SUPPLY INSTALLATION TESTING and COMMISSIONING OF 05-HP MONO-BLOCK PRIMING PUMPING UNIT FOR LIFT IRRIGATION SCHEME Unisoo Old.

Amount

Providing, installation, testing and commissioning of mono block type pump 30 meters head coupled to 5 HP motor, 50 Hz, 3, A.C induction motor of CG/KB/reputed make with other allied accessories. The priming pump shall be fitted in the base frame fabricated out of ISA 50×50 and 5mm thick by way of nuts bolts. The job includes providing and fitting of 5 HP DOL type starter L&T make fitted in the panel board along with copper wire from panel board to priming pump. The job includes providing and fitting of 50mm dia G.I. pipe on suction/delivery side. The priming pump shall be connected to the main pumping unit by way of cutting 40mm dia holes using oxyacetylene gas cutter and fitment of 40 mm dia G.I. Nipples by way of welding. The job involves providing and fitting of 03 No G.M. Gate Valve of size 40mm dia for main unit using 40mm dia G.I. nipples of required size. The fitment of G.I. pipe is to be made using M.S. Flanges of size OD= 125mm, ID = 50mm/40mm and 10mm. The job includes providing and fitting of nuts/bolts and R.I. cloth washers. The job also includes providing and fitting of 50mm dia foot valve. Mechanical/Electrical Features: i. 50mm GI flanged pipes for suction side = complete set ii. 50 mm GI flanged bend for suction side = one No. iii. 50 mm CI one side flanged check/foot valve = one no. iv. 40 mm GI flanged pipes for delivery side = complete v. 40 mm GI flanged bend for delivery side = all vi. 40mm GI nipples/short pieces duly flanged = all vii. 40 mm GM Gate valves ISI marked = 03 no. viii. M.S funnel with 17mm GI pipe pieces = one each ix. 3 phase 50 Hz 440±VD.O.L, starter ISI make = one No. x. 7/0.18 insulated copper conductor in flexible pipe = complete xi. Cement concrete foundation block = as required The job includes all unforeseen items as may be required at site.

M/s SAJAD ENGINEERING WORKS

M/S NEW BUHROO ELECTRICAL AND MECH ENGG WORKS