 1 No, Electrician Skilled - 1 No, Helper - 1 No shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contract period (ii) Tube Rod, CFL lamps, Choke & Starter required to be replaced shall be paid under respective item of this schedule as Supply & fixing. (iii) Minor spares such as holders, connectors, wires are deemed to be inclusive of the quoted rate.

M & L for opening of MCB DB /MCCB DB front door & replacing of burnt wires & tesing comple after carrying out repairs . Note :- (i) The representative of the Contractor (Supervisor - 1 No, Electrician Skilled - 1 No, Helper - 1 No shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contract period (ii) MCCB & MCB required to be replaced shall be paid under respective item of this schedule as Supply & fixing. (iii) Minor spares such as connectors, wires, lugs are deemed to be inclusive of the quoted rate.

M & L in repairs for rewiring of old burnt out copper wiring in LT Panels/LT Feeder, replacing of damaged cable Glands, burnt cable lugs, bus bar link, connectors, damaged insulators, burnt copper cables, door hinges, panel door locks & scrapping of old paints & applying two coats of paint all as directed by Engg-in Charge Make of paints : Nerolac/ Asian Paints/ Berger. Make of primer : Sheenlac/Asian/ Apcolite

Supply & Fix in repairs switch piano single pole flush type 5A, 240 V one way complete. Make - Anchor/ Roma/ Havells

Supply & Fix in repairs Bell push flush type 5 amp, 250 Volts complete. Make - Anchor/ Roma/ Havells

Supply & Fix in repairs switch socket combination 2 in 1 , 5 Amps multipurpose flush type complete Make - Anchor/ Roma/ Havells

Supply & Fix in repairs switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal. Make - Anchor/ Roma/ Havells

Supply & Fix in repairs Ceiling rose surface bakelite three terminal, 240 V complete. Make - Anchor/ Roma/ Havells

S&F, in replacement, electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete conforming/ ISI Marked all as specified. Make - Anchor/ Roma/ Havells

Supply and fix in repairs bell ding dong AC 230 V single pole. Make - Anchor/ Roma/ Havells

S & F in repairs Modular Socket 6 A, 2/3 Pin Combined, inclusive of modular cover plate & box as per combination of points Make - Anchor/ Roma/ Havells

S & F in repairs Modular Socket 6/16 A, 2/3 Pin Combined inclusive of modular cover plate & box as per combination of points Make - Anchor/ Roma/ Havells

S & F in repairs Modular Switch single pole 1 Way 6 Amps inclusive of modular cover plate & box as per combination of points Make - Anchor/ Roma/ Havells

S & F in repairs Modular Switch single pole 1 Way 16 Amps inclusive of modular cover plate & box as per combination of points Make - Anchor/ Roma/ Havells

S&F in repairs ULTRON LED polycarbonate T8 tube 20 Watt with in built driver with metal heat sink, Single/ double sided connection, 230 volts including fixing arrangements and taking down old unserviceable tube rod complete all specified and directed. Make-:Crompton / Havells /Bajaj/Jaquar/Wipro

S&F in Repairs/Replacement Surface and wall mounted batten suitable for LED tube 20-22 watts, 230 volts, including fixing mounting blocks 2 Nos, 1.5 sqmm 3 core PVC insulated copper conductor cable including fixing arrangements and taking down old rusted bracket fittings complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro

Supply and fix in repairs decorative recessed type LED light fitting 35/36 watt (size 2'x2') 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements and taking down old rusted bracket fittings complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

Supply & fix in repairs recess & surface LED 1 ft x 4 ft panel ceiling light fitting 40 Watt (SPAN) with high brightness SMD LED as light source and including driver unit, including provision of 3 core copper flexible cable size 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro

Supply & fix in repairs LED Highbay light fittings 150 watts, Energy saving, environment friendly & robust open type vertical Highbay LED IP 66 luminaire including driver and required GI tube down road of length up to 2 meter with hoooks for hanging the fitting. The fitting including fixing arrangements and taking down old rusted bracket fittings complete all specified and directed. Make-:Crompton /Bajaj/Jaquar/Wipro Note : Fittings shall will be installed in Hangers/Sheds, height up to 10 Meters only and directed by Engr-in-Charge.

