PROVN OF INSTRUCTION SHED FOR MISSILE TRAINING IN TRG AREA AT BHALUKMARA UNDER GE JORHAT.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified.

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out etc complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in soft/loose soil etc complete all as specified and as directed.

Removing excavated materials (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Earth ( excavated soil ) filling in floors etc including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in soft/loose soil etc complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation , filling and mass or lean concrete etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in Columns, pillars, piers,posts and struts etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers,bressummers, lintels over 1.5m span etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in Chajja etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for Formwork to chullah hoods, chajjas,troughs and similar items including edges etc. complete all as specified and as directed.

M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions etc. complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter etc. complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for clean and dry river Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate) as in floor , finished even and smooth etc complete all as specified and as directed.

M&L for Non - Skid ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement sand mortar (1:4), complete all as specified and as directed

M&L for Glazed ceramic coloured digital tiles, 300 X 200 or 450 mm X 350 mm , 7mm thick , on vertical surfaces of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement sand mortar (1:4), complete all as specified and as directed.

M&L for Non - Skid ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,conforming to IS 15622, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement sand mortar (1:6), complete all as specified and as directed

M&L for Non - Skid ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,conforming to IS 15622, in skirting / dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement sand mortar (1:4), complete all as specified and as directed

M&L for Brick work with sub class‘B’ bricks,straight or curved on plan exc 6m mean radius, built in cement sand mortar 1:6 etc complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement sand mortar 1:4 etc complete all as specified and as directed.

S&F mild steel work as in tubular trusses , purlins, and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

S&F mild steel work as in clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed.

M&L for Mild steel TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.

M&L for Mild steel TMT bars, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders confirming to Fe 500D complete all as specified and directed.

S&F Pressed steel frames 105 X 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and as directed.

S&F Pressed steel frames 125 X 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and as directed.

S&F factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and as directed.

S&F factory made Steel ventilator with top hung shutter including hinges, steel peg stay, complete etc complete all as specified and as directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete etc complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded aggregate as in fixing of hold fast etc complete all as specified and as directed.

S&F 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete etc complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directed.

S&F Factory made solid panel wire gauge PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling shall be of wire gauge .The wire gauge shall be wrapped on an additional square 8 mm MS soild tube . Wire gauge shall be stretched to tightened firmly,fixed in the frame at site etc complete all as specified and as directed.

S&F 100 mm Butt hinges, stainless steel ,medium weight cold rolled mild steel complete all as specified and directed

S&F Aluminium anodised barrel tower bolt, extruded type, 150 mm long, complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt, extruded type, 200 mm long, complete all as specified and directed.

S&F Aluminium handles, cast type, anodized, 150 mm size, complete all as specified and directed.

S&F 3 mm thick sheet glass and glazing with oil putty in squares not exceeding 0.50 sqm in each pane etc complete all as specified and as directed.

S&F 4 mm thick sheet glass and glazing with oil putty in squares not exceeding 0.50 sqm in each pane etc complete all as specified and as directed.

S&F Aluminium alloy, 300 mm long ,anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring ,fixed in floor , overall length of cover plate 150 mm etc complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and as directed.

S&F MS helical door spring 300 mm with roller and roller plate etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

M&L for false ceiling with powder coated exposed GI grid suspensionsystem ( E-grid T-2420 or equivalent of armstrong having load carrying capacity of 12.5 Kg/Sqm with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm C/c ) consisting of main runner 3600 mm long,cross tee 1200 / 600 mm long and wall angle. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall with stainless steel screws at a interval 300 mm C/c.The main runners to be placed @ 1200 mm, the cross tee of 1200 mm shall be inserted in the pre cut slots of main runner at regular interval of 600 mm to form a modular grid of 1200 mm x 600 mm.Additional cross tee of 600 mm shall be placed perpendicular to the cross tee 1200 mm long to form grid of size 600 mm x 600 mm with and including 6 mm thick HPSC ( High Pressure Stem Cured) oceanic , pre-primed, self embossed , textured designer board , water , termite and fire resistant for insulation and accoustic purpose to be placed in the grid system duly suspended with 2 to 3 mm dia GI wire hangers fixed with steel dash through fasteners from purlin with butterfly clips ( weight 0.007 Kg / clip) , hold down clips ( weight 0.0035 kg / clip) with provn of light fittings and fixtures etc complete all as manufacturer's instruction ,specified and shown on page No XIV & XV of SSR Part - II ( Rates) and as directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in plinth protection including finishing surface even and smooth without using extra cement , complete all as specified and as directed.

M&L for Hardcore (crushed stone) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

M&L for Plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate as in surface channels and drains including necessary formwork etc complete all as specified and as directed.

M&L for 25 mm thick Damp proof course in cement sand mortar 1:2 mixed with intrgral water proofing compound @ 3% by the weight of cement ,applied to horizontal or vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and as directed.

S&F PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length including 450 mm long PVC connection and making connections and good to disturbed surface with cement sand mortar 1:3 complete all as directed by Engineer-in-Charge Make:- Prayag cat part no.701 or equivalent make in Parryware / Hindware.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 450 mm long etc complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag / Parryware / Hindware.

S&F CP bib cock 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make:- Prayag cat part no. 8306 or equivalent make of Parryware / Hindware / Jaquar.

S&F 15 mm bore stop cock ,cast copper alloy with long shank and cup , screwed both ends for iron pipes etc complete all as specified and directed. Make:- Hindware / Parryware / Prayag / Jaquar .

S&F 15 mm bore chromium plated angle / stop valve with crutch handle ,fancy type , screwed both ends for iron pipes etc complete all as specified and directed.Hindware cat part no. F200005FT or equivalent make of Parryware / Prayag.

Supply , laying and connection, GI water tubing , 15 mm bore , medium grade, including new GI fittings such as tee, bend, nipple, socket, reducer, flange, union etc complete all as specified and as directed by Engr in Charge.

Supply , laying and connection, GI water tubing , 20 mm bore , medium grade, including new GI fittings such as tee, bend, nipple, socket, reducer, flange, union etc complete all as specified and as directed by Engr in Charge.

S&F chromium plated shower rose 125 mm size with or without swivel joint of any size etc complete all as specified and as directed.Make:- Prayag cat part no. B0S-05 or equivalent make of Parryware / Hindware.

S&F brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia , D type etc complete all as specified and as directed.Make:- Prayag cat part no. BA-30 or equivalent make of Parryware / Hindware.

S&F Rotational moulded polyethylene 500 ltrs capacity water storage tanks ,white or black colour , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including 20 mm PTMT ball valve high pressure with polythene float and nut etc complete all as per SSR Part-I ,specified and as directed.Make:- Polycon / Polytuf / Sintex.

S&F Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm ,white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag cat part no. 4054 or equivalent make of Pearl / Hindware.

S&F Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and etc complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag cat part no. 4645 IRIS or equivalent make of Pearl/ Hindware.

S&F Vitreous China Urinal, Half stall type,white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and as directed.Make :- Hindware Cat part No. 60002 or equivalent make in Prayag / Parryware / Jaquar.

S&F 50 mm dia ,PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate etc complete all as specified and as directed.

S&F PVC (SWR) pipes , 110 mm bore , single socketed in any length with rubber ring joints fixed to walls with necessary clamps etc complete all as specified and as directed.Make:- Supreme / Prayag / Kanha / Prince

S&F Soap dish , chromium plated ,fixed to wall with galvanised screws etc complete all as specified and as directed.Make:- Jaquar Cat part no .AQN-7331 or equivalent make in Prayag / Hindware / Parryware.

S&F Gun-metal, globe or gate valves 15 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make:- BIR / Prayag / Zoloto

S&F Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make:- BIR / Prayag / Zoloto

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel or iron surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.

