Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC HNO 52B LAXMI PLACE PHASE II DEORI ROAD NEAR MOHANDEV SCHOOL UKHARA ROAD AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹34.8 L+₹75,291 (2.21%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹34.8 L+₹83,896 (2.47%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹35.6 L+₹1.6 L (4.73%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹35.6 L+₹1.6 L (4.77%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
1 Aug 2023, 6:00 pmClosed
GE (East) Agra
Garrison Engineer (East) Agra, Military Engineer Services, Gwalior House, 62 Taj Road Agra Cantt-282001
REPAIR /MAINT OF DRAIN, FOOTPATH, PARKING SHEDS AND FENCING ETC AT MANEKSHAW ENCLAVE, FMC, METCALF, SOM, ODF, SHERON LINES, BP LINES AND CERTAIN PLACES OF AGE B/R -I UNDER GE (EAST) AGRA
2023_MES_608683_1
9573/E8
Open Tender
Civil Works
Works
270 days
AGRA (UP)
Please refer tender documents
10 documents required · 10 mandatory
₹500
GE (East) Agra
₹70,000
Yes
25 Sept 2023
11 Jul 2023
8 Aug 2023
11 Jul 2023
1 Aug 2023
25 Jul 2023
Amount
Excavation in post holes (or similar holes) in soft/loose soil each not exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, inlayers n.exc. 25cm in soft/loose soil and getting out complete all as specified.
M&L PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.
Dismantling of barbed wire fencing of any dia complete all as specified & directed
Dismantling of posts or struts (wood ,steel or RCC) any section embedded in concrete/brick work/masonry etc ,including taking out embedded portion and making good disturbed ground
Dismantling MS work of any description not otherwise provided for complete all as specified & directed
Demolition of cement concrete (unreinforced) in any position and any description including removing the same at location as directed complete all as specified.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillers etc complete all as specified & directed.
Material & labour for brick work in CM 1:6 with old size sub class 'B' brick & straight or curved on plain exeeding 6m mean radius complete all as specified & directed.
All as per item No 8 above except bricks (Note :- Old bricks obtained from item No 7.00 above shall be reused after cleaning ) complete all as specified and directed.
M&L for 15mm thick plastering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash at any height (n.Exc 8 m )incl necessary scaffolding /Centreing etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer at any height (n.Exc 8 m )incl necessary scaffolding /Centreing etc complete all as specified and directed.
Taking down of plaster from wall/ ceiling and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.
M&L for Cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in Coping, bands, bed plates, etc including necessary form work complete all as specified & directed
M& L for providing cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate ) in surface channels and drains complete all as specified and directed.
M&L for Cement concrete in foundation, filling and mass concrete Type D2 1:4:8 (40mm graded stone aggregate) complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto
M&L for framed work of angle iron as in fencing posts including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc ) including all necessary welding, drilling holes, etc all as specified & directed
M&L for preparation of new steel or iron sufaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of any colour complete all as specified and directed
M&L for broken glass coping on top of wall including 20 mm thick CM 1:3 after taking out and removing rubbish complete all as specified & directed
S & F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design, including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-0 complete all as specified & directed.
Supply only chain link MS galvanised fencing any size and type complete all as specified and directed(Note- weight shall be measured by BOO as ordered by GE).
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and directed.
S & F Mild steel screw bolts(machine made) with haxagonal or squareheads and one end and screwed otherend or screwed both ends, each screws shall be fixed with necessary washers exc. 5 cm but n. exc. 10 cm long and 16 to 20 mm diameter of neck complete all as specified and directed.
Supply only MS in flat ,round or square bars in available length confirming to Fe-410-W(Gde-E-250) complete all as specified & directed,
S & F mild steel framed work as in framed work such as grills,gratings etc with ends of bars shouldered /riveted or forged into spikes ,framed guard bars ,barred iron doors ,railing etc framed and hung as gates , including pintle hinges ,stops ,hand made sliding bolts etc complete all as specified & directed,
M & L granite machine cut 20 mm thick black coloured bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match including cutting , polishing & rounding edges as on columns or pillars /columns over and including 15mm thick rendering in cement mortar 1: 4 complete all as specified & directed
M&L for 50 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor including finishing concrete surface even and smooth without using extra cement complete all as specified.
M&L for Rubber Moulded Chequered Cement concrete tiles 20cm x 20cm x25mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, with grey cement and Coloured pigments incl 15 mm thick screed bed with CM 1:6 complete all as specified and directed.
M & L for sand Cushion for filling in floors or pavings,laid in layers n exc 25 mm (compected) thick,spread,levelled and rammed including watering complete all as Specified and Directed by Engr - In Charge.
M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade Complete all as Specified and Directed by Engr - In - Charge.
M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /flooring & hard standing finish even & smooth without using extra cement all as specified and directed.
Demolition of reinforced cement concrete (unreinforced) in any position and any description including removing the same at location directed by Engr-in-charge complete all as specified and directed.
M & L for providing precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab (for manholes and drains) including necessary form work set in CM 1:4 complete all as specified and directed. (Note:- Reinforcement shall be measured and paid separately)
M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L for Mild steel TMT bars 6mm to 8 mm dia and cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S & F galvnised two strand steel barbed wire 2.24 mm dia of barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straighting bolts including securing or typing at crossing with and provn of galvnised MS wire staple or steel pins etc complete all as specified & directed,
Restraining and resecuring exiting barbad wire fencing including making good staples etc complete all as specified & directed,
M&L for providing Cast in situ concrete kerb stone as in edging or similar in PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) edges finished even and smooth cross section area not less than embedding kerb stone and removing surplus earth out side premises including necessary form work for casting complete all as specified and directed.
M&L for two coats of Indigo paint on new surface of concrete, brick / stone / wall over one coat of primer including preparation of surfaces complete all as specified and directed.
M/S OMKAR SINGH YADAV
VISHESH BUILDERS
R.S BUILDERS
Balaji Associates
AMAR NATH SHARMA
KARVI ASSOCIATES
Attar Singh and Sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .