REPAIR TO JOINERY, INTERNAL WATER SUPPLY AND CONNECTED WORK AT SUB AREA AND ADJOINING AREA AGE B/R-I OF GE (NORTH) UDHAMPUR

Amount

Taking down chowkats or frames, area exc 1.50 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frames), complete all as specified and directed.

All as per serial item No. 1.00 here-in-above but area not exc 1.5 Sqm each.

Taking down shutters of any description, area not exc 1.0 Sqm each, complete all as specified and directed.

Taking down shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

Taking down shutters of any description, area exc 2.0 Sqm each, complete all as specified and directed.

Re-fixing in same opening, shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

Re-fixing in same opening, shutters of any description, area exc 2.0 Sqm each, complete all as specified and directed.

S&F pressed steel frame of size 125mm x 60mm (section size) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc. and back recess to be filled with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates), complete all as specified and directed.

S&F pressed steel frame of size 105mm x 60mm (section size) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc. and back recess to be filled with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates), complete all as specified and directed.

Cutting holes in brick walls (exc half brick but not exc one brick thick wall), built in cement mortar and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.

S&F 30mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. Note :- Sample of doors shutter shall be as per door shutter fixed in Bldg No. NP-23 of HQ 71 Sub Area.

S&F 35mm thich glazed and skeleton shutters, 2nd class hardwood, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I (2009), Section 8, Clause 8.24 (a), supplied and fitted to chowkat at site, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, wall nut colour, 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick moulded prelam PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS. Square tube, in opening as per specification and drawings, complete all as specified and directed.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 Nos bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed.

S&F in replacement of MS helical door spring, 300mm size including roller and roller plate, fixed to wooden or steel frames with welding/ fitted with screws etc, complete all as specified and directed.

S&F aluminium powder coated (match with door shutters) hydraullic door closer, suitable for aluminium glass door shutters of 851 to1000mm in width and of weight between 61 to 80 KG, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section of size 150mm, complete all as specified and directed.

S&F 150mm long alunminium handle, fabricated type, anodised, complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm, fixed with tinned tacks or galvanised with wire staples, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Dismantling of boarding of any description, fixed in any position with nails, complete all as specified and directed.

S&F 18/19mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in cupboard, kitchen cabinet or similar work etc. including provn of 6mm thick teak wood lipping alround the board/ shutter, complete all as specified and directed.

S&F 30mm (when opened) continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

S&F aluminium handles, cast type, anodised, 100mm long, complete all as specified and directed.

S&F 100mm size hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F magnet catchers, 50mm steel plate, MS body and striking plate including letting in, complete all as specified and directed.

S&F in replacement of stainless steel multipurpose basket in wooden drawers/ partitions for storing rations of various types, made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc. suitable for modular kitchen, complete all as specified and directed.

S&F in replacement of stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges), fixed to shutters in cupboards of standard size and shape, suitable for modular kitchen, complete all as specified and directed.

S&F in replacement of telescopic drawer side channel of std size and including roller for moving drawer, mild steel bright finish or electrogalvanised, suitable for modular kitchen, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal / aluminium frames including punching or drilling out old glazing pins/ spring clips, complete all as specified and directed.

S&F in repair 5mm thick tinted sheet glass, ordinary quality and glazing with oil putty / aluminium rubber beading in squares exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

Dismantling water tank and remove to store of capacity exc 250 ltrs but not exc 500 Ltrs with all necessary fittings, complete all as specified and directed.

Dismantling water tank and remove to store of capacity exc 500 ltrs but not exc 1000 Ltrs with all necessary fittings, complete all as specified and directed.

Dismantling water tank and remove to store of capacity exc 1000 ltrs but not exc 2000 Ltrs with all necessary fittings, complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), tripple layered, white in colour (inside & outside), hoisted and fixed in position including inlet, outlet and overflow connection nipple of suitable size, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), tripple layered, white in colour (inside & outside), hoisted and fixed in position including inlet, outlet and overflow connection nipple of suitable size, complete all as specified and directed.

S&F 2000 ltrs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), tripple layer, white in colour including water tank cover (internaly interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes, complete all as specified and directed.

Disconnection of existing tank, setting side for repairing, cleaning etc. and hoisting after cleaning and removing all scale and dirt etc. from tank and from mouth of circulating pipe etc. of capacity exc 500 ltrs but not exc 1000 ltrs and including endorsed the ward 'CLEANED ON WITH DATE' with white synthetic enamel paint including replacement of broken/ unserviceable fitting such as elbow, Tea ,socket, nipple of any size etc, complete all as specified and directed.

