PROVN OF SPL REPAIR TO BLDG NO. P-04, DRAINAGE, ROOF TREATMENT AND CERTAIN MINOR WORKS UNDER GE SATWARI

Amount

Taking down CI/PVC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.

Disconnecting existing tanks, 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required including reconnecting and re-fixing in position complete all as specified.

Disconnecting existing tanks, 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required including reconnecting and re-fixing in position complete all as specified.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down shutter of any description exc 1.0 sqm but n. exc 2 sqm each all as specified and directed By Engr-in-charge.

Demolition of brick work or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars etc and removing all the demolished material outside Cantt area complete all as specified.

Taking down cement plaster of any description on brick/stone/concrete wall including racking out joints, hacking for key, scrubbing down with water and removing all the demolished material outside cantt area complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds fixed with screws to timber frame work complete (up to 4th storey with necessary scaffolding) all as specified and as directed by Engineer-In-Charge.

Taking up or down GI tubing and connection incl cleaning for refixing or removal bore of pipe 15mm dia complete all as specified and directed.

Taking up or down GI tubing and connection incl cleaning for refixing or removal bore of pipe 20 mm dia complete all as specified and directed.

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr complete as specified.

Demolition of cement concrete (unreinforced) ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material outside cantt area complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) cpmplete all as specified.

Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets

Dismantling timber scantlings 40 sq. cm and over in section, in any position (framed work) complete all as specified.

Description all as srl item No 18 in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed Work) all as specified.

Taking down fan,sealing cable end, dismantling blades and removing fan and blades to store

Dismantling of AC plain or corrugated sheeting, any gauge, thickness, including nanital or similar pattern roof covering.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the cantt area complete all as directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m all as specified and directed by Engr-in-charge/GE.

Cutting chases, pinning in. making good to facings in brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engineer-In-Charge.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting,grouting with cement and sand slurry 1:3 ( by weight)

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified.

Material and labour for brick work with subclass ‘B’ bricks, old size bricks, straight or curved on plan exceeding 6.0mtrs mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-In-Charge.

Material and labour for walling of random rubble, uncoursed, well bonded, stone masonary, bedded and solidly hearted, built in cement mortar 1:4 complete all as directed.

Description all as per Srl item No 28 here in before but except stone complete all as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms,moulds,mitred/stopped ends etc complete all as specified and as directed by Engineer-In-Charge.

Add or deduct for each 25mm girth or part thereoff over or under 30cm inner girth in cement concrete using extra cement including forms,moulds,mitred/stopped ends etc complete all as specified and as directed by Engineer-In-Charge.

Material and labour for flush pointing to random rubble masonary,uncoursed or brought upto course walling in CM 1:4 complete all as specified.

Material and labour for PCC 1:2:4, 25mm thick type B-0 using 12.5mm crushed stone aggregated as in floor finished even and rough all as per specified and directed.

Plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate), 75mm thick, as in plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight, complete all as specified and as directed by Engineer-In-Charge.

Material and labour Plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in roof padding, mass concrete and similar work complete all as directed by Engr-in-charge.

Material and labour for plain cement Concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and as in benching and similar work including necessary form work complete all as specified and as directed.

Material and labour RCC type B1, 1:2:4 using 20 mm graded aggregate as in Slab supported with wall, beam, column in floor, roof, landing etc including necessary formwork.

Material and labour for PCC (1:3:6) Type C-2, using 40mm graded aggregate as in subbase of drains etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in surface channels and drains including necessary formwork complete all as specified and directed.

Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust and applying roof treatment as below:-- (i) Rendering 15mm thck in CM 1:4 mixed with integral Water proofing compound on concrete surface in roofs incl applying cement slurry @ 3 Kg per Sqm finishing even and fair without using extra cement ( WPC shall be measured and paid for separately) (ii) Applying a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely and applying a coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.20 kg /sqm (iii) Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame (iv) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane MAKE-IWL/Pidilite

Supply and fixing pressed steel frames( factory made) made of cold rolled mild steel sheets of 1.25mm thickness as indicated in IS for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

Supply and fixing in repairs Pressed steel frame (factory made) of size 125x60mm for doors with double rebated including mild steel hinges medium weight 100 mm long and 25x3 mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc., complete as specified, supplied and fixed including back filling of chowkats in PCC 1:3:6 and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as spd and as directed.

Supply and fixing pressed steel cup board frame made to size from MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:3:6 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

Material and labour 35 mm thick 2nd class hard wood plain framed panelled shutter (two panels) of factory made with lock rail and panel of 12 mm thick veneered particle board with commercial vace veneering on both faces including wooden beads on both sides, one coat of pink primer. The size of rail and stile as per IS-1003 part-I kiln seasoned and chemically pressure treated complete all as directed.

Supply and fixing 35mm thick 2nd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads complete all as directed.

Supply and fixing in repair Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing, including making good to disturbed surface of walls, complete all as specified and as directed by Engineer-In-Charge.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)

Supply and fixing Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

Supply and fixing aluminium anodized door handle size 150mm size of extruded section complete all as specified and directed.

Supply and fixing aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

Supply and fixing in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.

Supply and fixing in repair Floor door stopper of aluminium alloy body size 140 mm (Overall length of cover plate) and tongue, anodised, with hard drawn steel spring, fixed in floor. (ISI Marked)

Supply and fixing in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

Supply and fixing in repair 18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with leaping (15 mm thick three side and 20mm thick leaping hinge side) around the shutter and fix with screws to etc complete all as specified and directed.

Material & labour Aluminum Powder coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 5.50 mm thick coloured/tinted glass panes including aluminium grill and all necessary fittings and fixtures complete all as per Engr-in-charge.

Material & labour Aluminum Powder coated grills fixed to sliding aluminium windows with all fixing arrangement,grill apperture 50 mm 5.50 mm thick minimum weight of grill 2.25 kg/sqm including all necessary fittings and fixtures complete all as per Engr-in-charge.

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung including pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specified and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Supply and fixing Aluminium alloy, anodised, sliding door bolt size 250mm (length of bolt) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete al as specified. (ISI Marked)

Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets ( Model:- SS 25 BR, Vista) near to ends with stainless steel finials ( Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings)

Supply and fixing Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

Supply and fixing in repair Stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.8mm and fixed with stainless steel wire staples

Supply and fixing Stainless steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.8mm and fixed with stainless steel wire staples

Material and labour for rendering 5mm thick on concrete surfaces as in ceiling in cement mortar 1:4 finished even and smooth without using extra cement..

Material and labour for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified.(including all scaffolding,lifting arrangement for three story building on exteral surfaces)

Material and labour for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified.(including all scaffolding,lifting arrangement for three story building on exteral surfaces)

Material and labour Non - skid Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match the surface over and including 15mm thick screed bed in C:M 1:4. Make : Somany,Kajaria,Orient ( sample as approved & kept in GE's sample room)

Material and labour glazed ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and including 10 mm thick rendering in CM 1:4 all as specified. Make : Somany,Kajaria,Orient ( sample as approved & kept in GE's sample room)

Material and labour 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

Material and labour Vitrified Ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in C:M 1:4. Make : Somany,Kajaria ( sample as approved & kept in GE's sample room)

Description all as item no 70 but as in verical surfaces such as dado/skirting over and including backing coat of CM 1:4,10 mm thick complete etc.

Preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying two coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered surfaces of wall and applying two coat of cement base paint including a base coat of primer surface complete all as spd

Preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 2 to 3 mm thick and one coat of primer complete all as specified.

Preparation of old decorated brick /concrete/ plastered /un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying two coat of oil bound distemper on walls, pillars, cornices surface including making good uneven surface/holes with 3 mm Birla wall care putty coloured in same shade etc. complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls to achieve smooth and even surface and applying two coats of distemper oil emulsion over and including one coat of primer on plastered surfaces, preparatory to distempering complete including making good uneven surface/holes with 3 mm Birla wall care putty coloured in same shade etc complete all as specified and directed.

Preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying two coat of cement based paint on old decorated surfaces complete all as specified and directed.

Material and labour for applying two coat of synthetic enamel paint on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper or grinding by hand grinder to make surface even and smoth and applying primer where required (up tp 4th storey with necessary scaffolding) complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified.

Material and labour for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

Material and labour for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

Material and labour for preparation of old decorative plastered/concrete surface of wall, chajja, facia, face of columns, beam etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffolding including necessary filling of wall care putty 3 mm thick on uneven surface as and where required all as specified.

Material and labour for preparation of new decorated/ plastered/concrete surface of wall, chajja, facia, face of columns, beam etc and applying two coats of weather proof exterior emulsion (APEX) over one coat of primer with necessary scaffolding including necessary filling of wall care putty 3 mm thick on uneven surface as and where required all as specified

Supply and fixing in repair under counter basin with fixing accessories set, size: 555 x 425 x 195mm, Oval shape, complete all as specified. Make :- Jaquar, Cat No- FLS-WHT-5701 or equivalent in Kohler

Supply and fixing in repair Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete al as specified. Make:- Jaquar, Cat No- CQT-CHR-23273UPR or equivalent in Kohler.

Supply and fixing in repair sink mixer with swinging cast round shape spout ( wall mounted model) with Connecting Legs & Wall Flanges complete all as specified. Make:- Jaquar, Cat No- CQT-CHR-23309 or equivalent in Kohler.

Supply and fixing in repair chromium plated Bib Cock cast copper alloy, chromium plated fancy type screwed for iron pipe, 15 mm bore complete all as specified. Make :- Jaquar, Cat No- CQT-CHR-23037 or equivalent in Kohler

Supply and fixing in repair angular stop cock with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified. Make:- Jaquar, Cat No:- OPP-15059PM or equivalent in Kohler

Supply and fixing in repair chromium plated bottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipe & wall flange., complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-769L250X190 or equivalent in Kohler

Supply and fixing in repair 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers (Both Side) Without Nipple (Suitable for Geysers) complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-805B or equivalent in Kohler

Supply and fixing in repair 450 mm long braided hose with M10x1 nipple, 15 mm nut,O-ring and rubber washer (suitable for Basin Mixers) complete all as specified. Make:- Jaquar, Cat No:- ALD-CHR-803AB or equivalent in Kohler

Supply and fixing in repair Vitreous china wash down water closet white, Size-370x640x400, with 'S' trap, including soft closing seat cover , closed pattern with flat bottom, complete all as directed. Make:- ESSCO Cat Part No- ECS-WHT-751PS or equivalent in Cera

Supply and fixing in repair single lever basin mixer without Popup waste with 450mm Long Braided Hoses screwed down for iron pipe and fixed of 15mm dia all as per directed and specified. Make :- Jaquar, Cat no OPP- CHR-15011BPM or equivalent in Kohler

Supply and fixing in repair 2 way CP Bib Cock cast copper alloy, chromium plated fency type, sutable for 15 mm GI pipe, complete all as specified. Make :- Jaquar, Cat No- CQT-CHR-23041 or equivalent in Kohler

Supply and fixing in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar, Cat No- ACN-1173 or equivalent in Kohler

Supply and fixing in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.

Supply and fixing in repair CP Overhead Shower 120mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System,including shower arm minimum length 190 mm complete all as specified. Make :- Jaquar, Cat No- OHS-CHR-1989 or equivalent in Kohler.

Supply and fixing in repair Concealed Stop valves,fancy type ,cast copper alloy,screwed down,high pressure,with long shank and cup,screwed both ends for iron pipe or for unions and fixed complete all as specified.Make -Jaquar or equivalent in Kohler

Supply and fixing in repair Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified. Make :- Jaquar, Cat No- HSH-CHR-1731 or equivalent in Kohler.

