PROVISION OF ELEVATOR IN ATC TOWER AT INS HANSA UNDER GE (NW) VASCO

CAPACITY (kgs) : 340 Kg, 5 persons.

SPEED (mps) : 1

RISE (m) : 12 m

STOPS : 4 Stops With (all opening on the same side)

CONTROLLER TYPE : LVA/ACD

DRIVE : VF Regenerative (Closed Loop)

POWER SUPPLY : 400/415 Volts (3 Phase AC)

OPERATION : Full collective operation

CAR GROUP : One car (simplex)

MACHINE : PM Gearless

TRACTION MEDIA : Flat Coated Steel Belt

CAR FINISH : Rear Mid Panel = Stainless Steel Black Mirror Rear Corner Panels = Stainless Steel #4(Hairline) Side Mid Panels = Stainless Steel #4(Hairline) Side Corner Panels = Stainless Steel #4(Hairline) Front Panels = Stainless Steel #4(Hairline)

FALSE CEILING TYPE CD63 type false ceiling

FALSE CEILING FINISH : Stainless Steel #4(Hairline)

VENTILLATION : Cross flow fan

HAND RAILS : Stainless Steel Mirror Finish Handrails on rear car panels

FLOORING : GRANAMITE flooring by client, 20mm recess will be provided

CAR DOOR FINISH : Stainless Steel #4(Hairline)

LANDING DOORS FINISH : Stainless Steel #4(Hairline)

FIRE RATED DOORS : Fire rating-120mins

PIT DEPTH : 1350 mm

OVERHEAD 4200 mm

CAR and HOISTWAY DOOR TYPE : Central opening (CO) doors

DOOR OPERATOR : DC Door Operator

COP : FLAT17 COP FOR GEN2 STREAM LITE in Stainless Steel #4(Hairline)

CAR POSITION INDICATOR : Monochrome LCD-Blue Background and White font

HALL FIXTURES : O2000 HALL FIXTURE FACE PLATE : Stainless Steel #4(Hairline)

HALL BUTTON ARRANGEMENT : Pan Type

STANDARD FEATURES : Anti-nuisance Car Call Protection Independent Service (for Duplex only) Overload Device Nudging Emergency Firemen’s Service Emergency Car Light Unit Infrared Curtain Door Protection Door Time Protection Emergency Alarm Button Extra Door Time of Lobby and Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off

OPTIONS INCLUDED : Automatic Rescue Operation, Car Chime, Voice Synthesizer, Intercom, CCTV Provision

Supply, laying, testing and commissioning LT Cable XLPE insulated, galvanised steel strip armoured,1100 volts grade, multistranded aluminium conductor cable of cross sectional area 50 sqmm; 3.5 core conforming to IS:7098 part-I with latest amendments up to date and making cable connections by providing suitable aluminium lugs with proper crimping and steel glands and laid in trenches / ducts / floors / roofs or through pipes with saddles and fixing screws etc complete all as specified and directed . Note :- 1.(Excavation, Concrete cable protection cover and Clear Sand for cushioning will be measured and paid separately).

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr

Supplying and Laying precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm in trenches for protect to under ground cable complete all as specified.

Material and labour for PCC 1:3:6 type C1 using (20 mm graded stone aggregate ) for making good disturbed road surfaces including necessary use and waste of form work complete all as specified and directed

Supply and fix MCCB 100 amps 4 Pole , 25 KA , 50 Hz 415 Volts to be fixed in existing panel board after making addition alteration and making bus bar extension with necessary of suitable size all as specified and directed.

supply and fix copper strip 20 x 3 mm Earth continuity conductor fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc all as specified. all as specified.

