REPAIR/REPLACEMENT OF JOINERY AND OTHER CONNECTED WKS AT VRG LINE, ME LINE, COD ESTATE, SUPPLY DEPOT, HARDING ROAD, NAPIER ROAD, UNDER AGE B/R-I OF GE (I) KANPUR CANTT

Taking down chowkats without taking off shutter from chowkats area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each and re-fixing in the same opening complete all as specified and directed.

M&L 2nd class HW as in plain , solid, straight chowkhats and frames , wrought , framed , rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified and directed.

S&F hold fast of flat iron 25 x 3 mm complete all as specified and directed.

S&F 100 x 50mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and directed. Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item.

S&F 125 x 63mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and directed. Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item.

S&F 30 mm thick factory made WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

S&F factory made wire gauged solid PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be wire gauzed in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmely. Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item.