Disconnection of existing tank, setting side for repairing, cleaning etc. and hoisting after cleaning and removing all scale and dirt etc. from tank and from mouth of circulating pipe etc. of capacity not exc 500 ltrs and including endorsed the ward 'CLEANED ON WITH DATE' with white synthetic enamel paint including replacement of broken/ unserviceable fitting such as elbow, Tea ,socket, nipple of any size etc, complete all as specified and directed.

Disconnection of existing tank, setting side for repairing, cleaning etc. and hoisting after cleaning and removing all scale and dirt etc. from tank and from mouth of circulating pipe etc. of capacity exc 1000 ltrs but not exc 2000 ltrs and including endorsed the ward 'CLEANED ON WITH DATE' with white synthetic enamel paint including replacement of broken/ unserviceable fitting such as elbow, Tea ,socket, nipple of any size etc, complete all as specified and directed.

S&F ball valve, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for 20mm bore iron pipe and fixed in position, complete all as specified and directed.

S&F ball brass valve 25mm dia, high pressure with polythene float and fly nut, complete all as specified and directed.

S&F in replacement of 25mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in replacement of 20mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in replacement of 40mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F stop valve, brass, fancy type with flange, chromium plated with long shank and cup (concealed type), screwed down high pressure with capstan head handle, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

S&F stop valve with long shank & cup (concealed type) of PTMT of any colour, screwed for 15mm bore iron pipe (min. weight 110 Gms), complete all as specified and directed.

S&F in replacement stop valve with long shank & cup (concealed type) of PTMT of any colour, screwed for 15mm bore iron pipe (min. weight 110 Gms), complete all as specified and directed.

S&F in replacement of angle valve, brass, chromium plated, fancy type with capstan head handle, screwed down, high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed.

S&F in replacement of angle/ stop valve of PTMT of any colour, screwed 15mm bore for iron pipe (min. weight 90 gms), complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 40mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

All as per serial item No. 59.00 here-in-above but except pipes.

S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

All as per serial item No. 61.00 here-in-above but except pipes.

S&F 40mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

All as per serial item No. 63.00 here-in-above but except pipes.

M&L for cutting chases in stone concrete block or slab, walls, pinning in and making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing steps, cills, sunshed, shelves, lintels etc. and cutting chease for water tubing or concealed conduit wiring etc. cutting not exc 10cm in girth, complete all as specified and directed.

S&F PVC nahani trap with grating to 75mm bore including jointing to waste pipe, fixed in cement, complete all as specified and directed.

S&F in replacement of stainless steel soap dish, approximate size 160x160x90mm, complete all as specified and directed.

S&F in replacement PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve, float and handle, complete all as specified and directed.

S&F in replacement of vitreous china wash down water closet (pedestal pattern), white in colour including connection to drain pipe and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed.

S&F plastic water closet seat cover, closet pattern with flat bottom and cover and including mild steel chromium plated or aluminum hinges device, complete all as specified and directed.

S&F in replacement of vitreous china squatting pan, ‘Orissa’ pattern, size 580mm x 440mm, white with integral foot rests complete including trap, set in and provision of lime concrete filling in sunken portion, complete all as specified and directed.

S&F in replacement of water closet vitreous china, semi pedestal pattern (Anglo-Indian Type) white complete including connection to drain pipe and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed.

S&F in replacement of vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe), complete all as specified and directed.

S&F in replacement of vitreous china wash basin, white, flat back, size 580x450mm excluding taps, waste chain & plug & porcelain stopper but including brackets, complete all as specified and directed.

S&F flush pipe with rubber washer of PVC, 32mm dia, for low level cistern, complete all as specified and directed.

S&F 40mm dia PVC waste pipe for WHB/Sink, complete all as specified and directed.

S&F in replacement of 32mm bore CP brass waste coupling, suitable for WHB, complete all as specified and directed.

S&F sink with drainage board, made of stainless steel 1mm thick, kitchen or laboratory type with plugs, washers & waste including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F sink, made of stainless steel 1mm thick, kitchen or laboratory type with plugs, washers & waste including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F push tap of any colour of PTMT, screwed for 15mm bore iron pipe, suitable for urinals (min. weight 50 gms), complete all as specified and directed.

S&F in replacement of bib tap standard of PTMT of any colour, screwed for 15mm iron pipe & fixed (min. weight 90 gms), complete all as specified and directed.

S&F in replacement of bib tap fancy type standard of PTMT of any colour, screwed for 15mm bore iron pipe & fixed (min. weight 105 gms), complete all as specified and directed.

S&F in replacement of bip tap with long body standard of PTMT of any colour, screwed for 15mm bore iron pipe & fixed (min. weight 120 gms), complete all as specified and directed.

S&F in replacement of pillar tap of PTMT of any colour, screwed for 15mm bore iron pipe & fixed. (min. weight 110 gms), complete all as specified and directed.

S&F in replacement of pillar tap of PTMT of any colour, fancy type, screwed for 15mm bore iron pipe & fixed. (min. weight 120 gms), complete all as specified and directed.

S&F towel rail, 450mm long of PTMT, fixed with & including CP brass screws & wooden/ plastic cleats (min. weight 170 gms), complete all as specified and directed.

S&F in replacement of bib tap, brass, chromium plated, fancy type, long nose with capstan head handle, screwed down, high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed.

S&F in replacement of push cock, brass, chromium plated, fancy type, long nose with capstan head handle, screwed down high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed.

S&F in replacement of health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed.

S&F in replacement of jet spray, brass, chromium plated, heavy duty including flexible pipe, suitable for 15mm bore water connection, suitable for EWC, complete all as specified and directed.

S&F CP gratings, size 75/100mm dia, complete all as specified and directed.

S&F in replacement PVC connection of 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement PVC connection of 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in replacement of brass CP shower rose of 125mm size, shower arm 15mm dia, 195mm long with bend of 45 degreee with wall flange, complete all as specified and directed.

Dismantling of PVC rain water pipe of any size and description, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) bend, suitable for 75mm bore pipe, any radius with oval acces door, complete all as specified and directed.

S&F PVC (SWR) bend, suitable for 110mm bore pipe, any radius with oval acces door, complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T / Y jn with access door), equal or unequal, suitable for 75mm bore pipe, complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T / Y jn with access door), equal or unequal, suitable for 110mm bore pipe, complete all as specified and directed.

S&F in replacement of MS powder coated curtain rods with bracket, fixed to wall with suitable SS screws and onion type end brackets all as approved design/ colour/ pattern including knobs, complete all as specified and directed.

S&F mortice lock with two lever, MS body (vertical type), 100mm length of latch with 3 set of keys, fixed in door shutter with proper in position, complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.

All as per serial item No. 105.00 here-in-above but except bricks.

M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis, complete all as specified and directed.

M&L for 15mm thick rendering into two layers consisting 10mm thick in CM 1:4 followed by 5mm thick in CM 1:4 with using WPC on fair faces of brick work or concrete surface including finishing the surface even and fair without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

M&L for 10mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing the surface even and smooth without extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer paint, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying oil bound distember over a coat of primer over and including two coats of approved wall care putty, complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated etc.) sheets as in roof coverings, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with galvanised 8mm dia 'J' hooks or self tapping screws, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ valley gutter/ barge board, fixed with galvanised 8mm dia 'J' hooks or self tapping screws, complete all as specified and directed.

Dismantling of ceiling boards, fibre, pulp, insulation etc. or insulation boards/ slabs/ blankets, any thickness including cover and grid, complete all as specified and directed.

S&F false ceiling with cement designer tile white painted (high pressure steam cured) of 4mm thickness (as per IS:14862) of panel size 595mm x 595mm and any one of the design (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and 15x32mm made of 0.30mm sheet and cross 'T' at 600mm c/c to form a grid including required cutting/ making, opening for services like diffusers, grills, light fittings, fixures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin etc. with gavanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T' sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 Kg/Sqm and refixed all exesting electric wiring and fixtures, complete at all heights as per direction of Engineer-in -Charge.

S&F false ceiling boards of fibre fement designer tile, white painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 1220mm x 1220mm / 1195mm x 595mm / 1220mm x 610mm or any other suitable size as per existing grid frame work and any one of the design (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on existing interlocking metal grid including required cutting/ making opening for services like fixed over existing grid inluding necessary scaffolding etc. and refixed all exesting electric wiring and fixture, complete at all heights as per direction of Engr-in-charge.

All as per serial item No. 118.00 here-in-above but except ceiling board including removing and refixing of existing boards.

S&F grid frame suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and 15x32mm made of 0.30mm sheet and cross 'T' at 600mm c/c to form a grid including required cutting/ making, opening for services like diffusers, grills, light fittings, fixures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin etc. with gavanised butterfly level clips, spaced at 605mm x 605mm c/c along main 'T' bottom exposed width of 15mm of all 'T' sections shall be centra black prepainted with polyester paint and having a load bearing capacity of 12 Kg/Sqm and refixed all exesting electric wiring and fixtures, complete at all heights as per direction of Engineer-in-Charge.

Demolition of un-reinforced cement concrete in ground floors and pavings, not exceeding 15cm thickness including floor finish, complete all as specified and directed.

M&L for 50mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection / leveling course, finishing the surfaces of concrete/ topping even and fair without using extra cement, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base to receive floor finishes, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick (square / rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm each, as in floors etc, set and jointed with spacer and laid with epoxy grout in neat cement slurry and pointed to match the shade of tiles, fixed over and including 15mm thick screed bed 1:4, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of each size 450x350x7mm as on vertical surfaces of walls, dados, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4, complete all as specified and directed.

M&L for 10mm thick coloured vitrifired tiles (double charged) (square/ rectangular), polished, light shade, area of each tiles exc 0.38 Sqm but not exc 0.64 Sqm (min. size 1200mm x 600mm) as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

All as per srl item No. 128.00 here-in-above but as in skirting, fixer over and including 10mm thick rendering in cement mortar 1:3.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor, base of tiles etc, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 600x300mmx7mm thick or above nearest sizes, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick plaster in CM 1:3, complete all as specified and directed.

Demolition of stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness as in floors, aprons etc, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade, laid over and inclusive 30mm thick sand cushioning and joints filled with sand, complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab flooring, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete and rounding of edges if required, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab as in skirtings, dados, walls, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete and rounding of edges if required, fixed over and including 10mm thick plaster in CM 1:3, complete all as specified and directed.

M&L for marble strip, cut to width not exc 100mm wide, fixed as border as in floor, stair case, walk ways etc. including rubbing and polishing complete, laid/ fixed over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for reflective chequered ceramic tiles of size 30cm x 30cm x 9-10mm thick each as in floor with grey cement and pigments, set, jointed and pointed in neat cement slurry, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 16mm thick red/ black granite (of any type) stone slab, machine cut as in window cill, counter top slab, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edge complete, laid/ fixed over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed.

Demolition of un-reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work, complete all as specified and directed.

Providing and laying water proofing treatment to sunken portion of WCs, bathrooms, roof etc. by applying two coats of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm, this layer allowed to air cure for 4 hrs then applying slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm and allowed to aircure for 4 hrs and joints seal with sealing compound as approved by GE, complete all as specified and directed. Notes :- (a) Before laying of cement concrete, joints of trap/ WC/ Soil pipes shall be properly sealed with sealing compound of Roofex/ Forre/ FOSROC and provn of 'P' or 'S' trap & Nahani/ floor traps with long arm and also provn of spout of 40mm dia.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces or roof surfaces in CM 1:3, finishing the surface even and smoot without using extra cement, complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, suitable for 75mm bore pipe, complete all as specified and directed.

M&L for repair of doubing roof / chajjas / facias/ plaster on brick work / plaster on cement concrete with 20mm thick cement plaster in CM 1:3 and finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item.

Supply only integral water proofing compound, complete all as specified and directed.

S&F 5mm thick (HL Series) insulated PVC wall lining honeycombed consisting of PVC insulated panels (As approved by GE) with approved design & pattern duly fitted into the wall including PVC angle, jointers, 'U' jointers, beading etc. as required at the edges including removing and re-fixing electric boards & plates and covered with PVC strips or beading after fixing wall paneling, complete all as specified and directed.

S&F 12mm thick toughned glass as in hinged doors, partition, automatic doors, etc. and similar work including cutting to shape, drilling holes as required, complete all as specified and directed.

Providing and fixing power coated aluminium (minimum thickness of power coating 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprane gasket required (fitting shall be paid for seprately) with extruded built up standard tubular section / appropriate 'Z' section and other section of approved make conforming to IS:733 and IS:1285 fixing with dash fastner of required dia and size including necessary filling up the gaps at junctions i.e. top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight mitred and jointed mechanical wherever required including cleat angle, aluminium snack beedingfor glazing/ panneling, CP brass/ stainless steel screws, complete as per architectural drawing and the direction of Engineer-in-Charge.

S&F in replacement of curtain rod stainless steel knobs, onion shape or any other shape as required, complete all as specified and directed.

S&F in replacement curtain rod stainless steel brackets of required site, complete all as specified and directed.

Checking of plumbing work, mason work and joinery (wooden/ steel) iron/ aluminium mongery, pelmet box, door springs etc. requiring carpentry/ plumbing/ mason work and carrying out minor repairs such as tightening of screws/ nails, minor adjustment of joinery, door/ windows, water taps, stop cocks, water tank, water supply pipe line etc. by means of planer/ chisling etc. including petty repairs material like screws, nails, plug, cement, sand, aggregate etc. to make it functional, complete all as specified and directed. Notes :- (a) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. (b) The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /JE-in-Charge/ Engr-in-charge daily and all complaint will be rectified by the contractor within same day then the returned the complaint slip after completion of complaint and get recipt from concered JE/Engr-in-charge. If he fails to complete the work within same day then recovery will be made @ 250.00 per day per complaint .

KUMAR CONSTRUCTION CO (BID ID -3503887)

M/S GURU DEV BUILDERS (BID ID -3503694)

M/S SHREE RAM DUBEY AND SONS (BID ID -3509702)

MAHAJAN TRADING CO (BID ID -3509662)