Periodical services and camouflaging painting to certain buildings of Tech Area at AF Stn Nal under GE (AF) Nal

Amount

Taking down cement plaster up to any height including raking out joints, hacking for key and scrubbing down with water etc to receive plaster complete all as specified and directed.

Material and labour rendering 15mm in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm in cement mortar 1:4 on fair faces of brick / concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm in cement mortar 1:3 on fair faces of brick /concrete surface of ceilling and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of approved primer complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of exterior acrylic emulsion in camouflage pattern of approved tint / shade(s) over a coat of primer exterior grade complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceilling / chajja or similar suspended work and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Demolition of reinforced cement concrete of any description in chajjas, parapet wall and similar suspended work and removing to outside MoD land complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work n.exc 200mm thick horizontal or sloping complete all as specified and directed.

M&L formwork to edges of concrete flats, treads, slabs, floor and roofs n.exc 20cm wide and sides of RCC/PCC bends in walls, horizontal or sloping, chajjas and similar work exc 10cm but n.exc 20 cm wide complete all as specified and directed.

S&F mild steel deformed TMT bars 8 mm dia and over cut to length & bent to shape required including cranking bending spirally for hoping for column, hooking ends & binding with mild steel wire not less than on 0.9 mm dia or securing with clips complete all as specified and directed.

M&L cutting chases pining in concrete surfaces and making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sun shades slabs not exc 10cm girth complete all as specified adn directed.

M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in chajjas upto any height complete as specified and directed. Note: Reinforcement shall be be measured and paid for separately.

M&L : repair to soffit of RCC slabs and similar works by dismantling of loose / disintegrated portion of RCC at any height and in any situation (including provn of support, formwork and welding of reinforcement and providing with weld mesh of weight not less than 3 kg / sqm, applying cement slurry @ 3.00 Kg/Sqm, applying dubbing 1st coat of 20 to 25mm thick in cement mortar 1:3 finished rough and then a finishing coat of 10mm thick in cement mortar 1:3 finished even and smooth without using extra cement after and applying three coats of white wash complete all as specified and directed. Note : (i) Unit rate of this items includes the cost of necessary T&P, scaffolding, form work, weld mesh etc and nothing extra shall be paid on account of variation in heights.

M&L preparation of old decorated distempered and painted surfaces of walls (plastered or unplastered) including all cornices pilasters etc by brooming down or steel wire burshing, scraping down smoke, soot, moulds, moss and efflorescence salts, trading oil and greasy spots etc incl washing, rubbing down and stopping and applying one coat of exterior acrylic emulsion in camouflage pattern as approved upto any height complete all as specified and directed and directed. Note: Contractor shall procure 50% of exterior emulsion required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained.

All as per description of serial item No. 16.00 here in before but two coats of exterior acrylic emulsion in camouflage pattern as approved.

M&L Writing letter / figure (Block, Roman, Italic or Indian) with fluorescent synthetic enamel paint, height of each letter / figure 25cm, width 20cm and width of writing flow 40mm complete including scrapping off the existing letter / figure and making good the surface to match the adjoining finish all as specified and directed.

M&L preparation of old painted surfaces of any description not other wise described including filling the depressions with cement based wall care putty and applying one coat of plastic emulsion paint interior grade with roller finish (plain) or with suitable brush complete all as specified and directed.

M&L preparation of old decorated surfaces of walls (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of white wash complete all as specified and directed.

All as per description of serial item No. 20.00 here in before but two coats of white wash.

M&L preparation of old decorated surfaces of ceiling (plastered or un-plastered) by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of white wash complete all as specified and directed.

All as per description of serial item No. 22.00 here in before but two coats of white wash.

M&L preparation of old decorated surfaces of walls (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of oil bound distemper complete all as specified and directed. Note: Contractor shall procure 50% of oil bound distember & putty required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained.

All as per description of serial item No. 24.00 here in before but two coats of oil bound distemper.

M&L preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed. Note: Contractor shall procure 50% of synthetic enamel paint required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained.

M&L preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamal paint of tint / shade as approved complete all as specified and directed. Note: Contractor shall procure 50% of synthetic enamel paint required for entire work of this item within 15 days of Date of Commencement of Work and shall keep in safe custody as directed by Engineer-in-Charge for incorporation in the works. The tenderer shall keep this aspect in mind while quoting the rates. Nothing extra on this account shall be entertained.

M&L preparation of old painted steel surfaces of any description not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed.

M&L complete removal of existing treatment on walls and applying two coats of interior acrylic emulsion over and including one coat of primer over a layer of 3 mm thick cement based wall care putty including filling in cracks etc to achieve a uniform even & smooth finish incl preparation of surfaces complete all as spacified and diricted.

M&L removal of existing treatment on walls and applying two coats of interior acrylic emulsion in clay brick finish or texture / granular pattern with specific roller / brush over and including one coat of primer 3 mm thick cement based wall care putty in two coats including filling in cracks etc to achieve a uniform & smooth finish incl preparation of surfaces complete all as spacified and diricted. Note:- i) The mode of measurement shall be the finished putty surface not the painting. ii) Painting can be of any size and shape as directed within the puttied surface only. iii) preparation of each coat of putty surface incl rubbing/sand papering all shall be inclusive in the quoted rate.

Hacking out old broken glass (any thickness, size quality or description) from wooden frame or stone concrete or bricks surrounds glazed with putty or fixed with bead complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specifed and directed.

S&F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specifed and directed.

S& F as in repairs door seal with aluminium section 17mm x 7mm x 1mm thick with built-in groove to hold and including PVC pile 5mm wide having soft wool brush 12mm wide x 1mm thick (pressed thickness) fixed to doors with screws complete all as specified and directed..

S& F as in repairs PVC pile 5mm wide having soft wool brush 12mm wide x 1mm thick (pressed thickness) fixed to existing aluminium door section complete all as specified and directed.

S&F as in repairs turbo ventilators stainless steel 304 grade, throat dia 600mm, with double bearing, fixed on roof at a height exc 10 m but n exc 15 m complete all as specified and directed. Note : T&P required to fix the turbo ventilator at the height specified shall be arranged by the contrator at his own and he is advised to keep it mind while quoting his rates.

Taking down existing turbo ventilators 600mm throat dia a from roof at a height exc 10 m but n exc 15 m and refixing in same position after and including cleaning, oiling, greasing and making in servicavle condition complete all as specified and directed. Note : T&P required to take down and re-fix the turbo ventilator at the specified height shall be arranged by the contrator at his own and he is advised to keep it mind while quoting his rates.

m/s gaurav enterprises

Vijay Enterprises