Enhancement in Capacity of Electrical Horizontal Centrifugal Pumps at Malikpur Pumping station under Najafgarh Zone

Amount

P&F M.S.Black pipe heavy C-Class confirming to IS: 1239 Part-1(2004) with required nut bolts & packing sheet etc complete as required of-Dia 80 mm

P&F M.S.Black pipe heavy C-Class confirming to IS: 1239 Part-1(2004) with required nut bolts & packing sheet etc complete as required of-Dia 125 mm

P&F M.S.Black pipe heavy C-Class confirming to IS: 1239 Part-1(2004) with required nut bolts & packing sheet etc complete as required of-Dia 150 mm

P & F M.S.Black pipe confirming to IS: 3589 with required nut bolts & packing sheet etc complete as required of-Dia 350 mm, 8 mm Thick

P & F M.S.Black pipe confirming to IS: 3589 with required nut bolts & packing sheet etc complete as required of-Dia 600 mm, 8 mm Thick

P&F of M.S. Flange with required nut bolts & packing sheet etc complete as required of Dia 80 mm (8 mm thickness)

P&F of M.S. Flange with required nut bolts & packing sheet etc complete as required of Dia 125 mm (13 mm thickness)

P&F of M.S. Flange with required nut bolts & packing sheet etc complete as required of Dia 150 mm (16 mm thickness)

P& F of M.S. Flange with required nut bolts & packing sheet etc complete as required of following Dia:-350 mm, (25 mm thickness)

P& F of M.S. Flange with required nut bolts & packing sheet etc complete as required of following Dia:-600 mm (25 mm thickness)

P& F of M.S. Blank Flange with required nut bolts & packing sheet etc complete as required of following Dia:- 600 mm (25 mm thickness)

P& F of M.S. Bend with required nut bolts & packing sheet etc complete as required of following Dia:-80 mm, 4.85 mm thick, 0.3 m

P& F of M.S. Bend with required nut bolts & packing sheet etc complete as required of following Dia:-125 mm, 5.4 mm thick, 0.5 m

P& F of M.S. Bend with required nut bolts & packing sheet etc complete as required of following Dia:-150 mm 5.4 mm thick, length 0.5 m

P& F of M.S. Bend with required nut bolts & packing sheet etc complete as required of following Dia:-350mm, 8 mm thick

P& F of M.S. Bend with required nut bolts & packing sheet etc complete as required of following Dia:-600 mm, 10 mm thick, length 0.5 m

Supply of corrugated & chequered rubber mat having thickness 25 mm and size in 1M X 2M

Supply, installation, testing and commissioning of submersible pump set having discharge capacity min 3600 LPM (app), head 12 meters, for dewatering water with solids upto 125 mm, 11 KW,15 HP, 4 pole squirrel cage, 1450 rpm, 415 Volts, 3 Phase AC supply complete as required.

Providing and fixing of water proof EPR insulated, single sheathed copper conductor flexible cable size 7 core - 4 sqmm + 2 core - 1 sqmm for submersible pump set

Supply, installation, testing and commissioning of control panel in sheet enclosure for above pump set comprising of ammeter, voltmeter, star-delta contactor, overloadrelay, MCCB 160 amps, single phase preventor indicating lamps duly wired and painted.

P&F of CI Swing Type Non Return Valve Flanged end as per IS 5312 Body cover -CI IS -210 ,GR FG 260 Door -CI IS -210 ,GR FG 260 body Ring - Bronze IS -318 Gr LTB2 door face Natural rubber Hinge Pin -SS ASTM A276 & type 410 Fasteners-CS IS 1367 CL -4.6/4.0 Gasket -Natural Rubber Flange Drilling -IS :1538,Table 4 & 6 (PN 1.6) NRV 80 MM

P&F of CI Swing Type Non Return Valve Flanged end as per IS 5312 Body cover -CI IS -210 ,GR FG 260 Door -CI IS -210 ,GR FG 260 body Ring - Bronze IS -318 Gr LTB2 door face Natural rubber Hinge Pin -SS ASTM A276 & type 410 Fasteners-CS IS 1367 CL -4.6/4.0 Gasket -Natural Rubber Flange Drilling -IS :1538,Table 4 & 6 (PN 1.6) NRV 125 MM

P&F of CI Swing Type Non Return Valve Flanged end as per IS 5312 Body cover -CI IS -210 ,GR FG 260 Door -CI IS -210 ,GR FG 260 body Ring - Bronze IS -318 Gr LTB2 door face Natural rubber Hinge Pin -SS ASTM A276 & type 410 Fasteners-CS IS 1367 CL -4.6/4.0 Gasket -Natural Rubber Flange Drilling -IS :1538,Table 4 & 6 (PN 1.6) NRV 150 MM

P&F of CI Swing Type Non Return Valve Flanged end as per IS 5312 Body cover -CI IS -210 ,GR FG 260 Door -CI IS -210 ,GR FG 260 body Ring - Bronze IS -318 Gr LTB2 door face Natural rubber Hinge Pin -SS ASTM A276 & type 410 Fasteners-CS IS 1367 CL -4.6/4.0 Gasket -Natural Rubber Flange Drilling -IS :1538,Table 4 & 6 (PN 1.6) NRV 350 MM

P&F of Cast Iron Non rising sluice valve Flanged end as per IS Body cover IS -14846 , body dome - wedge-CI IS 210 ,GR FG260 Body & Wedge Rings -Bronze IS 318 GR :LTB2 Spindle -SS IS 6603 Gr 12Cr 12 gland Packing -Greasy Jute Packing fasteners - CS IS 1367 , CL -4.6/4.0 Gasket -Natural Rubber Flange Drilling -IS :1538,Table 4 & 6 (PN 1.6) SV 80 MM

P&F of Cast Iron Non rising sluice valve Flanged end as per IS Body cover IS -14846 , body dome - wedge-CI IS 210 ,GR FG260 Body & Wedge Rings -Bronze IS 318 GR :LTB2 Spindle -SS IS 6603 Gr 12Cr 12 gland Packing -Greasy Jute Packing fasteners - CS IS 1367 , CL -4.6/4.0 Gasket -Natural Rubber Flange Drilling -IS :1538,Table 4 & 6 (PN 1.6) SV 150 MM

P&F of Cast Iron Non rising sluice valve Flanged end as per IS Body cover IS -14846 , body dome - wedge-CI IS 210 ,GR FG260 Body & Wedge Rings -Bronze IS 318 GR :LTB2 Spindle -SS IS 6603 Gr 12Cr 12 gland Packing -Greasy Jute Packing fasteners - CS IS 1367 , CL -4.6/4.0 Gasket -Natural Rubber Flange Drilling -IS :1538,Table 4 & 6 (PN 1.6) SV 350 MM

P &F of Ball Valve with Flange Confirming to IS-9890-1981 (Three piece design) of following size Ball valve 80 mm , class 125

supply installation, testing and commissioning of fully automatic Star Delta Motor Starter in sheet steel enclosure Type MN with SPP feature i/c connections etc. complete as required. 75 hp

supply installation, testing and commissioning of fully automatic Star Delta Motor Starter in sheet steel enclosure Type MN with SPP feature i/c connections etc. complete as required. 40 hp

SITC of Electrical Horizontal Centrifugal Pump Set with non clog impeller to handle storm/ mixed/ sewage water having:- Rating: min. 40 HP Discharge: min. 350 m3/hr at Head- min. 20 Mtrs RPM - 1450 ± 10% Suction and delivery size: 150 mm dia. Casing: CI Impeller: CI/ Brass Shaft: SS Model/Make: As per OEM Along with complete base frame coupled with 40 HP motor suitable with 3-phase, 415 volt, 50 Hz supply complete as required, complete with coupling, coupling guard, AVM pads, foundation bolts, etc.

SITC of Electrical Horizontal Centrifugal Pump Set with non clog impeller to handle storm/ mixed/ sewage water having:- Rating: min. 75 HP Discharge: min. 1620 m3/hr at Head- min. 8 Mtrs RPM: 985 ± 10% Suction and delivery size: 350 mm dia. Casing: CI Impeller: CI/ Brass Shaft: SS Model/Make: As per OEM Along with complete base frame coupled with 75 HP motor suitable with 3-phase, 415 volt, 50 Hz supply complete as required, complete with coupling, coupling guard, AVM pads, foundation bolts, etc.

SITC of Electrical Horizontal Centrifugal Pump Set with non clog impeller to handle storm/ mixed/ sewage water having:- Rating: min. 5 HP Discharge: min. 40 m3/hr, Head- min. 15 Mtrs RPM: 1450 ± 10% Suction and Delivery size: 80 mm dia. Casing- CI Impeller- CI/ Brass Shaft: SS Model/Make: As per OEM Along with complete base frame coupled with 5 HP motor suitable with 3-phase, 415 volt, 50 Hz supply complete as required, complete with coupling, coupling guard, AVM pads, foundation bolts, etc.

Onload changeover switch four pole in SS Enclosure mounted on MS frame, with advance neutral conforming to IS:13947 (Part-3) complete as required of 630 A

Onload changeover switch four pole in SS Enclosure mounted on MS frame, with advance neutral conforming to IS:13947 (Part-3) complete as required of 160 A

Onload changeover switch four pole in SS Enclosure mounted on MS frame, with advance neutral conforming to IS:13947 (Part-3) complete as required of 100 A

Onload changeover switch four pole in SS Enclosure mounted on MS frame, with advance neutral conforming to IS:13947 (Part-3) complete as required of 63 A

P &F of Bell Mouth with Flange Confirming to IS-9890-1981 (Three piece design) of following size 80 MM

P &F of Bell Mouth with Flange Confirming to IS-9890-1981 (Three piece design) of following size 150 MM

P &F of Bell Mouth with Flange Confirming to IS-9890-1981 (Three piece design) of following size 350 MM

Supply of Antivibrating Cushy Foot Mounting of following size B-Series

Supply of Antivibrating Cushy Foot Mounting of following size S-Series

S/F installation of cubical panel board 16 SWG sheet M.S depth 30 cm to 60 cm with A1. bus bar andd interconnection suitable for switch gears i/c and making foundation etc as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 630 Amp, having breaking capacity 50 KA (Icu), four pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200 Amp, having breaking capacity 36 KA (Icu), four pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 Amp, having breaking capacity 30 KA (Icu), four pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 63 Amp, having breaking capacity 10 KA (Icu), four pole

Supply of XLPE insulated PVC sheathed Aluminium conductor armoured cable 1.1 KV conforming to IS 7098/ (Part-I) of following size 4 core 630 sqmm

Supply of XLPE insulated PVC sheathed Aluminium conductor armoured cable 1.1 KV conforming to IS 7098/ (Part-I) of following size 4 core 95 sqmm

Supply of XLPE insulated PVC sheathed Aluminium conductor armoured cable 1.1 KV conforming to IS 7098/ (Part-I) of following size 4 core 50 sqmm

Supply of XLPE insulated PVC sheathed Aluminium conductor armoured cable 1.1 KV conforming to IS 7098/ (Part-I) of following size 4 core 6 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonary open duct as required. Above 185 Sq mm and Up to 400 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonary open duct as required. Up to 35 sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5X400 sq. mm(82 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4X35 Sq. mm(32 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. Up to 35 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonary open duct as required. Up to 35 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Up to 35 sq.mm ( Clamped with 1 mm thick saddle )

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supply of XLPE insulated and PVC sheathed Al. conductor armoured cable confirming to IS 7098 ( Part -I ) / 1988 as required. (a) 2 x 10 sq mm

S.I.T.Cof 150 W LED flood light luminiare fitted with lens made of pressure die cast aluminium housing &toughened glass cover complete with the following specification as required (b)Total system voltage =150 watt +/-5% (c) Luminiare Efficiency =100 Lm/w(d) Power Factor >=0.95 ( e) Protection Class - IP -66

P & F of Hot Press Sheet Moulded Compound (SMC),fire retardant (Temp. resistanceup to 200 deg.C),IP-55 weatherproof pole box of inner dimension 200 mmx160 mmx98 mm(NS)complete with suitable arrangement for fixing of 2 nos.of 6 to 32 amp single pole MCB &63 A double pole isolator(MCB/Isolator exluded )with neutral link duly shorting on DIN channelwith 2 nos.of clamps with SS back plate of suitable size with danger monogram & SDMC property printed on the cover etc. as required

S.I.T.C LED tube type luminaire 20 watt rating complete with Polycarbonate housing batten integrated electronic driver prewired with high efficiency LED with the following specifications.(A) Total system wattage 20 watt+/- 5% ,(B) Luminous efficiency >= 95 Lumens/watt, © Power factor >= 0.95

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Providing and fixing of 600 mm sweep Air circulater complete with blades, jaal workable on 220/240 volts AC supply etc as reqd.

Providing of 450 mm sweep pedestal fan complete with blades, base plate, supporting rod, jaal workable on 220/240 volts AC supply etc as reqd. 450mm, Power : 65w, Air delivery : 85CMM, rpm : 1380 (Make Bajaj)

Supply of 15'' (380mm)sweep 1400 rpm exhaust fan heavy duty complete with shutters blades etc as reqd

Installation of exhaust fan in the existing opening including making good the damage,connection,testing,commissioning etc.as required.(a) Up to 450 mm sweep

Supply,installation,testing & commissioning of single / three phase monoblock pump set complete with all accessories workable on 240/415 volts,50 Hz AC supply.(a) 1 HP (0.75 KW) Single phase pump set,head from 12-30 mtrmtr,suction and delivery 25X25 mm

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. All works upto plinth level (For 04 Nos. main pump sets 1.2*2*1 = 2.4 cum each and for charging pump 1.2*0.8*0.6 = .576 cum)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-50D or more.

MASTER ELECTRIC STORE

Bansal Electric Store