Supply and fixing in repair chromium plated, single towel rail 600mm long complete all as specified. Make:- Jaquar Cat No- AKP-CHR-35711P or equivalent in Kohler

Supply and fixing in repair chromium plated towel rack 600mm long without lower hangers, complete all as specified. Make :- Jaquar Cat No- AKP-CHR-35781P or equivalent in Kohler

Supply and fixing in repair chromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-573 or equivalent in Kohler

Supply and fixing in repair Shower Arm Casted 190mm Long Light Body Round Shape for Wall Mounted Showers with Flange complete all as specified. Make :- Jaquar, Cat No- SHA-CHR-477P or equivalent in Kohler

Supply and fixing in repair chromium plated, towel ring square, complete all as specified. Make:- Jaquar Cat No- AKP-CHR-35721P or equivalent in Kohler.

Supply and fixingin repair soap dish holder complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35731P or equivalent in Kohler

Supply and fixing in repair chromium plated toilet roll holder, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35751P or equivalent in Kohler

Supply and fixing in repair Glass shelf 600mm long, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35771P or equivalent in Kohler

Supply and fixing in repair Wall Hung Basin with Fixing Accessories Set, Size : 555 x 425 x 195mm, complete all as specified. Make :- Jaquar, Cat No- CNS-WHT-811 or equivalent in Kohler.

Supply and fixing in repair Chromium Plated Urinal with complete accessories set as waste coupling,waste spreader,spreaderof size 355x340x535 mm complete all as specified Make:- Jaquar, Cat Part No- URS-WHT-13261 or equivalent in Kohler

Supply and fixing in repair WC Orissa pattern white with integral foot rest 585x 445 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified including in taking out and removal of old WC seat) Make:- ESSCO, Cat Part No- ECS-WHT-451LE or equivalent in Kohler

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets,PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/ damaged floor/ surfaces, fixing in repair, complete all as specified and as directed by Engineer-In-Charge

Supply and fixing 75 mm bore PVC (SWR)Type B pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or fixed with wall complete all as directed.Make:Finolex/Kisan/Supreme

Supply and fixing 110 mm bore PVC (SWR)Type B pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches or fixed with wall complete all as directed.MakeFinolex/Kisan/Supreme

Supply and fixing in repair PVC (SWR) bends any radius 75mm bore Make :- Finolex/Kisan/Supreme

Supply and fixing in repair PVC (SWR) bends any radius 110 mm bore Make :- Finolex/Kisan/Supreme

Supply and fixing in repair PVC (SWR) junction single, (Single T) equal or unequal with oval access door( Grade " B " ) 75 mm bore complete all as specified and as directed by Engineer-In-Charge. Make :- Finolex/Kisan/Supreme

Supply and fixing in repair PVC (SWR) junction single, (Single T) equal or unequal with oval access door( Grade " B " ) 110 mm bore complete all as specified and as directed by Engineer-In-Charge. Make :- Finolex/Kisan/Supreme

Supply and fixing in repair UPVC (SWR) reducers( Grade " B " ) 110 mm bore complete all as specified and as directed by Engineer-In-Charge. Make :- Finolex/Kisan/Supreme

Supplying and laying of CPVC pipes (outer dia of pipe 20 mm) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and laying of CPVC pipes (outer dia of pipe 25 mm) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of Brass Elbow for CPVC pipe (outer dia of pipe 20 mm) complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of Brass Elbow (3/4 X ½) for CPVC pipe (outer dia of pipe 20 mm) complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of Brass Tee for CPVC pipe (outer dia of pipe 20 mm) complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of Male Brass Threaded Adaptor (MTA/ MBTA) ) for CPVC pipe (outer dia of pipe 20 mm) complete all as specified and as directed by Engineer-In-Charge.Make Finolex/Kisan/Supreme

Supplying and fixing of Male Brass Threaded Adaptor (MTA/ MBTA) ) for CPVC pipe (outer dia of pipe 25 mm) complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of Female Brass Threaded Adaptor (MTA/ MBTA) ) for CPVC pipe (outer dia of pipe 20 mm) complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of Female Brass Threaded Adaptor (MTA/ MBTA) ) for CPVC pipe (outer dia of pipe 25 mm) complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of Tank Adaptor (FTA/ FBTA) for CPVC pipe (outer dia of pipe 25 mm) complete all as specified and as directed by Engineer-In-Charge.Make Finolex/Kisan/Supreme

Supplying and fixing of Union(FTA/ FBTA) for CPVC pipe (outer dia of pipe 20 mm) complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of Union(FTA/ FBTA) for CPVC pipe (outer dia of pipe 25 mm) complete all as specified and as directed by Engineer-In-Charge. Make Finolex/Kisan/Supreme

Supplying and fixing of ball valve (FTA/ FBTA) for CPVC pipe (outer dia of pipe 20 mm) complete all as specified and as directed by Engineer-In-Charge.Make Finolex/Kisan/Supreme

Supplying and fixing of ball valve (FTA/ FBTA) for CPVC pipe (outer dia of pipe 25 mm) complete all as specified and as directed by Engineer-In-Charge.Make Finolex/Kisan/Supreme

Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling .Make: Prayag Cat No 3272,Hindware,Somany,CERA,Jaquar

Supply and fixing PVC (SWR) 'p' trap complete all as specified.

Supply and fixing in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

Supply and fixing in repair PVC (SWR) floor trap 75 mm bore type B , plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair 75 mm bore PVC (SWR) multi floor trap type B , plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-In-Charge.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

Supply and fixing 75 mm bore UPVC (SWR) Type B vent cowl complete all as directed.

Supply and fixing 110 mm bore UPVC (SWR) Type B vent cowl complete all as directed.

Supply and fixing UPVC type B pipes 110 mm bore as rain water pipe single socketed in any length with rubber ring joints fixed complete to walls and ceilings or laid in floors,weight of pipe not less than 0.70 kg /mtr (ISI Marked) complete all as specified and as directed by Engineer-In-Charge. NOTE: Work to be carried out up to 4th storey bldgs in any condition of working location/area.

Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 1000 liters capacity, (cylindrical vertical with closed top) triple layered,white,hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore pipe, including making connections complete all as specified. Make Sintex,Kissan

Material & labour for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as directed by the Engineer-in-Charge.

Supply and fixing TMT bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as specified.

Supply and fixing structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) as in roof trusses (framed), purlins, crane gantries, rails and fastenings, heavy brackets framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified.

Supply and fixing Steel work in tubular trusses/ vertical post , including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified.

Material and labour for grinding,rubbing and mirror polishing with machine on existing kota stone/moisac flooring/skirting laid in position including all necessoy repair work and filling of joints with grey cement mixed with pigment to match the shade complete all as directed by the Engineer-in-Charge.

Supply and fixing 3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, (up to 4th storey with necessary scaffolding) all as specified.

Supply and fixing Figured glass, pin head type and glazing with oil putty and clips in squares n exc 0.5 sq.m in each pane of thickness 3mm (up to 4th storey with necessary scaffolding)up to complete all as specified

Material and labour Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

Supply and fixing in repair Pre-painted Plain, Aluminium sheeting (0.61 to 0.71 mm thick) Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) with self tapping screws as specified complete all as specified. Make:- Jindal( JSW),Tata

Supply and fixing GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engr-in- Chage. Make: Gyproc,Lafarg Boral Gypsum India,India Gypsum

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose to fan

Supply and fixing fan down road made out of 15 medium grade GI pipe of length not less than 75 cm including drilling the hole nut bolt and locking washer etc as directed

Supply only Water proofing compound liquid.

Soakage well, 3.00m dia and 3.00 m depth below inlet pipe (depth of inlet pipe 45cm below normal ground) including excavation and earth work in any type of soil, cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundation, brick work in CM 1:4, RCC 1:2:4 Cover slab, manhole cover with angle iron frame, appropriate and suitable size brick bat filling, SWG junction 150mm bore CI vent pipe and Cowl etc. complete all as specified and as shown on drawings. (Soak well shall be constructed as per CE Pathankot Zone TD No CEPZ/C-TD/013/13 Sheet 1 to 5).

E/M ITEMS Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good disturbed surface of walls and roofs to the existing surface & finish complete all as specified and as directed.

Material and labour for complete point wiring for One light/fan point controlled by one, one way switch complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in existing conduit terminated into suitable module Metal sunken Boxes of Make : Havells including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :- Make of wire: Havells/Polycab. Note: suitable Module flush boxes as specified to be provided in replacement of MS/Galvanised sunken boxes and measured seperately..

Description all as per srl item No 161 but one 3 pin socket outlet 6 amps independent

Description all as per srl item No 161 but one 3 pin socket outlet 6 amps on same board

Description all as per srl item No 161 one 3 pin 5 amps socket outlet independent but below the switch board of light points in the same vertical plane,

Description all as per srl item No 161 one bell/ buzzer point controlled by one, complete all as specified and directed.

Description all as per srl item No 161 above but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Material and labour for point wiring one light/fan point controlled by one, one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised suitable size sunken boxes incl white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed.Make of wire: Havells/Polycab.

Description all as per srl item No 167 but one 3 pin socket outlet 6 amp independent board.

Description all as per srl item No 167 but one 3 pin socket outlet 6 amp on same board.

Description all as per srl item No 167 but One 3 pin 6 amps socket outlet independent but below the switch board of light points in the same vertical plane,

Description all as per srl item No 167 but One bell/ buzzer point controlled by one, complete all as specified and directed.

Description all as per srl item No 167 but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in continuous earth wire. complete all as specified and directed.

All as per srl item No 167 above but for AC plug in socket independent with cable of size 4 Sqmm for point wiring and 4 sqmm as in continuous earth wire.(Note Plug in Socket will be measured and paid Seperatetly)

S & F musical door bell, AC 230 volt single phase Make havells /Legrand. Complete all as specified and directed.

Material and labour for modular type switch one way 6 amps, 1 module complete all as specified and directed.Make Havells Crabtree Model athena 10ax one way catpart no. ACASXXW101 or equivalent in Legrand

M&L modular type Bell Push, Make havells crabtree model athena 10A onwe way bell push catpart no. ACASBXW101, 1 module or equivalent in Legrand complete all as specified and directed.

Material and labour for modular type socket 5 pin, 6 amps combined 2 module complete all as specified and directed.Make havells crabtree model athena catpart no. ACAKPXW065 or equivalent in Legrand

M&L for modular type switch, one way 16 Amps, 1 module complete all as specified and directed Make havells crabtree model athena 16AX. 1 WAY catpart no. ASXXW161 or equivalent in Legrand

M&L for modular type socket 5 pin, 6 A/16 Amps combined 2 module complete all as specified and directed.Make havells crabtree model athena catpart no. ACAKCXW163 or equivalent in Legrand

S&F energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalant in Crompton/ Philips/ Wipro

Supply and fixing of energy saving and environmently friendly pressure die cast aluminium IP65 luminaire with high power LED as light source of rating 25Watt LED 5000K suitable for pole dia 35mm complete .Make Havells Cat Part No LHEWDRP7PN1W025 or equivalent IN C&S / Phillips /Crompton. complete all as specified and directed

Refixing of existing decorative wall fittings

Supply and fixing Modular GI Metal Flush Box 12 module Make havells crabtree catpart no. ACTXMIIX12.or equivalent in Legrand complete all as specified and directed

Supply and fixing Modular GI Metal Flush Box 8 module Make havells crabtree catpart no. ACTXMIIX08 or equivalent in Legrand complete all as specified and directed

Supply and fixing Modular GI Metal Flush Box 6 module Make havells crabtree cat part no.ACTXMIIX06 or equivalent in Legrand complete all as specified and directed

Supply and fixing Modular GI Metal Flush Box 4 module Make havells crabtree catpart no. ACTXMIIX04 or equivalent in Legrand complete all as specified nd directed

Supply and fixing Modular GI Metal Flush Box 3 module Make havells crabtree catpartno. ACTXMIIX03 or equivalent in Legrand. complete all as specified and directed

Supply and fixing Modular GI Metal Flush Box 2 module Make havells crabtree catpartno. ACTXMIIX02 or equivalent in Legrand. complete all as specified and directed

Supply and fixing White Cover Plate with Frame 12 module Make havells crabtree model athena catpart no.ACAPNCWV12 or equivalent in Legrand.Complete all as specified and directed

Supply and fixing White Cover Plate with Frame 8 module Make havells crabtree model athena catpart no.ACAPNCWV08 or equivalent in Legrand.Complete all as specified and directed

Supply and fixing White Cover Plate with Frame 6 module Make havells crabtree model athena catpart no.ACAPNCWV06 or equivalent in Legrand.Complete all as specified and directed

Supply and fixing White Cover Plate with Frame 04 module Make havells crabtree model athena catpart no.ACAPNCWV04 or equivalent in Legrand.Complete all as specified and directed

Supply and fixing White Cover Plate with Frame 03 module Make havells crabtree model athena catpart no.ACAPNCWV03 or equivalent in Legrand.Complete all as specified and directed

Supply and fixing White Cover Plate with Frame 02 module Make havells crabtree model athena catpart no.ACAPNCWV02 or equivalent in Legrand.Complete all as specified and directed

Supply and fixing of picture light Make PHILIPS model MUZIRIS-31403 catpart no. 919215850796 or equivalent in Legrand. complete all as specified and directed

Supply and fixing of bed side light fitting Make philips model 48042 or equivalent in Legrand 3watt led fitting.complete all as specified and directed

Supply and fixing of decorative wall Lights Model : Eisa antique Vintage Metal Glass Shade Wall Lamp Vintage sconce Pack Of 2 . Make : Eisa

S&F of decorative ultra slim square profile linear LED lightining fixture with extruded polycorbonate enviromental friendly energy efficint fitting Make Havells model DELITE led 9 watt Cat part No LHEXBTP7UN1W009 or equivalent in Legrand. complete all as specified and directed

Supply and fixing of bracket made out of GI pipe 1.2 Mtr long 35mm dia light grade bent to shape as directed incl clamps made out of 25 x 4 mm flat iron for fixing bracket suitable for fixing on wall incl fastners of reqd size incl painting with one coat of aluminium paint over a coat of red oxide primer all as directed.

Supply, installation, testing & commissioning of totally enclosed feeder pillar outdoor type (IP-55) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powder coated double door type (independent cabin including locking arrangement for each MCCBs, bus bar chamber enclosed complete suitable for operating on 415 Volt 50 Hz AC supply internally wired with copper conductor having legs 45 cms made out of 40x40x6 mm angle iron grouted on brick masonary platform upto 30 cms. Brick masonary platform should be 60 cms above the Ground Level. Comprising the following:- .Note:- (i) The panel shall be front operated with cable entry from the bottom with cable glands. The fault with standing capacity shall be 36 KA. Earth bus shall be part of the main feeder pillar. (ii) Fabrication of feeder pillar box to be approved by CPRI width of the panel not less than 40 cms. (iii) Cost for construction of platform for panel of brick masonary work in CM 1:6 with foundation PCC 1:4:8 type D-2 including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No Extra payment will be made. (iv) Mccb's should be connected with extensions terminals at both side (incoming and outgoing).

Supply and fix modular type fan regulator step down 120 Watt 2 Module complete all as specified and directed.Make havells crabtree model athena catpart no. ACARFHW005 or equivalent in Legrand

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fixing LED tube light fitting 18-20 W LED, 230V, Batten type complete in all respect . Cat part No DMLN1LT8-16 of Crompton or equivalent in Wipro, Havells alongwith LED tube rod with heat dissipation capability suitable for G-13 base tube lights base fluorescent T8/T12 luminaries, 20 watt LED wattage with colour temp of 5700 K 1800 lumens and with surge arrestor complete in all respect. Cat Part No LTT8-20 of Crompton or equivalent in Havells, Wipro. Note:- The LED batten and LED tube rod shall be of same make.

Supply and fixing AC single phase 240 Volt 50Hz ceiling fan of size 1200mm sweep 5 star rating with canopy and hanging rod with all accessories incl nuts, bolts, clamps etc., complete all as specified and directed. Make : Havells cat part No ES-50 premium 5 star ISI marked, Crompton cat part No : Entrust 50

Supply and fixing lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and fixing Storage type water heater Geyser of Capacity 50 Ltrs 5 Star Rating alongwith provn to fix with fastening Bolts Make Havells/Jaquar/Bajaj, complete all as specified and directed incl dismanteling of old geyser and depositing to MES store.

Supply and fixing Storage type water heater Geyser Horizental type of Capacity 50 Ltrs 5 Star Rating alongwith provn to fix with fastening Bolts Make Havells/Jaquar/Bajaj, complete all as specified and directed incl dismanteling of old geyser and depositing to MES store.

Supply and fix Wall mounted Voltage stabilizer for automatic operation, single phase naturally air cooled indoor /outdoor type & designed for input variation between 90 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA Make V-Guard./Vinitec/Sinetrac

Supply and fix Wall mounted Voltage stabilizer for automatic operation, single phase naturally air cooled indoor /outdoor type & designed for input variation between 90 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 6 KVA Make V-Guard./Vinitec/Sinetrac

Aluminium strip 25 x 3.15 mm with saddle and fixing screws etc for roof conductors and down conductors above ground, Structural steel work as in cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including stainless steel nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed by Engineer-in- Charge.

GI strip 32 x 6mm buried in ground as earth continuity conductor for loop earthing all as directed.

GI tubing (light grade) 40mm dia for holding of air termination rod.

Taking out old fixed aluminium strip of any size and re-fix with stainless steel bolts, saddles with fixing screws complete all as speficied and directed by Engg-in-Charge.

Supply and fixing LED lamp suitable for B22 holder of capacity 7watt. Make : Havell's/bajaj/Philips/Wipro.

Supply and fixing Exhaust fan 300 mm sweep, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl taking down of unsv exhaust fan complete all as specified and directed. Make : Crompton/Bajaj/Havells.

Supply and fixing sub main wiring with single core cable 2x 4 sq mm PVC FRLSH insulated Unsheathed stranded copper conductor cable Make Havells1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x4 Sq mm PVC FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.Make of wire: Havells/Polycab.

Supply and fixing sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.Make of wire: Havells/Polycab.

Supply and fixing sub main wiring with single core cable 2x 10 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x10 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed Make of wire: Havells/Polycab. .

Supply and fixing sub main wiring with single core cable 2x 16 sq mm PVC FRLSH insulated Unsheathed stranded copper conductor cable Make Havells 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x16 Sq mm PVC FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.Make of wire: Havells/Polycab.

Supply and fixing Sheet metal enclosure factory made for DBs single pole and neutral double door SPN Metalica dfistribution board sparkling white 240 volts 12 waycatprt no. DHDNSHODAW12 Make havells with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces all as specified and directed

Supply and fixing MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series. Make:- Havells catpart no. DHMGCSNF006-032 or equivelent of legrand

Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10KA, 'C' series Make havells catpart no. DHMGCSPF006-032 or equivelent of legrand

Supply and fixing TPN Metallica Distribution board sparkling white catpart no. DHDNTHODAW06 Make Havells 6way IP-43 and IK-09 protected fitted with fully insulated copper busbars,insulated neutral bar ,earth bar ,door earthing, Blanking plates double door suitable for 4 pole MCCB 100A,16 KA as incommer and out going MCBs 6 ways complete all as specified and directed. Note:- Rate includes MCCB MCBs shall be measured and paid separately,DB and MCB shall be of same make.

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps Make havells catpart no.DHDPUSN020 rating complete all as specified and directed.

Supply and fixing of PVC Exhaust fan 250mm Sweep complete incl taking down of the old unsv exhaust fan and depositing the same in MES Store Yard.

Supply and fixing hanging Shandelier light complete in all respect along with accessories and hanging arrangement complete all as specified.

Material and labour for Earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground, ( Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to and including galvanised iron earth strip 32 X 4 mm by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all round the earth plate including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 15mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 40mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lstrip protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

Material and labour for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

M/S OM GUPTA

M/S PARAMJEET SINGH

M/S K D Construction Co

M/S ANIL MAHAJAN

M/S shakti steel industries