Supply, installation, testing and commissioning LT panel board suitable for working on 3 phase, 4 wire, 415 volts, AC, 50Hz Outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation, factory fabricated made out of 3.15 mm thick CRCA sheet duly powder coated and shall be CPRI approved and as approved by GE. The Panel shall have front and rear opening, locking arrangement, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, aluminum bus bar duly covered with heat shrink sleeves colour coded duly fixed on DMC/SMC insulators, aluminum strip connection from bus bar to outgoing MCCBs and copper conductor cable of adequate size for MCBs, housed in a separate bus bar chamber and control wiring adequate size and length, outgoing MCCBs shall have extended bus bar links and Panel mounted on 50x50x5mm size MS angle iron frame duly painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) in foundation design subject to approval of GE as per site requirement. The minimum height, width and depth of panel is 1000x1000x450 mm respectively, minimum clearance from ground level is 450mm item complete all as specified and directed and comprising of following :- Note :- (i) contractor shall provide CPRI certification of the panel. (ii) All items incorporated in panel is ISI marked or IS specification .

(a) Incoming : MCCB 160 Amps 415 Volts – 01 No (b) Outgoing : MCCB 100 Amps 415 V - 01 Nos MCCB 63 Amps 415 Volts – 01 Nos (c) Digital voltmeter, with VSS -01 set, Digital, Ammeter, with CTs and ASS - 01 set (d) LED phase indication lamps RYB -01 set (e) Aluminum bus bar of adequate rating -01 set Note : All MCCBs Should be adjustable type.

Material and labour PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc.

Material and labour for re-inforced cement concrete Nominal mix Type B-1(1:2:4) using 20mm graded aggregate as in rafts,footings,foundation beam, plinth beams, base of columns, mass concrete etc complete.

Material and labour for Nominal mix type (1:2:4) using 20mm graded aggregate in columns, pillars, post and struts

Material and labour for MS TMT bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

Material and labour for MS TMT bars 5 mm dia and over, up to and including 10 mm dia in stirrups, spaces and binders.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete.

Material and labour for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed.

Material and labour hard core of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed to a true surface.

Dismantling of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar

Removing excavated material of soils from site to a distance not exc 50 mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and directed

Design supply and installation of lattice type galvanized steel structure with attached connectivity platform to bldg including all material, labour, fabrication, galvanization, inspection, preparation of drawing based on fabrication drawing provided by OEM, proto assembly, submission of proto corrected drawing etc. (Zinc coating 610 gms/ sqm) and steel materials shall conform to IS:2062- Latest revision(Hot rolled Medium and high Tensile structure steel) with Yield stress E250 for mild steel and Yield stress E350 for High tensile steel and all other relevant IS codes and Aluminum composite panel should be used to cover the exterior of the fabricated Lift structure complete all as specified and directed Note : (i) The design of the structure shall be as per OEM instruction and specification. (ii) The design shall be vetted by IIT/NIT/IISc before approval of GE

Comprehensive maintenance, repair, servicing, and breakdown attendance of the fully automatic electrically operated lift installed at the ATC Tower for a period of 12 months (first year after expiry of the defect liability period). The lift is a fully automatic Passenger/passenger Lift of 5-person capacity serving G+3 floors, operating at a speed of 1 metre per second, equipped with a single-speed motor and AC Variable Voltage Variable Frequency (VVVF) drive, along with all standard lift accessories. The scope of work includes as below:- (a) Daily checks and routine operational inspections. (b) Scheduled preventive maintenance at daily, weekly, monthly, quarterly, half-yearly, and yearly intervals. (c) Cleaning, lubrication, and adjustment of controller, motor, machine, guide rails, bearings, and door operating mechanisms. (d) Maintenance of automatic/digital control systems, door drive units, sensor/sliding doors, and all safety devices. (e) Replacement of lubricants, consumables, and all required spares, as directed, at no additional cost to the department. (f) Immediate attendance to faults and emergencies to ensure round-the-clock (24 × 7 × 365 days) serviceability of the lift. (g) Annual Load Test of Lift by Government-Authorized Lift Inspector including certificates, liaison, test arrangement, and rectification of remarks (h) The contractor shall ensure uninterrupted functionality and safety of the lift throughout the maintenance period without any extra cost to the Government.