Repairing and Improvement of Work for 33KV Line Jalilpur, 33KV Line Pipalsana to Sisouna, 33KV Line Pipalsana to Laddupura, 33KV Line M/S Annersail Aloye Industrial, 33KV Line Adarsh Nagar, District Bijnor.

Note :- Except centralised materials, all required decentralised materials shall be provided by contractor as per RESPO NORMS with approved GTP/DI. Carriage/ Loading & Unloading of Material from any Store Centre under PVVNL, depending upon the availability of material, to site. (For S.no-1.01 to 1.05) 1.01- 9 Mtr. PCC Pole

11 mtr. Long STP, SP-55 round Pole.

13 mtr. Long STP, SP-72 round Pole.

All other Material except Poles (33KV & 11KV Pin, Disc/Fitting, Pin Insulator, ACSR DOG/Rabbit Conductor)

3x300 / 3x185sqmm XLPE Cable (33KV & 11KV)

The excavation of foundation pit in mix soil/normal soil/soft & hard rock and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support and Erection of support in the pit, after fixing stone pad including providing of stone pad size 300x300x75mm as per Respo Norms. The work includes carriage and handling of supports from sectional store to pit site as well as fabrication work if required. ( For S. No-2.01 to 2.03) 2.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

13M Long STP, SP-72 Round Pole (Single Pole)

Providing of Earthing of supports with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S.Rod 3.0M apart from suppor and 0.5M below the ground level and connecting belowl the earth electrodes with the help of G.I.wire No.8SWG and including providing & fixing of earthing lugs. Every support & Matelic parts shall be be earth. Respo Drawing no.-DD&SO-27 ( For S. No-3.01 to 3.03) 3.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

13M Long STP, SP-72 Round Pole (Single Pole)

Providing of 33KV X-arm 100x50x6mm (M.S Channel) F-Clamp made of M.S Flate of size 75x10mm and Fixing of 33KV V-type cross arm 100x50x6mm, 33KV F-bracket, 33KV Pin Insulator, 33KV Pin including providing of required clamps, nut & bolt as per Respo Norms. Respo Drawing No.-DD&SO-21Cross arm clamp, F-Clamp made of M.S flate of size 75x10mm ( For S. No-4.01 to 4.03) 4.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

13M Long STP, SP-72 Round Pole (Single Pole)

The work includes carriage and handling of required accessories, from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.5mtr, from M.S.Angle 65x65x6mm/ 50x50x6mm, E-bracket, Disc insulator, top channel 125x65mm, 3200mm, T-off 125x65mm 1600mm, 33KV Disc fitting, 33 KV pin insulator, 33KV Pin etc including providing of E-brackets, required clamps, Nut & bolts as per Respo Norms/ as per schedule with required accessories. Providing as per Respo Drawing No.-DD&SO-20 Cross arm clamp, F-Clamp, Top Channel clamp, made of M.S flate of size 75x10mm, Bracing clamp made of M.S flate of size 65x8mm with Providing of X-bracing 4.5Mtr (M.S Angle 65x65x6mm, Top channel 125x65x6mm 3200mm long, Dropper channel 100x50x6mm 3200mm, T-Off 125x65, 1600mm, E-bracket and other requirement material. 5.01- 9M Long PCC Pole (Double Pole Structure)

Grouting of supports in CC 1:4:8 (Cement, sand & 40mm brick ballast). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grit) with muffing as per Respo Norms including providing of requried material. Providing of Ston Pad 300x300x75mm, Work includes back filling and proper ramming. (For S. No- 6.01 to 6.03) 6.01- 9M Long PCC Pole (Single Pole)

11 mtr. Long STP round Pole. (Single Pole)

13M Long STP, SP-72 Round Pole (Single Pole)

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with Line chart including binding and fixing of all accessories in 03Nos. Conductor in parallel. Existing tilted Poles to be made straight, if required.

Providing of required quantity of 6SWG, 8SWG & 16SWG, GI wire & Guarding angle 75x75x6mm with eye bolt and Guarding between two poles like single poles, double poles, Tri pole, four poles, etc. to guard L.T., 11KV Line telephone and river crossing, road crossing etc. with G.I.wire No.6SWG and G.I.wire No.8SWG, including cutting with fabrication and fixing of guarding angle 75x75x6mm, including providing of requried clamps, nut & bolts, eye bolts etc, as per Respo Norms. Guarding clamp made of M.S Flate 65x8mm.

Providing of danger board at each location as per specification of the respo norms.

Fixing of danger board at each location as per specification of the respo norms.

Providing of Number Plate at each location as per specification of the respo norms.

Fixing of Number Plate at each location as per specification of the respo norms.

Providing of barbed wire on 33KV SP-72/SP-55 ST Poles/PCC Poles, as anti-climbing device.

Wrapping of barbed wire on 33KV SP-72/SP-55 ST Poles/PCC Poles, as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing & fixing of lower end & upper end clamps, made of M.S.Flat 40x5mm complete with nuts & bolts as per respo norms.

Painting of following supports/structures of 33KVLine, with two coats of synthetic enamel aluminium paint after one coat of ready mix primer, including provididng of all material (red oxicide and Aluminium paint), as well as rubbing/cleaning of surface as required for proper completion of work . (For S. No-15.01 to 15.02) 15.01- Single Supports (11Mtr SP-55 Poles including all channels/x-arms/clamps etc)

Single Supports (13Mtr SP-72 Poles including all channels/x-arms/clamps etc)

Digging of trench size 1050x750mm and Safely laying of 02No., 3x300Sq.mm. XLPE Cable in cable trench between one Double pole to other side of Double Pole. (For S. No .16.01 to 16.08)

Laying of Ist Class Bricks, along the length on both side of 2 Nos 33KV XLPE Cable in Cable Trench (minimum 25No. Bricks/Mtr per Cable) and Stone Slab of size 450x600x50mm, on top of the each Cable, including providing &filling River Sand inside the Bricks as per norms.

Back filling of excavated earth in the cable trench upto the ground level and ramming properly.

Providing 150mm dia 3Mtr long G.I.Pipe with requried clamp over 33KV, 3x300Sq.mm. XLPE cable.

Fixing 150mm dia 3Mtr long G.I.Pipe over 33KV, 3x300Sq.mm. XLPE cable before mounting the 4Nos. cable on double pole. Work includes fixing of clamp, sealing of top and bottom end of the G.I.Pipe. One end of G.I.Pipe is to be buried under earth about 500mm as per respo norms.

Providing & Making of 33KV 3x300sqmm outdoor type heat shrinkable XLPE Cable jointing Kits and crimping of proper size aluminium lugs. Work includes providing insulating tapes etc. as per specifications.

Laying of 3x300Sq.mm XLPE cable in the air and mounting and clamping 4Nos.33KV XLPE boxes on double pole structure and making connection with 33KV overhead lines at both ends.

Providing & Fixing of "cable route marker" along the route of 33KV cable at both ends of railway crossing/Road crossing/Line crossing.

Removing & Dismentling old Rabbit/Weasel conductor

Carriage of Received back material for concern store centre (PVVNL) : (For S. No-18.01 to 18.02) 18. 01 Aluminium Scrap ACSR

M.S Meltable Scrap

Providing & fixing of G.I Angle 75x75x6mm, 3200mm long for cable G.I pipe 150mm dia 3mm thick, nut, bolt & washer.

P&H Engineering