M&L for Rendering 15 mm thick, cement plaster, in cement sand mortar (1:6) on unfair face of brickwork and finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Rendering 5 mm thick, cement plaster, in cement sand mortar (1:4) mixed with water proofing compound @ 3% by the weight of cement used or as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound shall be measured and paid separately)

Supply only integral water proofing compound ISI marked etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wall and applying two coats of oil bound distemper over and including a coat of wall primer etc complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wall including cornices , pilasters and applying two coats of cement base paint over and including a coat of suitable wall primer etc complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and Diameter of neck in mm 11 to 15 mm etc complete all as specified and as directed.

S&F Rolled mild steel sections as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete Fe-410-W.Gde-E-250 ,quality A complete all as specified and as directed.

Excavation over areas in soft/loose soil n.exc 1.5m in depth; for foundation etc. and getting out etc complete all as specified and directed

Excavation over areas in soft/loose soil exc 1.5m in depth but n.exc. 3.0 m and getting out etc complete all as specified and directed

M&L for plain cement concrete (1:3:6) type C-2 using 20 mm graded aggregate as in foundation of manholes and similar works etc complete all as specified and as directed.

M&L for 75 mm thick Plain cement concrete (1:2:4) type B-2, using 20 mm graded aggregate as in bed or sub base etc complete all as specified and as directed.

M&L for Brick work with sub class‘B’ bricks, well kiln burnt , straight or curved on plan exc 6m mean radius, built in cement sand mortar 1:4 etc complete all as directed.

M&L for Rendering 15 mm thick, cement plaster mixed with water proofing compound, in cement sand mortar (1:4) on internal faces of brickwork ( Manholes ) and finishing surface even and smooth without using extra cement, complete all as specified and directed.Note:- WPC compound shall be measured and paid seperately under relevant item.

M&L for Rendering 20 mm thick, cement plaster mixed with water proofing compound, in cement sand mortar (1:4) on internal faces of brickwork ( septic tank ) and finishing surface even and smooth without using extra cement, complete all as specified and directed.Note:- WPC compound shall be measured and paid seperately under relevant item.

M&L for Rendering 15 mm thick, cement plaster in cement sand mortar (1:4) on fair faces of brickwork ( Manholes ) and finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Precast Reinforced cement concrete (1:1.5:3) type A-1 using 20 mm graded stone aggregate as in landings , slabs , cover slabs ( for manholes etc) shelves and similar articles , set in cement sand mortar 1:4 etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in walls etc complete all as specified and as directed.

M&L for Mild steel TMT deformed bars, 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.

M&L for Plain cement concrete (1:2:4) type B-2, using 20 mm graded aggregate as in channel and benching of manholes including necessary formwork etc complete all as specified and as directed.

S&F PVC (SWR) Pipes 110 mm bore heavy duty single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.Make:- Supreme / Prayag / Kanha / Prince

S&F PVC (SWR) Pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.Make:- Supreme / Prayag / Kanha / Prince

S & F PVC (SWR) vent cowl 110 mm bore etc complete all as specified and as directed.Make:- Supreme / Prayag / Prince

S & F PVC (SWR) vent cowl 75 mm bore etc complete all as specified and as directed.Make:- Supreme / Prayag / Prince

S & F PVC (SWR) junction single,(Single T ) equal or unequal , 110 mm bore with access door etc complete all as specified and as directed.Make:- Supreme / Prayag / Prince

M&L for Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in concrete bed in to drain pipes 110 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in etc complete all as specified and as directed.Make:- Supreme / Prayag / Kanha / Prince

M&L Point wiring ( Concealed type) with single runs PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including 20 mm PVC conduit medium duty of suitable size with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked) as continuous earth wire terminated in and including sunken box for following type of point wiring including making good disturbed of wall complete all as specified in SSR Part-I, 2009 and Part-II, 2010 and as directed by Engineer-in- Charge for one light point / one 3 pin socket outlet 5/6 Amps and one bell point on independent board controlled by one one way switch. Note:- Cutting / chasing in brickwall / concrete wall for concealed wiring shall only be done with chase cutter machine.

All as per Item No.103.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 2.5 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5 Amps complete all as specified and directed.

Supply and fix Switch socket combination (ISI marked), 3/5 pin and 5 / 15 Amps, flush type, 240 volts complete all as specified and as directed.

S&F Decorative ultra slim linear LED batten light fitting with co extruded polycarbonate body enviornmental friendly, energy efficient , E-LITE LED GREEN suitable for 20/22 watt LED 6000K , 240 volts LED tube light ( single side connection ) including 1 x 22 watt LED tube rod etc complete all as specified and directed.Make:- Wipro / Havells / Philips / Crompton / Bajaj.

S&F Exhaust fan , metallic heavy duty AC single phase 230 / 240 volts , four blades, sweep not less than 300 mm and making necessary electric connection with FRLSH flexible copper conductor cable 1.5 sqmm 3 core PVC insulated etc complete all as specified and as directed. Make:- Crompton cat part no EXHD38-4-1 or equivalent make in Usha / Havells / Bajaj. Note:- Cost of cutting holes of appropriate size in brick wall and making good to disturbed surfaces with cement sand mortar 1:4 and necessary painting work as per existing including and fixing arrangements are deemed to be inclusive in quoted rate against ibid item.

Supply and fix MCB Distribution board , 240 volts Single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer -in- Charge . Make : Havells, Cat Part No:DHDPSHODRW08 or Legrand Cat part No 5076-10 or equivalent model from make:- Siemens / Schneider / L&T.

Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Make: Havells Cat Part No:DHMGCSPF006-032 or Legrand Cat part No 603231 37 or equivalent model from make:- Schneider / Legrand.

Supply and fix MCB SPN, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Make: Havells Cat Part No:DHMGCSNF040 or Legrand Cat part No 603248 54 or equivalent model from make:- Schneider / L&T

S&F Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

S&F New generation energy saving building security light luminiries housing of versatile pressure die cast aluminium IP-66 with high power LED light 25 watt 230 volts 50 Hz with ballast / charging unit including all accessories , pre-wired including connecting up with 2.5 sqmm multi stranded aluminium conductor 2 core cables not less than 3 m length ,fixed to pole / wall etc and testing etc complete all as specified and directed.Make:- Wipro Cat part No LR02-291-XXX-57-XX or equivalent make in Havells / Crompton / Bajaj.

Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth wire , 4 mm dia ( No 8 SWG) . by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009)

Supply and fix or hang Ceiling fan of 1400 mm sweep ,eletrically driven ,energy efficient , 50 W or less power consumption,white in colour,making electric connection with flexible copper conductor cable 1.5 sqmm 3 core PVC insulated , with all hanging arrangement to ceiling etc complete all as specified and as directed. Make:- Havells Model ES-50 white or Usha model ENERGIA ISI or equivalent make in Crompton / Bajaj . Note:- Contractor shall produce manufacturer's warranty certificate of ceiling fan of time period not less than two years.

S&F Electronic fan regulator flush type , 4 step type , 120 W , AC , 240 volts , 50 Hz , etc complete all as specified and as directed.Make:- Havells / Anchor / Crompton.

Supply, laying , connecting and testing XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 25 Sqmm 2.0 Core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing including necessary cable glands, lugs etc complete all as specified and directed .

Supply and laying Sub class 'B' well burnt brick, laid flat in trenches as protection to LT XLPE cable complete all as specified and as directed.

M&L for Sand cushioning with dry clean river sand for protection/covering of under ground cable in trenches complete all as specified and directed by Engr-in-Charge. Note:- Punned thickness only shall be measured for payment.

M/S GOPAL ROY AND CO

MS J B CONSTRUCTION AND CO