Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-AOC INDEX NO D 381 HQ CE EC KOLKATA CAMP INS CHILKA PO NB CHILKA DIST KHORDHA ODISHA 752037 | KHORDHA | ODISHA | 752037 | ₹30.4 L | L1 | Accepted-AOC Accepted being L1 bidder |
| 2 | L2₹32.6 L+₹2.2 L (7.26%)Rejected-Finance | ₹32.6 L+₹2.2 L (7.26%) | L2 | Rejected-Finance Being L2 bidder |
| 3 | L3₹34.1 L+₹3.7 L (12.3%)Rejected-Finance | ₹34.1 L+₹3.7 L (12.3%) | L3 | Rejected-Finance Being L3 bidder |
Tender Value
₹29.7 L
EMD Value
₹59,320
Closing Date
22 Aug 2022, 6:00 pmClosed
Shri Avinash Mishra IDSE GE
Garrison Engineer (I) (CG) Bhubaneswar, Plot No 190/702, Kokila Residency, 2nd Floor, Anant Vihar, Post-Pokhariput, Bhubaneswar- 751020
PROVISION OF PARKING SPACE SHED FOR EXISTING TYPE II AND TYPE III MARRIED ACCOMMODATION
2022_MES_533615_2
8292/BBSR/06/E8
Open Tender
Miscellaneous Works
Item Rate
120 days
Gopalpur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (I) (CG) Bhubaneswar
₹59,320
Yes
14 Sept 2022
1 Aug 2022
24 Aug 2022
1 Aug 2022
22 Aug 2022
8 Aug 2022
1 Aug 2022 - 6 Aug 2022
Amount
Surface dressing not exc 15 cm deep in Hard/Dense soil complete all as specified and directed.
Excavation in trenches exc 1.5m deep & n.exc1.5m wide on plan in Hard/Dense soil and getting out complete all as specified and directed.
All as per item No 2 but exc 1.5 m depth beyond the first 1.5 m.
M & L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for TMT bars 10 mm dia and over cut to length bent to shape required including cracking bending hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement of fencing posts, columns, plinth beams in fencing complete all as specified and directed.
All as per item No 5 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for TMT bars 6 to 8 mm dia , cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified & directed.
M&L for form work to soffit of slab flat not exceeding 200mm thick horizontal or sloping rough finished surface complete all as specified and directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
M&L for RCC M - 30 Design mix Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC M - 30 Design mix Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M - 30 Design mix Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for RCC M - 30 Design mix beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.
Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M & L hardcore of broken stones of gauge n.exc 63mm ,deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.
M&L for PCC 1:5:10 type E2 as in sub base of floor complete all as specified and directed.
M&L 100 mm thick M-20 (Nominal mix) Type A-1, Plain cement concrete with using 20mm graded aggregate laid inalternate bays over sub base finished even and fair without using extra cement complete all as specified and directed.
M&L 100 mm th PCC 1:2:4 type B-1 using 20 mm graded aggregate as in flooring, finished fair and even complete all as specified and directed.
M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound,Grade ‘A’, complete all as specified and directed. Make:Tikitar or equivalent ISI marked.
M&L for Brick work with Fly ash Bricks straight or curved on plan exc 6 m mean radius built in Cement mortar 1:4 complete all as specified and directed.
M & L rendering 10 mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M & L rendering 15 mm thick on brick wall or concrete surface in cement mortar 1:4 mixed with water proofing compound at the rate of 3% by weight of cement, finished even and fair complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)
M & L rendering 5 mm thick on ceiling in cement mortar 1:4 finished fair and even smooth without using extra cement complete all as specified and directed.
M&L for preparation of newely plastered surfaces of wall and applying two coats of oil bond distemper and over one coat of primer on walls complete all as specified and directed.
Material & Labour for preparation of newly plastered surfaces and applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV Resistance as per TS 15489:2004 , Alkali & Fungal resistance ,dirt resistance exterior paint of required shade (Company Depot Tinted)with silicon additives @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm complete all as specified and directed.