Supply Installation, Testing and Commissioning of LED Highbay luminaire 118 Watts with S nominal system lumen outpot Of 14300 lumens and a minimum system efficacy of 120 im/. The luminaire shall have a rated syatem lifetime of 50,000 buring hours at -70 The luminaire Should have a color temperature of 6500K and CRI >80 iuminaire shall meet IP65 rating with THD with THD <20% and PF> 0.95 al iK07. The luminaire housing should made of High Pressure cie cast Aluminium with tempered glass and offering narrow beam optics with 2*50degree Rotationai symmetry beam (for high ceiling heights). The total power. consumption should not exceed 118W (including driver) Similar-to Philips Make MAXOLID "BY415P LED145S CW WB FG PSU GR or equivalent in Wiprol Jaquar" Fabricate,supply & fix GI pipe bracket 25mm dia- 0.9m long &2 set of clamps made out of 30.

Supply & Fix in repairs MCCB DB TPN 4 Way double door prewired suitable for Triple Pole 125 A incomer MCCB with the following acessories including taking down u/s DB - a) MCCB TP 125 A 25 KA 415 Volt - 1 Nos b) Bus bar, Din rail , Neutral link Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 2 way 240 volts Single door, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 4 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 8 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 12 way 240 volts Double door 200 Amps rated bus bar, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs TPN DB 4 way 415 volts Double door, including connecting up with existing cable with new lugs including taking down old u/s. The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

S&F in repairs single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts including taking down old u/s complete all as specified and directed. Make - Indoasain/Legrand/Havells

M&L in repairs for MCB SP, 240 volt, 5 to 32 Amps, 10 KA, C Curve, including taking down old u/s complete all as specified and directed. Make - Indo Asian/Legrand/ ABB/Schnider/Havells

M&L in repairs for MCB SPN, 240 volt, 40 to 63 Amps, 10 KA, C Curve, including taking down old u/s complete all as specified and directed. Make - Indo Asian/Legrand/ABB/Schnider/Havells

M&L in repairs for MCB TPN, 240 volt, 40 to 100 Amps, 10 KA, C Curve, including taking down old u/s complete all as specified and directed. Make - Indo Asian/Legrand/ABB/Schnider/Havells

Taking down old unserviceable High bay, Mid Bay, Flame Proof light fittings from walls/Builings/Sheds/Ceiling height up to 10 Meter for repairs and replacement of burnt/worn out accessories and refixing the same in existing position including testing of fittings after repair, testing of connected wiring complete all as directed by Engineer in charge . Note :- (a) T & P, Ladder for any height etc are deemed to be included in the quoted rate. (iii) The representative of the contrcator shall report to Engineer-in-charge/JE and carry out repairs on daily basis during the contrcat period and the defect shall be rectified on the same day (iii) A penal recovery of Rs 500 Per Day Per Complaint for not attening the compalint will be recovered

Supply and fixing Post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection die cast aluminium spigot with spun aluminium top duly powder with PC diffuser & PMMA clear diffuser from outside with impact and corrosion resistant complete with driver and lamp including removing old unsv lights complete. Make:- Bajaj/ Havells / Benlo/ Crompton/ Jaguar/ Wipro

Supply and fixing Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection die cast aluminium spigot with spun aluminium top duly powder with PC diffuser & PMMA clear diffuser from outside with impact and corrosion resistant complete with driver and lamp including taking down old u/s light fitting complete. Make:- Havell's/ Crompton/ Jaguar/ wipro/ Bajaj/ Benlo

S&Fix in replacement Flameproof wall mounted outdoor type double door LT Panel made out of 3 mm thick CRCA Sheet, the panel shall be provided with flame proof MCB DB made out of Cast aluminium alloy LM6, inside and out side light gray epoxy powder coating shade, with 1 No cable entry for incoming cable and three Nos cable entry for out going circuits with and including cable gland and stopping plug, 1 No MCB SPN 32 Amp as incoming and 3 Nos MCB SP6 Amps for out going connections IP 65 protection as per IS 2147/1962. The panel shall be powder coated, front openable and locakable with key and shall be fabricated from CPRI approved sample manufacturer including taking down old u/s Panel complete all as specified and directed. Make- Sudhir /Flexpro /Baliga /crompton greeves/ Shyam Switch Gear Note - The contractor shall submit the Layout Drawing of Panel and got approved by GE before the panel fabrication

Supply & fix in repairs UPVC panel trunking of size 300 mm X 100mm including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed Make - Precision Cat No PPT 100100 or Equivalent from Presto Plast/Finolex

Supply and Fix in repairs CIMFR certified LED flame proof well glass light fitting 60 watts , with driver & LED, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of 1.5 Sqmm, with flexible metal conduit, including including fabricating red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut, bolts, hooks, chain etc including taking down old u/s fitting. The Fitting Shall Conform to Make : Crompton/ Shyam Switch Gear /Bajaj / Sudhir Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10 - 60Amp suitable for single phase, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as directed by Engr-in - Charge .Make - L&T / HPL / ABB/ Benlo

Supply and Laying in repairs or fixing or passing through pipe, XLPE insulated ISI marked, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3.5 core including necessary connection and providing cable lugs as required including disconnection/taking down of existing cable all as specified. Make: Polycab/ Havell's/ KEI/ Gloster

M&L for earthing complete with GI earth plate electrode 600x 600x 3 mm buried directly in ground with top edge of the plate not less than 1.5 mtrs below normal gound level and connected to earth test point by means of GI Strip of size 32x6 mm all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 including earthwork, PCC chamber, CI cover, protection and watering pipe, funnel, mesh etc all as required at site and all as directed. Note: (1). 7.5 RM GI strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately (2) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of GI earth plate.

Dismantling and taking out old architrave from landing door of lift complete all as specified and directed by Engineer - in - charge.

Material & labour for 16-18mm thick mirror polished black granite slab, machine cut mirror polished cladding with chamfered/rounded edges approved decorative design including necessery PCC work granite slab & jointing in cement slurry and pointed in white cement mixed with pigement to match with shade of granite for lifts architrave at all floors complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted surfaces of pre-stressed concrete pole upto 11/9 mtr long by scarping old paint and applying two coats of cement base paint including numbering of pole with black oil paint painting the base of the pole in alternate black and yellow stripes each 30 Cm apart up to 1.5mtr height including marking of MES No with black paint on the pole all as directed by Engineer in Charge.

M&L for preparation of old painted surfaces of Steel Tubular pole upto 9 mtr long by scarping old paint and applying two coats of Aluminium paint including numbering of pole with black oil paint and painting the base of the pole in alternate black and yellow stripes each 30 Cm apart up to 1.5mtr height including marking of MES No with black paint on the pole all as directed by Engineer in Charge.

M & L spray painting inside, outside complete to the LT panel boards outdoor type of size not exceeding 2.0 Mtr width 2.5 mtr in height and 0.75 mtr in depth with single coat of synthetic enameled paint of superior quality and approved colour after preparation of steel surface complete all as specified and directed.

M&L for scraping all foreign materials with emery paper, cleaning the body, frame of Motors, Pump Set, Sluice valve, Control Panels and painting with one coat of supper enameled (spray paint) grey paint and writing of letters with synthetic enameled black paint complete all as specified and directed.

Material and labour for loose filling with graded coarse stone aggregate 40 mm for out type sub Stations not exceeding 15 Cm thick complete all as specified and directed.

M&L for spreading stone aggregates /hardcore of guage not exc. 63 mm, deposited,spread and levelled in layers n exc. 15 cm thick over sand layer including proper levelling as directed by Engr-in-charge. Note : Max thickness shall be 75 mm

Taking down old u/s cable and supply laying connecting and testing of flexible cable 4 runs single core 16 sqmm copper conductor laid in trenches in incl;uding clamps of suitable size to fix the cable on wall of trenches and from main panel control panel to chiller unit 30 TR capacity.

Taking down old corroded pipe and replacement of unserviceable MS pipe, heavy grade of following sizes (condenser water tubing from the cooling tower area) including provision of all fittings, welding and connected works as required for smooth functioning of AC Plants, complete all as specified and directed, Make : TATA/JINDAL :- (a) 150mm bore

(b) 100mm bore

Taking down old u/s cable and Supply laying fixing connecting & testing PVC insulated 1100 volts grade PVC sheathed conductor cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded Copper conductor of size16 core 1.5 sqmm calble 1100 Volts grade for indication control of AHU ( Note: Necessary Earth work required for laying cable, sand Cusioning, protection cover/ GI pipe light grade are measured and paid saperately)

M & L in repairs for cutting and taking out existing U/S leakaged cooling coil from AHU and replacement of cooling coil 4-6 Rows deep of capacity 30 TR suitable for Air handling unit of capacity 12000-13000Cfm, sectionalised construction capacity 30 TR as per existing size of copper cooling coil including fixing connecting and testing all as dircted.

M& L Supply, fabricating and fixing structural mild steel RS joist, channel, angle iron, flat iron and brackets etc for fabrications for cross arms supporting, clamps and back plates, including nuts, bolts and washers, welding to shapes for fabrication of structure to support cooling tower / fondation base to pumps/ compressor/chiller including required nuts, bolts and washers including necessary cutting/ jointing/welding with and including two coats black bituminous paint over a coat of red oxide primer all as required at site

Taking down defective corroded GI duct and Supply, assembly and erection of GI sheet with C & SS rectangular/ square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as corner, cleat carriage bolt, Gasket and appropriate sealant on longitudinal joints etc of size 24 Gauge complete all as specified.

Taking down old wornout AC duct and Supply and replacement in repairs ducting for supply/Return made out of GI steel metal 22 gauge, Zinc coated complete with all standard accessories, flanges, G I Hardware, Self Adhesive elastomeric foam gasket, support etc as per IS-655, complete all as specified and directed.

Supply & Fixing in repairs of 26G Aluminium cladding for ducting for supply/ return duct for mechnical protection incl taking down old u/s cladding complete all as specified and directed.

M & L in repairs for duct insulation (50mm thick) with resin bonded fibre glass wool roll of density 24 Kg/Cum, with factory laminated aluminium vapour barrier, as specified and comprising of following works all as specified : (a) M&L for cleaning the duct surface (to be insulated) by scrapping carefully with wire brush etc to make the surface completely free of miss-scale, dirt, dust, grease and other foreign materials, taking special care so that all duct joints are sealed against any leakage. (b) M&L applying rubber based adhesive CPRX compound. (c) M&L for sealing of all longitudinal joints and circular overlaps with and including aluminium foil tape 50mm wide, to make the insulation leakproof. (d) M&L for securing the insulation with and inculding mechanically fastened nylon / steel straps of size 50mm wide at maximum intervals of 1.2 metre.

Supply & fix in repairs 250mm dia volume control damper shall be terminated in duct collar incl taking down old u/s one complete all specified and directed.. Make : DYNA/RAVISTAR/MAPRO/CARY AIR/ATE

Supply & fix in repairs 300mm dia volume control damper shall be terminated in duct collar incl taking down old u/s one complete all specified and directed.. Make : DYNA/RAVISTAR/MAPRO/CARY AIR/ATE

M&L for painting of Central AC plant complete with approved AC colour coading of complete installation including chiller lines, AHU water lines and cable marking, Route indicators complete & preparation of existing surface by rubbing and writing the symbols and identification etc all as specified and directed by Engr-in-Charge. Make of Paint : Apcolite (Asian)/ Burger/ Nerolac

Supply & fixing in replacement of Three Way Control Valve in a single body equipped with electronic modulating actuator working on 0-10 V DC, 4- 20 mA electric signal. The minimum close of Pressure of actuator must be 1.5 times shut off head of pump as per specifications suitable for pipes of size 80 mm dia bore, complete all as specified and as directed by Engineer-in-Charge. NOTE:(i) The valve shall be complete with digital type modulating thermostat (with NTC sensors) & have provision of setting room temperature. (ii) The valve system shall be complete with necessary control wiring between control transformer, valve and standalone thermost .

-Ditto- all as per item No 110 but for 50 mm dia bore, , complete all as specified and as directed by Engineer-in-Charge. Note : A sum of Rs 1,10,033.00 towards sch of credit shall be deducated to arrive the contract sum.

sapana enterprises

M/s Mukesh Engineers

Shree Ayyappa Engineering

Joy builders