M & L applying two coat of white wash on newly plastered surface of ceiling including preperation of the surface complete all as specified and directed.
M & L 75 mm th PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sqm complete all as specified and directed.
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.
M&L screed bed 15 mm thick cement mortar 1:4 on top of roof mixed with water proofing compound at the rate of 3% by weight of cement, finished even and smooth complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately).
Supply only water proofing compound complete all as specified and directed.
Providing precast cement concrete louvers, and jallies 25 mm thick type B-0 12.5 mm thick graded aggregate (measured solid) including all mouldings set in cement mortar 1:6 complete all as specified and directed.
M&L providing, cement concrete Type B0 (1:2:4) 12.5 mm graded aggregatein roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
Surface exc 30 cm deep and average 15 cm deep in any type of soil complete all as specified and directed.
M & L PCC 1:3:6 type C-2 (using 40 mm graded agg 100 mm thick in sub base complete all as specified and directed.
Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Make : Anjali tile/Ultra tiles/Mehtab tiles or equivalent makes.
Providing cement concrete, B-0 (12.5 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M&L for point wiring with 2 single core PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including PVC conduit with PVC boxes and 3mm thick laminated sheet top cover for light/fan/socket controlled by one switch complete with 1.5 sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green colour for earth continuity complete all as specified and directed
(a) One light point controlled by one single way switch .
(b) One 5 pin 5/6 Amp Socket outlet on the same board with other switches.
S&F switch piano flush type 5 Amps, single pole, one way complete all as specified and directed
Supply and fixing switch socket combination 3/5 pin 5 Amp flush type 240 volt.complete all as specified and directed
S&F for ceiliing rose three terminal surface type bakelite 65x50 mm complete all as specified and directed
S&F MCB distrubution board, SPN, double door, sheet steel, phosphatised, power painted with 200 amps bus-bar,neutral link,earth bar and din rail 240V,8 way complete all as specified and directed.
Supply and Fixing only MCB SPN,240V,6 Amp to 32 Amps,10KA complete all as specified and directed.
Supply and Fixing only MCB SP,240V,6 Amp to 32 Amps10KA complete all as specified and directed.
Supply and fixing energy saving environmental friendly, long life led Bldg security light fitting 25 watt made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperete driver compartment with IP 66 protection including Brackets, clamps, nuts, bolts, washers and electric connection complete all as specified and directed (Make :Cat Part No. ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or equivalent in Bajaj/ Philips)
Supply and fixing of a new generetion LED T5 Al batten a trendy wall/ ceiling mounted slim LED batten with extruded aluminium housing & integrated LED drive 20 Watt LED Visco Al Batten energy efficient ready to use pack including twin core twisted flexiable copper conductor cable of size 1 sq mm from connector to ceilling rose complete all as specified and directed (Make:- Surya, Havells, Phillips)
Supply and Laying XLPE LT UG cable PVC insulated , bedded armoured heavy duty electric cable 1100 volts grade with aluminium conductor of 10 Sqmm 2 Core laid in trenches or fixed on wall/floor/poles complete all as specified and directed.
M&L for sand cushioning for UG cables for protection in trenches laying clean dry sand complete all as specified and directed
M&L for laying unreinforced precast concrete cable cover,class LV ,Type 1, flat,size 250mmX150mmX40mm for cable protection complete all as specified and directed
Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel wire 4mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. mild steel TMT bars @ 150 mm c/c both ways, and with onehandle for lifting made out of 10 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) complete all as specified and as directed.
Supply and laying Galvanised Iron pipe 40 mm dia bore (light grade) with all fittings, in trenches for protection of under ground cable complete all as specified and directed
M&L for sub main wiring complete with 2 single core multi stranded copper conductor 1.5 Sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI marked not less than 25 mm dia concealed, including marking good disturbed surface or wall including single core multi stranded copper conductor 1 Sqmm size as earth wire drawn in same conduit complete all as specified and directed
M/s Jai Sree Hari
P JAGANNADHA RAJU
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .